JVC Gd 463d10e Instructions

							GD-463D10U
GD-463D10E
3D LCD MONITOR INSTRUCTIONS
LCT2574-001A-H
Contents
First things first!zSafety Precautions ............................  1
Getting startedzRemote control ..................................  6
z Names and functions of parts ...........  7
z Getting started...................................  9
Let’s try it out
Try the advanced featureszViewing 3D images .........................  11
z Watching videos / DVDs .................  13
z Useful functions ..............................  14
Just the way you like itzConfiguring your remote control ......  15
z Customising your monitor ...............  17
 Picture ............................................  17
 Features (sub menu) ......................  18
 Sound .............................................  19
 Features .........................................  20
 Set Up ............................................  21
When you have troublezTroubleshooting ..............................  23
z Technical information ......................  25
z Specifications ..................................  26
GD-463D10U_EN.book  Page 0  Monday, June 8, 2009  4:20 PM
 
						

							1Safety Precautions
Electrical energy can perform many useful functions. This unit has been 
engineered and manufactured to assure your personal safety. But 
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC SHOCK OR 
FIRE. In order not to defeat the safeguards incorporated into this product, 
observe the following basic rules for its installation, use, and service. Please 
read these “IMPORTANT SAFEGUARDS” carefully before use.
zAll the safety and operating instructions should be read before the product 
is operated.
z
The safety and operating instructions should be retained for future reference.zAll warnings on the product and in the operating instructions should be 
adhered to.
zAll operating instructions should be followed. WARNING:TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT 
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO 
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL 
BE PLACED ON THE APPARATUS.
IMPORTANT SAFEGUARDS
CAUTION:To reduce the risk of electric shock. Do 
not remove cover (or back). No user 
serviceable parts inside. Refer servicing 
to qualified service personnel. 
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
The lightning flash with arrowhead 
symbol, within an equilateral triangle is 
intended to alert the user to the presence 
of uninsulated “dangerous voltage” 
within the product’s enclosure that may 
be of sufficient magnitude to constitute a 
risk of electric shock to persons.
The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance.
CAUTION
POWER CONNECTIONThe power supply voltage rating of this product is AC 100 V – 240 V.
zThis product should be operated only with the type of power source 
indicated on the label. If you are not sure of the type of power supply of 
your home, consult your product dealer or local electric power 
company.
Note for United Kingdom power cord only
The plug of United Kingdom power cord has a built-in fuse. When 
replacing the fuse, be sure to use only a correctly rated approved type, 
re-fit the fuse cover. (Consult your dealer or 
qualified personnel.)
How to replace the fuse
Open the fuse compartment with the blade 
screwdriver, and replace the fuse.
Fuse
zBefore connecting other products such as VCR’s and personal 
computers, you should turn off the power of this product for protection 
against electric shock.
zDo not use attachments not recommended by the manufacturer as they 
may be hazardous.
zWhen replacement parts are required, be sure the service technician 
has used replacement parts specified by the manufacturer or 
equivalents. Unauthorized substitutions may result in fire, electric 
shock, or other hazards.
zUpon completion of any service or repairs to this product, ask the 
service technician to perform safety checks to determine that the 
product is in proper operating condition.
Under the following conditions,
1. Turn off the power.
2. Unplug this product from the wall outlet.
3. Refer service to qualified service personnel.
a) When the product emits smoke or unusual smell.
b) When the product exhibits a distinct change in performance—for 
example, no picture or no sound.
c) If liquid has been spilled, or objects have fallen on the product.
d) If the product has been exposed to rain or water.
e) If the product has been dropped or damaged in any way.
f) When the power supply cord or plug is damaged.
GD-463D10U_EN.book  Page 1  Monday, June 8, 2009  4:20 PM
 
						

							USE SETTING
TROUBLE?
PREPARE
IMPORTANT
2
zDo not install this product in the following places:
– in a damp or dusty room
– where the product is exposed to s oot or steam, such as near the 
cooking counter or a humidifier
– near heat sources
– where condensation easily occurs, such as near the window
z Do not place this product on an unstable cart, stand, or table. The 
product may fall, causing serious inju ry to a child or adult, and serious 
damage to the product.
The product should be mounted according to the manufacturer’s 
instructions, and should use a mount recommended by the 
manufacturer.
z Do not use this product near water.
z Be sure to install the product in the place where proper temperature and 
humidity are kept (See “Operat ing conditions” on page 26).
This product becomes hot during its use. Take enough care when 
handling the product.
Do not attempt to service this product yourself, as opening or removing 
covers may expose you to dangerous voltages and other hazards. Refer 
all service to qualified service personnel.
z Do not use the product for a long time if the sound is distorted.
z Never listen to headphones at high volume, it may damage your 
hearing.
zMake enough room for inserting or removing the power plug. Place the 
product as close to an AC outlet as  possible. The main power supply for 
the product is controlled by inse rting or removing the power plug.
z When the product is left unattended and unused for a long period of 
time, unplug it from the wall outle t and disconnect the cable system.
z Do not overload wall outlets, ex tension cords, or convenience 
receptacles on other equipment as this can result in a risk of fire or 
electric shock. U.S.A. only
FCC NOTICE (U.S.A. only)
CAUTION:
Changes or modifications not approv
ed by JVC could void the user’s 
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable prot ection against harmful interference 
in a residential installation. This equi pment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful in terference to radio communications. 
However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does caus e harmful interference to radio or 
television reception, which can be det ermined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or 
more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to  which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
z Slots and openings in the cabinet are  provided for ventilation. These 
ensure reliable operation of the product and protect it from overheating.
These openings must not be blocked or covered.
z Never push objects of any kind into this product through openings as 
they may touch dangerous voltage points or short-circuit the parts, 
which could result in a fire or electric shock.
z Never spill liquid of any kind on the product.
z Never place anything on the product.  (Placing liquids, naked flames, 
cloths, paper, etc. on the product may cause a fire.)
z Do not apply any strong shock to the LCD panel. (Do not hit any object 
against it or push it with a sharp-pointed tool.)
z Do not put heavy objects on the product.
z Do not step on or hang on the product.
GD-463D10U_EN.book  Page 2  Monday, June 8, 2009  4:20 PM
 
