JVC Gd F65l1 Instructions

							DEUTSCH
FRANÇAISLCD DISPLAY MONITOR
BEDIENUNGSANLEITUNG: LCD-DISPLAYMONITOR
MANUEL D’INSTRUCTIONS:  MONITEUR LCD
INSTRUCTIONS
GD-F65L1
ENGLISH
GD-F 65L1_co ve r.in dd   3GD-F65L1_cover.indd   34 /2 3/2 008   6 :2 6:4 6 P M4/23/2008   6:26:46 PM
 
						

							Dear Customer, 
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic 
compatibility and electrical safety. 
European representative of Victor Company of Japan, Limited is: 
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Sehr geehrter Kunde, sehr geehrte Kundin,
dieses Gerät stimmt mit den gültigen europäischen Richtlinien und Normen bezüglich elektromagnetischer 
Verträglichkeit und elektrischer Sicherheit überein. 
Die europäische Vertretung für die Victor Company of Japan, Limited ist: 
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Deutschland
Cher(e) client(e),
Cet appareil est conforme aux directives et normes européennes en vigueur concernant la compatibilité 
électromagnétique et à la sécurité électrique. 
Représentant européen de la société Victor Company of Japan, Limited : 
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Allemagne
Уважаем\bй кл\fент. 
Данное у\bтрой\bт\fо \bоот\fет\bт\fует дей\bт\fительным Е\fропе\дй\bким директи\fам и \bтандартам по 
электромагнитной \bо\fме\д\bтимо\bти и электриче\bкой безопа\bно\bти.
Пред\bта\fитель\bт\fо компании Victor Company of Japan, Limited \f Е\fропе:
JVC Technical Services  Europe GmbH
Postfach 10 05 04
61145 Friedberg
Г ермания DEUTSCH
FRANÇAIS
ENGLISH

[†(,XNRv

Victor Company of Japan, Limited  ,X û#·>
						

							
ENGLISH

1E
IMPORTANT INFORMATION
GD-F65L1
LCD DISPLAY MONITOR
ENGLISH
WARNING:  TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
RISK OF ELECTRIC 
SHOCK
DO NOT OPEN
CAUTION
CAUTION:   TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER.
 
NO USER-SERVICEABLE PARTS 
INSIDE. 
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the 
user to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may 
be of sufficient magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within a triangle is 
intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
product.
CAUTION: The AC outlet shall be installed near the equipment and shall be easily accessible. 
FOR CUSTOMERS IN U.K.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW :  Earth
BLUE : Neutral
BROWN :  Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the 
terminals in your plug proceed as follows:
• The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the 
letter E or by the safety earth  or coloured green or green-and-yellow.
• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 
N or coloured black.
• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 
L or coloured red.
Ensure that your equipment is connected correctly. If you are in any doubt consult a qualifi ed electrician.
“WARNING: THIS APPARATUS MUST BE EARTHED.”
 
						

							2E
CAUTION: Use the supplied power cord as it is.
IMPORTANT INFORMATION (Continued)
This product utilises fl uorescent tubes containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental consid\
erations. For disposal or recycling information, 
please contact your local authorities.
[European Union]
These symbols indicate that the electrical and electronic equipment and \
the battery with this symbol should 
not be disposed of as general household waste at its end-of-life. Instea\
d, the products should be handed 
over to the applicable collection points for the recycling of electrical\
 and electronic equipment as well as 
batteries for proper treatment, recovery and recycling in accordance wit\
h your national legislation and the 
Directive 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to conserve natural resources and will help to 
prevent potential negative effects on the environment and human health which could otherwise be cause\
d 
by inappropriate waste handling of these products.
For more information about collection points and recycling of these prod\
ucts, please contact your local 
municipal of fi ce, your household waste disposal service or the shop where you purchase\
d the product.
Penalties may be applicable for incorrect disposal of this waste, in acc\
ordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page www.jvc-europe.com to obtain information 
about the take-back of the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance with a\
pplicable national legislation or 
other rules in your country for the treatment of old electrical and elec\
tronic equipment and batteries.
Information for Users on Disposal of Old Equipment
Notice:
The sign Pb 
below the 
symbol for 
batteries 
indicates that 
this battery 
contains lead. Battery
Products
G
D-F 65L1_e_000_fr o nt.in dd   2GD-F65L1_e_000_front.indd   24 /2 3/2 008   6 :4 3:3 9 P M4/23/2008   6:43:39 PM
 
						

