JVC Gd 463d10e Instructions

							20
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Blue BackDisplays a blue screen and mutes the sound 
when the signal is weak or absent (On / Off)
z “Blue Back” does not function when the 3D mode is set to 
“SIDE BY SIDE 2”. (P. 12)
Control LockDisable the front control buttons on the 
monitor. (On / Off)
Power LampLights the power lamp (P. 7) while the monitor 
is on (On / Off)
 Features
Features
Power LampOn
Control LockOffBlue BackOn
GD-463D10U_EN.book  Page 20  Monday, June 8, 2009  4:20 PM
 
						

							21Customising your monitor
VIDEO Settingg “Setting video terminals” (P. 22)
HDMI-1 Audio 
SettingSet to “Digital” or “Auto” for HDMI devices, 
or “Analog” or “Auto” for DVI devices. (Not 
available for HDMI-2 and HDMI-3.)
HDMI Mode SettingFor setting the HDMI input
If there is no picture displayed on the 
screen, set “Mode” to “1” or “2”.
PC SettingFor setting the PC input
PC Position:
Adjust screen position
Phase:
Sets the focus of the screen.
Pixel:
Adjusts the horizontal feature of the screen.
 Set Up
Set Up
Video Setting
HDMI-1 Audio Setting
HDMI Mode Setting
PC Setting
Auto
z “PC Setting” is only available when 
“AV Select” is set to “PC”. (P. 13)
Note
HDMI-1
2
Mode
Mode
HDMI Mode Setting
HDMI-2
2
Mode
HDMI-3
1
Phase
Pixel
PC Setting
PC Position
 Adjust the position of the PC image
zReset position  g 
A adjust
B set
Aselect “PC Position”
Benter
PC Position
(blue)
GD-463D10U_EN.book  Page 21  Monday, June 8, 2009  4:20 PM
 
						

							22
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Edit names of connected devices (ID LIST)
Clear the name  g Select the blank space in the list
Switch between component and composite input            ( Pr/Pb/Y, V)
 Return to composite input  g Press “ ” (yellow) in  B again.
1Display the “VIDEO Setting” menu
2Select an input, and then proceed with setting
Setting video terminals
A select
B next
Display the menu 
bar Select “VIDEO Setting”Select “Set Up”
A
select
B next
VIDEO Setting
VIDEO-2
SAT VIDEO-1
DVD
select
A Show the name list BSelect a name from the list
(blue)
BsetA select
ASelect “VIDEO-1” BSet to component input
VIDEO Setting
VIDEO-2
SAT VIDEO-1
DVD
VIDEO Setting
VIDEO-2
SAT VIDEO-1
DVD
select
(yellow)
VPr/Pb/Y
GD-463D10U_EN.book  Page 22  Monday, June 8, 2009  4:20 PM
 
						

							23Troubleshooting
LCD
I can’t turn it on!zIs the power cord 
connected to the AC 
outlet correctly?
The remote 
control 
doesn’t work!
zAre the batteries 
flat?
z Are you more than 7 
meters (23 feet) away 
from the monitor?
z Is the “MODE (TV, STB, DVD, 
AUDIO)” set to “TV”?
ProblemActions
Basics
Remote control stops 
working z
Unplug monitor, several minutes later plug it 
in again.
Screen
Aspect ratio changes 
unintentionally z
Press “ ” to return to your settings. (P. 14)
PC screen alignment 
is off z
Adjust “PC Setting”. (P. 21)
Black or white dots 
appear on the screen z
LCD panels use fine dots (“pixels”) to display 
images.
While more than 99.99% of these pixels 
function properly, a very small number of 
pixels may not light, or may light all the time.
Please understand that this is not a 
malfunction.
Picture
Poor picture quality z
Change the “Picture Mode” setting. (P. 17)
z Unnatural color >>>
Adjust “Color” and “Backlight”. (P. 17)
Check your “Color System”. (P. 18)
z Noise >>> Set to the following functions.
Picture Mode: Standard (P. 17)
Digital VNR: On (P. 18)
DigiPure: Off (P. 18)
z Dull picture >>> Set to the following 
functions.
Picture Mode: Bright (P. 17)
Digital VNR: Off (P. 18)
DigiPure: On (P. 18)
GD-463D10U_EN.book  Page 23  Monday, June 8, 2009  4:20 PM
 
						

							24
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
ProblemActions
PictureStrange picture when 
using an external 
devicez
If the top of the image is distorted, check the 
video signal quality itself.
z If movement appears unnatural when 
receiving a signal from a DVD player etc., 
with 576p, change the output setting of the 
external device to 576i.
SoundPoor sound zAdjust “Bass” and “Treble”. (P. 19)
No sound from the 
audio component z
Audio signals received from HDMI-1, HDMI-2 
and HDMI-3 cannot be sent to the OUTPUT 
terminal.
Functions
Some functions do 
not work z
It is not a malfunction. Depending on the 
situation, some function items will be 
displayed in black color and will not work. 
(P. 17)
HDMI
Wrong screen size z
Read the user manual of the connected 
device and perform the following:
g Check if the output setting of the device is 
correct.
g Change the signal format of the device to 
other format.
No picture, no sound z
Use the cable marked with HDMI logo. 
Picture noise or no 
picture z
Set “HDMI Mode Setting” to “1” or “2”. (P. 21) 
ProblemActions
HDMINo sound z
Check if the device is compliant with HDMI.
z Set “HDMI-1 Audio Setting” to “Digital” or 
“Auto” for HDMI devices, or “Analog” or 
“Auto” for DVI devices.
(Not available for HDMI-2 and HDMI-3.) 
(P. 21)
Green and distorted 
screen z
Wait a little for the signal to stabilize when 
switching the signal format for an HDMI 
device.
3DImages do not appear 
as 3D or double 
vision z
Set to the 3D mode or ZOOM mode. (P. 12)
z If the images are not displayed properly even 
after switching the 3D/ZOOM mode, the 3D 
signal may not be supported.
GD-463D10U_EN.book  Page 24  Monday, June 8, 2009  4:20 PM
 