						

							3Safety Precautions
IMPORTANT SAFETY INSTRUCTIONS1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. 
A polarized plug has two blades with one wider than the other. A 
grounding type plug has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of 
the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at 
plugs, convenience receptacles, and the point where they exit from the 
apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table 
specified by the manufacturer, or sold with the 
apparatus. When a cart is used, use caution when 
moving the cart/ apparatus combination to avoid injury 
from tip-over.
13) Unplug this apparatus during lightning storms or when 
unused for long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required 
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been exposed to rain or 
moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects 
filled with liquids, such as vases, shall be placed on the apparatus.
16) Batteries shall not be exposed to excessive heat such as sunshine, fire or 
the like.
17) When discarding batteries, environmental problems must be considered 
and the local rules or laws governing the disposal of these batteries must 
be followed strictly.
18) Avoid improper installation and never position the unit where good 
ventilation is impossible. When installing this monitor, distance 
recommendations must be maintained between the set and the wall, as 
well as inside a tightly enclosed area or piece of furniture. Keep to the 
minimum distance guidelines shown for safe operation.
19) When this monitor is connected to the wall outlet, it is always on standby 
even when all the LED lamps are not lit. To shut down the monitor, unplug 
the monitor from the wall outlet. U.S.A. only
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal of 
these materials may be regulated in your community due to environmental 
considerations. For disposal or recycling information, please contact your 
local authorities or for USA, the Electronic Industries Alliance:                  
http://www.eiae.org
200 (7 7/8)
150 (6) 50 (2)150 (6) Unit: mm (inch)50 (2)
GD-463D10U_EN.book  Page 3  Monday, June 8, 2009  4:20 PM
 
						

							USE SETTING
TROUBLE?
PREPARE
IMPORTANT
4
European Union only
Dear Customer,
This apparatus is in conformance with the valid European directives and 
standards regarding electromagnetic co mpatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Information for Users on Disposal of Old Equipment 
and Batteries
Notice: Products
Battery
The sign Pb below
the symbol for 
batteries indicates 
that this battery
contains lead.
[European Union]
These symbols indicate that the electrical and electronic equipment 
and the battery with this symbol should not be disposed of as 
general household waste at its end-of-life. Instead, the products 
should be handed over to the applicable collection points for the 
recycling of electrical and electronic equipment as well as batteries 
for proper treatment, recovery and recycling in accordance with your 
national legislation and the Directive 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to conserve 
natural resources and will help to prevent potential negative effects 
on the environment and human health which could otherwise be 
caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these 
products, please contact your local municipal office, your household 
waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in 
accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page 
http://www.jvc-eu/ to obtain information about the take-back of 
the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance 
with applicable national legislation or other rules in your country for \
the treatment of old electrical and electronic equipment and batteries.
GD-463D10U_EN.book  Page 4  Monday, June 8, 2009  4:20 PM
 
						

							5Safety Precautions
Unplug this product from the wall outlet before cleaning.
Screen
To avoid irreparable change in appearance of the screen such as uneven 
color, discoloration, scratches, be careful about the following:
zDo not paste or stick anything using any glues or adhesive tapes.
zDo not write anything on the screen.
zDo not strike the screen with a hard object.
zAvoid condensation on the screen.
zDo not wipe the screen with any liquid such as water. In addition, wiping 
the screen with water-diluted neutral detergent or solvent such as alcohol, 
thinner, or bezine may affect the anti-reflection treatment of the screen.
zDo not wipe the screen forcefully.
If the screen gets stained, wipe it with a soft dry cloth.
Cabinet
To avoid the deterioration or damages of the cabinet such as its paints 
peeling away, be careful about the following:
zDo not wipe the cabinet using solvent such as alcohol, thinner, or benzine.
zDo not expose the cabinet to any volatile substance such as insecticides.
zDo not allow any rubber or plastic in contact for a long time.
zDo not wipe the cabinet forcefully.
Wipe stains off the cabinet with a soft cloth. If the cabinet gets heavily 
stained, wipe it with a soft cloth soaked in water-diluted neutral detergent and 
wrung well, then wipe with a soft dry cloth.
See “Handling the glossy finish of the monitor” (P. 8) on how to handle the 
glossy finish.
Ventilation openings
Use a vacuum cleaner to get rid of the dust around the intakes (all the 
openings). If a vacuum cleaner is not available, use a cloth and wipe it off. 
Leaving the dust around the intakes may prevent proper temperature control 
and cause damage to the product.
Glasses
If the glasses get stained, wipe it with a soft dry cloth.
Maintenance
GD-463D10U_EN.book  Page 5  Monday, June 8, 2009  4:20 PM
 