							
ENGLISH

3E

Thank you for your purchase of a JVC LCD product. To ensure safety and many years of trouble-free operation of your product, 
please read the Safety Precautions carefully before using this product.
SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly 
handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can 
result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, 
operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the 
following precautions carefully before using the product.
 1.  Read instructions — All operating instructions must be read and understood before the product is operated.
  2.   Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future 
reference.
  3.  Observe warnings — All warnings on the product and in the instructions must be observed closely.
  4.  Follow instructions — All operating instructions must be followed.
  5.   Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do 
not use liquid cleaners or aerosol cleaners.
  6.   Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result 
in accidents.
  7.   Water and moisture — Do not use the product near water.
  8.  Ventilation — The vents and other openings in the cabinet are designed for ventilation.
     Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life 
of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings. 
Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the 
manufacturer’s instructions are followed.
  9.   Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from 
resting on them.
 10.   The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with 
impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.
 11.  Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
 12.   Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in 
the product, and inserting an object can cause electric shock and/or short internal parts.
    For the same reason, do not spill water or liquid on the product.
 13.   Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other 
dangerous conditions. Request a qualified service person to perform servicing.
 14.   Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service 
person to perform repairs. 
a.  When the power cord or plug is damaged.
 
b.  When a liquid was spilled on the product or when objects have fallen into the product.
 
c.  When the product has been exposed to rain or water.
 
d.  When the product does not operate properly as described in the operating instructions.
 
   Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls  not described in the instructions can cause damage, which often requires extensive adjustment work by a qualifi ed 
technician.
    e.  When the product has been dropped or damaged.
 
    f.   When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product 
needs servicing.
DEAR JVC CUSTOMER
 
						

							
4E

 15.   Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of 
unauthorised parts can result in fire, electric shock and/or other danger.
 16.  Safety checks — Upon completion of service or repair work, request the service technician to 
    perform safety checks to ensure that the product is in proper operating condition.
 17.   Wall mounting — When mounting the product on a wall, be sure to install the product according to the method  recommended by the manufacturer.
 18.   Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating  products (including amplifiers).
19.   Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, 
dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below:
• Use the specified batteries only.
• Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the 
compartment.
• Do not mix old and new batteries.
• Do not mix batteries of different types. Voltage specifications of batteries of the same shape may vary.
• Replace an exhausted battery with a new one promptly.
• If you will not use the remote control for a long time, remove the batteries.
• If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your  eye well rather than rubbing and seek medical treatment immediately . Leaked battery fluid that gets into your eye or your 
clothing may cause a skin irritation or damage your eye.
 20.   Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury,  severe physical damage or other loss, including nuclear reaction control in nuclear facility , medical life support system, and 
missile launch control in a weapon system.
WARNING:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be 
required to take adequate counter measures.
SAFETY PRECAUTIONS (Continued)
 
						

							
ENGLISH

5E

-  The TFT colour LCD panel used in this monitor is made with the application of high precision technology. However, there 
may be minute points on the screen where pixels never light 
or are permanently lit. Also, if the screen is viewed from an 
acute angle there may be uneven colours or brightness. 
Please note that these are not malfunctions but common 
phenomena of LCDs and will not affect the performance of 
the monitor.
-  Do not display a still picture for a long period, as this could 
cause a residual image.
- Never rub or tap the monitor with hard objects.
-  Please understand that JVC bears no responsibility for errors  made during use by the customer or a third party, nor for any 
other malfunctions or damage to this product arising during 
use, except where indemnity liability is recognised under law.
-  This monitor and its accessories may be upgraded without 
advance notice.
-  Do not use the monitor where there is a lot of dust, where 
humidity is high, or where the monitor may come into contact 
with oil or steam, as this could lead to fire.
-  Ensure that the monitor does not come into contact with  water or other fluids. Ensure that no objects such as paper 
clips or pins enter the monitor as this could lead to fire or 
electric shock.
-  Do not place the monitor on top of unstable objects or in 
unsafe places. Do not allow the monitor to receive strong 
shocks or to strongly vibrate. Causing the monitor to fall or 
topple over may damage it.
-  Do not use the monitor near heating equipment or in places 
where there is likelihood of high temperature, as this may 
lead to generation of excessive heat and outbreak of fire.
The Power Cord
-  Do not damage the power cord nor place heavy objects on  it, stretch it or over bend it. Also, do not add extension cords. 
Damage to the cord may result in fire or electric shock.
- Use only the power cord supplied with the monitor.
-  Insert the power plug directly into the AC outlet.
 