						

							25Technical information
Connect a DVI device to HDMI-1 using DVI-HDMI conversion cable. Connect 
analog sound output of the DVI device to L and R terminals in HDMI-1 (DVI 
ANALOG AUDIO).
z Set “HDMI-1 Audio Setting” to “Analog” or “Auto”  g (P. 21)
z HDMI-2 and HDMI-3 inputs do not support analog sound (HDMI-1 (DVI 
ANALOG AUDIO)).
When “Auto” is selected in Zoom, the  aspect ratio will turn to the ratio 
obtained from the information the monitor received.
z The aspect ratio will turn to the  ratio obtained from WSS (Wide Screen 
Identification Signal), video signal, or c ontrol signal of the external devices. 
Without receiving the aspect information, it will be the setting in “Zoom”. 
(P. 18) z
With the full HD LCD display and “Full Na tive”, you can enjoy full native HD 
resolution of 1920 x 1080. It exposes flaws in the video that were hidden 
when viewing on “Full”.
* The illustrations are emphasised to ma ke clear differences between “Full” 
and “Full Native”.
z Dark bar or noise may appear at the edges of the screen when viewing in 
“Full Native” for some videos. This is  resulted from the signal itself, not due 
to monitor malfunction.
PC signals that can be displayed
z If the signal doesn’t 
appear, check that the 
vertical frequency on the 
PC is set to “60Hz”.Resolution 640 x 480 
(VGA) 1024 x 768  
(XGA)
Vertical frequency (Hz) 60.0 60.0
Connect DVI devices
Auto in “Zoom”
What is “Full Native”?
Full Full Native
GD-463D10U_EN.book  Page 25  Monday, June 8, 2009  4:20 PM
 
						

							26
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Specifications
Main unit
ModelGD-463D10U / GD-463D10E
Power requirements AC 100 V - 240 V, 50 Hz / 60 Hz
Audio output (Rated power output) 10 W + 10 W
Speakers (4.5 cm x 13 cm) x 2
Power consumption
[standby]210 W
[0.5 W]
Screen size (visible area size 
measured diagonally)
116.8 cm
Headphone jack Stereo mini jack (3.5 mm in diameter) x 1
Operating conditions Temperature: 0°C – 40°C (32°F – 104°F)
Relative humidity: 20% – 80% (non-condensation)
(Slightly variable depending on ambient  conditions for installation.)
Dimensions (W x H x D)
[without stand]1071 mm (42 1/4) x 725 mm (28 5/8) x 275 mm (10 7/8)
[1071 mm (42 1/4) x 680 mm (26 7/8) x 74.5 mm (3)]
Weights
[without stand]26.9 kg (59.18 lbs)
[22.9 kg (50.38 lbs)]
Accessories (See “Check accessories”, P. 9)
Color systems PAL, SECAM, NTSC 3.58/4.43 MHz
Aspect ratio 16:9 (Wide format)
LCD panel type 46 inch wide, active matrix TFT
Effective screen size (W x H) 1018 mm (41) x 573 mm (23)
Number of pixels displayed (panel) 1920 (H) x 1080 (V)
Number of colors displayed 16.7 million
Contrast ratio (typ.) 2000:1
GD-463D10U_EN.book  Page 26  Monday, June 8, 2009  4:20 PM
 
						

							27Specifications
Terminals / Connectors
Terminal nameTerminal typeSignal type (IN)Signal type (OUT)
Input terminals
VIDEO-1 RCA connectors x 6Composite video,
Analog component
480/60i, 576/50i, 480/60p, 576/50p, 
720/60p, 720/50p, 1080/60i, 1080/50i
Audio L / R
VIDEO-2 RCA connectors x 3
S-VIDEO connector x 1 Composite video, S-Video, Audio L / R
HDMI-1
HDMI connector x 1 HDMI
480/60i, 576/50i, 480/60p, 576/50p, 
720/60p, 720/50p, 1080/60i, 1080/50i, 
1080/60p, 1080/50p, 1080/24p
HDMI-2
HDMI-3
HDMI-1 (DVI 
ANALOG AUDIO)
RCA connectors x 2 Audio L / R
PC INPUT D-SUB (15 pins) x 1 Analog PC signal
VGA/60, XGA/60
PC AUDIOStereo mini-jack x 1 (3.5 mm in 
diameter)
Audio L / R
Output terminals
OUTPUT RCA connectors x 3 Com
posite video, Audio L / R
HeadphoneStereo mini-jack x 1 (3.5 mm in 
diameter)
Headphone output
zWe may change the design and specifications without notice.
GD-463D10U_EN.book  Page 27  Monday, June 8, 2009  4:20 PM
 
						

							28
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
zThe adjustable angle of the monitor  screen from side to side is 20 degrees.
Dimensions Unit: mm (inch)
400 (15 3/4)
200 (7 7/8)
281 (11 1/8)
39.5 (1 5/8)
275 (10 7/8) 74.5 (3)1071 (42 1/4)
450 (17 3/4)
725 (28 5/8) 680 (26 7/8)



VESA mounting holes
(Size: 4-M6, 
depth: 15 mm)
Note
GD-463D10U_EN.book  Page 28  Monday, June 8, 2009  4:20 PM
 
						

							GD-463D10U_EN.book  Page 29  Monday, June 8, 2009  4:20 PM