JVC Gd 463d10e Instructions

							10
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Make sure all the devices and the monitor are turned off.
You can connect many different devices to the rear panel of the monitor.
Please read the user manuals  of each device before setting up.
(Connecting cables are not suppl ied with this monitor.)
Connecting your external devices
JVC
PrPbY
R
LRLV
RLV
RLV
S-VIDEOVIDEO-2
VIDEO-1
PCAUDIO
PC IN(D-SUB)
OUTPUT
HDMI-1
JVC
Component input
DVD Player
HDMI-1HDMI-2HDMI-3
DVD player
(HDMI compatible) Not available.
(For service adjustments)
Digital Satellite 
broadcast tuner HD Video 
camera
DVD player
To VIDEO-2 Game 
consoles Video 
camera
PC input line in
PC Composite input
Game 
consoles Video 
camera
VCR g
: signal direction
Headphones
A B
C
HDMITM ConnectorHDMI  Connector
z To reduce noise, use a VGA cable with core filters.
Note
z Use component signal
g “VIDEO Setting” (P. 21)
z If both composite and S-VIDEO cables 
are connected, S-VIDEO input takes 
priority over composite inputs.
z “HDMI-1 Audio Setting”   g (P. 21)
z HDMI-2 and HDMI-3 inputs do not support 
analog sound.
OUTPUTVideo and sound signals of a monitor channel 
you are viewing output from these terminals
DVI devices
g“Connect DVI devices” 
(P. 25)
VIDEO-1Watching videos
Output jInputh
• Composite signal /
Component signal 
(P. 27)
• Sound L / R
VIDEO-2Watching videos
Output jInputh
• Composite signal / 
S-VIDEO
• Sound L / R
HDMI-1
HDMI-2
HDMI-3Connecting HDMI 
devices
Output jInputh
• HDMI signal (P. 27)
Output j
• Composite signal
• Sound L / R
HDMI, the HDMI Logo and High-Definition Multimedia 
Interface are trademarks or registered trademarks of 
HDMI Licensing LLC.
GD-463D10U_EN.book  Page 10  Monday, June 8, 2009  4:20 PM
 
						

							11Viewing 3D images
This product is a 3D LCD Monitor which adopts the Xpol®*1 circular polarizing 
method. You can enjoy 3D stereosc opic content by using the supplied 
circular polarizing glasses.
*1: Xpol® is a registered trademark of Arisawa Manufacturing Co., Ltd.
By having a filter of different polarizat ion on every alternate scan line on the 
monitor, and projecting the left eye imag e (left circular polarization) and the 
right eye image (right circular polarizat ion) through the filters, users can 
enjoy a realistic three dimensional view  by viewing the left and right images 
simultaneously through the circular polarizing glasses.
As the left and right images are alwa ys displayed together on the screen, 
users can view flicker-free 3D images.
When viewing in 3D
z To view in 3D, input the 3D images and press the “3D” button to change to 
a suitable mode before putting on the circ ular polarizing glasses to view 
the 3D images.
z Every individual will have a different  experience when viewing 3D images. 
Viewing at a close distance may c ause disorders and discomfort; it is 
recommended to view at a distance of about 2 m (6 feet) from the front of 
the screen.
z The 3D effects may differ when viewing the screen from different angles.
z Stop using the product and rest immedi ately if you experience eyestrain, 
dizziness, vomiting, headaches or any  other discomforts. Take periodic 
breaks and rest even if you do  not experience any discomfort.
z If the symptoms persist even after  resting, please consult a doctor.
z For users with past experiences of PSS  (Photo Sensitive Seizure) or users 
with heart problems, please consult a  doctor before using this monitor.
z For infants still in the visual dev elopment stage, please consult a doctor 
and have an adult guardian accompany the child.
Cautions on using the circular polarizing glasses
z Use the circular polarizing glas ses only when viewing 3D images.
z Use only the circular pola rizing glasses provided.
z For users who wear spectacles, cover  the spectacles with the circular 
polarizing glasses.
z Do not use the circular pola rizing glasses as sunglasses.
z Please consult a doctor if allergies  appear on the areas that come into 
contact with the circul ar polarizing glasses.
z For purchase of additional circular po larizing glasses, please contact the 
dealer where you purchased your monitor.
Basic 3D principle
Note
GD-463D10U_EN.book  Page 11  Monday, June 8, 2009  4:20 PM
 
						