						

							6
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Remote control
466)$%/
LCD
STBAUDIO
MODE
2%452.
#LEAR3$
CH
CH
VOL
VOL
$)30,!9TOP MENU
ZOOM
MuteTurn on / off (standby) the monitor
Enter number
Color buttons
Display on-screen menu (P. 17)
Select and confirm settings in menus
Change external input
To the previous screen
Select a 3D mode (P. 12)
Select a picture mode (P. 14)
Turn on “Clear SD” (P. 18)
Switch between “TV / STB / DVD / AUDIO” (P. 15)
Switch between VIDEO devices
Volume control / Turn off muting
Display current input information
Change the aspect ratio (P. 14)Turn on “Sound Effect” (P. 14)
zFor buttons that can be used to operate other devices, refer to 
“Configuring your remote control” (P. 15).
z Buttons that are not explained in this manual does not function 
with this monitor.
Notez If the remote control doesn’t 
work, confirm that the mode is 
set to “TV”.
GD-463D10U_EN.book  Page 6  Monday, June 8, 2009  4:20 PM
 
						

							7Names and functions of parts
Peel off the protection films pasted on the glossy finish of the monitor after 
the monitor has been placed properly. (P. 8)
Touch sensor panel operation
 Touch on the function name to operate the function
 Operate the menus
 Use as “MENU” button or “OK” button.
 Use as “ ” and “ ” buttons.
 Use as “ ” and “ ” buttons.
z For details on menu operations, refe r to “Customising your monitor” 
(P. 17).
Change the direction of monitor
Power lamp
ON: Lit (Blue)
OFF: Unlit
z When “Power Lamp” is set to “Off”, 
the power lamp will not light up.
g “Power Lamp” (P. 20)Remote control 
sensor
Note
Volume
Switch to an external input. (P. 13)
z Touching   and   simultaneously switches the 
monitor to 3D mode.Change external 
input.
Menu operation. Turn on / off (standby) 
the monitor.
VOLV
O Lz You will hear a beep if you have touched 
the button correctly.
CHCH
VOLVO L
GD-463D10U_EN.book  Page 7  Monday, June 8, 2009  4:20 PM
 
						

							8
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
To prevent scratches on the panel, lay a piece of soft cloth on an even 
platform and place the monitor onto it.z
When the stand is not used:
Seal up the two holes at the bottom of the TV using 
the plates provided. Peel off the protection films on 
the plates. Then peel the plates from the paper and 
stick them on the holes.
Be careful when handling the glossy finish of the monitor
The glossy finish of t he monitor scratches easily.
z Protection films have been pasted onto the  glossy finish of the monitor to 
prevent scratches. Peel off the film s after the monitor has been placed 
properly.
z If the glossy finish gets dirty, clear  the dust off the glossy finish first. Then 
wipe softly with the cleaning cloth pr ovided. If you do not clear the dust 
first, or you wipe the glossy finish t oo hard, or a cleaning cloth other than 
the one provided is used, the glossy finish may be scratched.
Attach the stand to the monitor
1
2
Handling the glossy finish of the monitor
Note
Glossy finish
GD-463D10U_EN.book  Page 8  Monday, June 8, 2009  4:20 PM
 
						

							9Getting started
Please read P. 10 of this manual to set up your monitor.
zStand, stand cover, screws and plates are also included. For details, refer 
to page 8. Follow the instructions on page 8 to attach the stand provided to the monitor.
z
Place the monitor on a flat and stable location.
 Power requirements
z Connect the power cord only to a 100 - 240 V, 50/60 Hz AC outlet.
 Installation requirements
z To prevent the monitor from falling, thread the belt through the hole on the 
back of the stand and secure it to the rack, etc.
Use two “AAA/R03” dry cell batteries. Insert the batteries from the  - end, 
making sure the  + and  - polarities are correct.
Check accessories
Remote control“AAA/R03” Batteries
(For confirming the 
monitor works)
Cleaning cloth
(For details on using the 
cleaning cloth, see P. 8.)
WARNING:
Batteries shall not be exposed to 
excessive heat such as direct 
sunshine, fire or the like.
Circular polarizing glasses 
(x2)
(For viewing 3D images)
Install your monitor
Insert the batteries
Hole
Belt and screw (not provided)
GD-463D10U_EN.book  Page 9  Monday, June 8, 2009  4:20 PM