Adding an extension cord may lead to fire as a result of 
overheating.
-  Do not remove or insert the power plug with wet hands. 
Doing so could result in electric shock.
- Unplug the power cord if it is not used for a long time.
-  Do not attempt to repair the power cord if it is broken 
or malfunctioning. Refer the servicing to the service 
representative.
Manual Scope
-  This product comes with RICOH Bitmap Fonts produced and  sold by RICOH COMPANY, LTD.
-  All other brand and product names are trademarks or 
registered trademarks of their respective holders.
-  Language of OSD menu used in this manual is English by 
way of example.
-  Illustrations in this manual may not exactly represent the  actual product or display.
Fluorescent Tubes
●  The fluorescent tubes in this product have a limited lifetime.
●  Because of the property of fluorescent tubes, the screen 
may flash during the initial period of use. If this happens, 
please turn off the main power switch of the monitor and 
turn on again to confirm operation.
TIPS AND SAFETY INSTRUCTIONS
 
						

							
6E
Contents
Introduction
IMPORTANT INFORMATION ............................................1
DEAR JVC CUSTOMER ...................................................
3
SAFETY PRECAUTIONS ..................................................
3
TIPS AND SAFETY INSTRUCTIONS ...............................
5
Supplied Accessories  ......................................................
7
Part Names .......................................................................7
Front view .....................................................................7
Rear view .....................................................................8
Remote control unit  ......................................................8
Connection and Installation
How to Install the Monitor  ...............................................9
Mounting precautions ...................................................9
Connecting Peripheral Equipment  ...............................10
Connection with a PC .................................................10
Connection with AV equipment  ..................................
10
Other terminals ...........................................................11
Connecting external speakers ....................................11
Connecting multiple monitors .....................................11
Connecting the Power Cord  .........................................12
Preparing the Remote Control Unit  ..............................12
Installing the batteries ................................................12
Remote control operation range .................................12
Removing the Temporary Stand ...................................
13
Basic Operation
Turning Power On/Off  ....................................................14
Turning on the main power  ........................................
14
Turning power on/off ..................................................
14
Disabling power on/off operations  ..............................14
Basic Operation .............................................................15
Menu Items .....................................................................17
Displaying the menu screen  .......................................17
Menu item details .......................................................18
Adjustments for PC screen display  ............................23
Initialisation (Reset)/ 
Functional Restriction Setting ..................................24
PC Operation
Controlling the Monitor with a PC  ................................25
PC connection ............................................................25
Communication conditions  .........................................25
Communication procedure .........................................25
RS-232C command table ...........................................29
Troubleshooting and Specifications
Troubleshooting .............................................................33
Specifications ................................................................
34
 
						

							
7E
ENGLISH
Supplied Accessories
If any component should be missing, please contact your dealer.
� Liquid Crystal Display: 1 
� Remote control unit: 1 
� Power cord: 1
� AA/R6 battery: 2
� INSTRUCTIONS: 1
� Stand hole protection cover: 2
 
*  For environmental protection!
  Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Part Names
Front view
1
2 5
43
6
1. LCD panel
2. Remote control sensor (See page 12.)
3. Power LED (See page 14.)
4. Power switch (See page 14.)
5. Input switch (See page 15.)
6. Temporary Stand 
(See page 13.)
TIPS
•  Use a pointed object such as a pen tip to press the  switches at the front of the monitor.
 
						

							
8E
E
Part Names
Rear view
1
68 9
1114
16
15
2 3
45
7
1012
13
17  1.  External speaker terminals  (See page 11.)
 2.  PC/AV audio output terminals  (See page 11.)
 3.  AV audio input terminals (See page 10.)
 4.  PC/AV output terminal (DVI-D)  (See page 11.)
 5.  PC1 input terminal (DVI-D) (See page 10.)
    AV1 input terminal (DVI-D)
 (See page 10.)
 6.  PC2 input terminal (Mini D-sub 15 pin) (See page 10.)
 7.  PC audio input terminal (See page 10.)
 8.  PC3 input terminals (BNC) (See page 10.)
 9.  AV3 input terminal (BNC) (See page 10.)
 
10.  AV2 input terminals (BNC) (See page 10.)
11.  RS-232C output terminal (D-sub 9 pin)
 (See page 25.)
 
12.  RS-232C input terminal (D-sub 9 pin) (See page 25.)
 13.  Main power switch
 (See page 14.)
 
14.  AC input terminal (See page 12.)
 
15.  Handles
 
16.  Vents
 17.  Hooks
Remote control unit
1
2
3
4
5
6
9
8
7
  1.  Signal transmitter
 2.  POWER button (See page 14.)
 3.  MUTE button (See page 15.)
 4.  VOL +/- buttons (See page 15.)
   
BRIGHT +/- buttons (See page 15.)
   
Cursor control ( /  /  / ) buttons
  5.  DISPLAY button (See page 15.)
 6.  MODE button (See page 15.)
 7.  INPUT button (See page 15.)
 8.  MENU button (See page 17.)
 9.  SIZE button (See page 15.)