Home > JVC > Headphones > JVC Haw600rf Owners Manual

JVC Haw600rf Owners Manual

Here you can view all the pages of manual JVC Haw600rf Owners Manual. The JVC manuals for Headphones are available online for free. You can easily download all the documents as PDF.

Page 41

3445
Parts identification
123
45
6
Base station (transmitter and battery charging unit)
Back side
23167
Headphones
1  CHARGE indicator (6)
2  POWER indicator (7)
3  Battery charging terminal (6) See pages in parentheses for details.
4  CHANNEL selector (8)
5  AUDIO IN jack (4)
6 DC IN 
 jack (4)
LeftRight
1  AUTO SCAN button (7, 8)
2  AUTO SCAN indicator (7)
3  VOL (volume) (7)
4  Ear pad (5)
5  Battery charging terminal (6)
6  POWER button (6, 7)
7  POWER indicator (6, 7)
HAW600RF_B.indb...

Page 42

4
Connection
 
TV, audio amplifier, VCR, 
DVD player, PC, etc.
1  Connect the base 
station to the AV 
equipment.
2  Connect the AC 
adaptor to the base 
station.
3  Connect the AC 
adaptor to the AC 
outlet.
112
3
To AC outlet
(AC 230 V, 50 Hz) Conversion cord for 
stereo pin jack
(supplied)Connection cord 
(supplied)
Plug adaptor for 6.3 mm Phono 
jack (supplied)
Plug adaptor for monaural mini 
jack (not supplied)
To stereo mini jack
Note: 
Do not use any other AC adaptor than the supplied AC adaptor....

Page 43

5
1  Take off the ear pad of the right 
headphone.
2  Take off the battery covers.
3  Install the batteries.
Match the polarity (+ and –) on the batteries 
with the + and – marking on the battery  
compartments.
•  Insert the – terminal of the battery at 
first.
Be sure to use the supplied exclusive 
battery. Do not use any other 
rechargeable or dry cell battery, which 
may cause malfunctions or damage 
the unit. 
Battery installation
4  Put on the battery covers.
5  Put on the ear pad.
1  Insert the...

Page 44

6
Charging the battery
The base station works as the battery charging 
unit. Charge the rechargeable battery before 
starting to use the headphones.
You can continuously use the headphones for 
about 10 hours after full battery charge.
1  Make sure that the headphones are 
turned off.
You cannot charge the battery of the 
headphones when the headphones 
are turned on. Press POWER to turn 
the Power indicator off.
2  Put on the headphones on the 
base station so that their charging 
terminals contact...

Page 45

7
Basic operations
Listening to the sound from the base 
station
The base station works as the FM transmitter 
and send sound to the headphones.
Precaution
Turn down the volume of the headphones with 
the VOL dial before turning on its power to 
avoid excessive volume.
1  Start playback on the AV 
equipment connected with the 
base station.
The base station turns on automatically and 
starts to transmit FM signals (Auto Power 
On function). 
The POWER indicator of the base station 
lights up.
•  In some...

Page 46

8
Basic operations
Selecting a better reception channel
When the playback sound is noisy, you can 
choose one of the other two channels to 
transmit signals on the base station.
•  The white noise may come out when 
switching the channel. Take off the 
headphones when switching the channel.
1  Slide the CHANNEL 
selector on the back side of 
the base station to select another 
channel.
2  Press AUTO SCAN on the 
headphones to tune in to 
the new channel.
3 Repeat Steps 1 and 2 to select the 
best...

Page 47

9
Troubleshooting
Symptom Cause/Remedy
No sound comes out at all. •  Turns on the power of the headphones.
•  Start playback on the AV equipment connected to the base 
station.
•  Check the connection between the base station and the AV 
equipment.
•  Turns up the volume of the headphones or the connected AV 
equipment to an appropriate level.
•  Fully charge the headphones’ battery. 
No sound comes out from 
R-channel.•  Check the connection between the base station and the AV 
equipment.
•  Sound comes...

Page 48

10
Specifications
General Specifications
Modulation system:  Stereo frequency 
modulation system
Carrier frequency:  863.5 MHz (Channel 1)
864.0 MHz (Channel 2)
864.5 MHz (Channel 3)
Us abl e  are a
(distance to reach):  Max. 100 m
 (using JVC 
measurement systems, 
under controlled 
ambient conditions)
Frequency response:  25 Hz – 13,000 Hz
Distortion:  Less than 3% (at 1 kHz)
Transmitter (J22321-001)
Power requirements:  DC 12 V (with the 
exclusive AC adaptor)
Audio input terminals:  3.5 mm dia....

Page 49

HAW600RF_B.indb   11HAW600RF_B.indb   1106.6.26   6:08:42 PM06.6.26   6:08:42 PM 

Page 50

© 2006 Victor Company of Japan, Limited Printed in China
LNT0068-001A
HA-W600RF-B
FM CORDLESS HEADPHONES
HAW600RF_B.indb   2HAW600RF_B.indb   206.6.26   6:08:07 PM06.6.26   6:08:07 PM 
Start reading JVC Haw600rf Owners Manual

Related Manuals for JVC Haw600rf Owners Manual

All JVC manuals