							12
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
This monitor supports LINE BY LINE and SIDE BY SIDE 3D signals. To view 
3D images, input a compatible 3D signal to enjoy the 3D effects.
You can activate the 3D mode using the following method.
Touch   and   on the touch sensor panel (P. 7) 
simultaneously.
OR
Press the “3D” button on remote control. (P. 6) z2D to 3D image conversion fu nction is not available.
z When using SIDE BY SIDE to view 3D  images, screen displays such as 
menu screen will appear either on the left or right side of the screen. If you 
cannot see the screen clearly, remove  your circular polarizing glasses.
z Set the 3D/ZOOM mode to the following setting when viewing in 3D.
z If double vision occurs when viewing in 3D using the component inputs, 
set the following items.
“Sharpness”: Minimum (P. 17)
“Clear SD”, “Digital VNR”, “DigiPure”, “MPEG Noise Reduction”: “Off” 
(P. 18)
To view 3D images
LINE BY LINE For line-by-line 3D input and normal 
2D input.
Input signal Monitor screen
SIDE BY SIDE 1 For horizontally compressed side-
by-side 3D input.
Left screen Right screen Monitor screen Input signal
SIDE BY SIDE 1SIDE BY SIDE 2LINE BY LINE
SIDE BY SIDE 2 For non-compressed side-by-side 
3D input 
Left screen Right screen Monitor screen Input signal
Input Format 3D Mode Zoom Mode (P. 14)
HDMI 1080p LINE BY LINE, 
SIDE BY SIDE 1/2
Full Native
HDMI, 
Component 1080i SIDE BY SIDE 1/2 Full Native
Note
GD-463D10U_EN.book  Page 12  Monday, June 8, 2009  4:20 PM
 
						

							13Watching videos / DVDs
1Select the video source
2Operate the connected device and play a video
To operate using the monitor’s touch sensor panel
 1Touch 
 2 Touch   and   to select
 3Touch 
AV Select
VIDEO-1
VIDEO-2
HDMI1
HDMI2
HDMI3
PC
1
2
3
4
5
6
E.g. For VIDEO-1
B
watch
Aselect
T V/VIDEO
AV  S e l e c t
LCDLCD
T V/VIDEO
GD-463D10U_EN.book  Page 13  Monday, June 8, 2009  4:20 PM
 
						

							14
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Useful functions
 Zoom
Change the aspect ratio
z Depending on the signal formats, some zoom modes will be 
displayed in black and will not be selectable.
z If an image is displayed in an as pect ratio that differs from its 
original aspect ratio, the image wi ll be distorted or portions of 
the image will be cut off.
 Sound Effect
Enjoy the sound setting that you like
Cinema Surround (P. 19)
Enjoy ambient sound.
z “Cinema Surround” does not work with headphones.
MaxxBass (P. 19)Compensates low frequencies  to widen the frequency band.
z “MaxxBass” does not work with headphones.
 Picture Mode (P. 17)
You can select a preset picture setting according to the 
brightness of your room or when playing video games.
1
2
Select the aspect ratio
3
zWhen “Slim” is selected, a 4:3 image stretched out to 16:9 will 
revert back to its original aspect ratio with black bands.
z When “Panoramic Zoom” is select ed, a 4:3 image with black 
bands will be stretched out to 16:9.
z “Full Native”  g “What is “Full Native”?” (P. 25)
z Using “Auto”  g “Auto in “Zoom”” (P. 25)
Zoom
Auto
Regular
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
Full Native
Slim
Panoramic ZoomPanoramicA select
Bset
16:9 Zoom
Move the picture with  S or  T while this bar is displayed
Note
Off
MaxxBass
Off
Cinema Surround
Sound Effect
LCD
CH
CH
GD-463D10U_EN.book  Page 14  Monday, June 8, 2009  4:20 PM
 
						

							15Configuring your remote control
You can configure your monitor’s remote control to operate your 
other devices.
Configure your remote control.
zIf none of the code works, refer to “Using the search code 
function” (P. 16).
1Turn on the device manually.
2Switch the remote contro l mode to a mode that 
matches your device. Refer to the table below to 
select an appropriate mode.
z The indicator lights for 3 seconds each time the remote 
control is operated.
3Find the remote control code for your JVC device 
from the table below.
MODE Applicable devices Remote control codes
TV This monitor only
STB Not in use
DVD DVD 0503, 0539, 0623, 1241, 1550, 
1602, 1701, 1860, 1863, 1940
DVD/DVD-R 1164, 1275, 1597
Home Theater in Box 0623, 1701, 1860, 1863, 1940
AUDIO Receiver/Home 
Theater in Box 0074,1374,1676, 2000, 2001
TVSTB
AUDIODVD
4Set the remote control code.
5Point the remote control at your device, press   
and confirm that your device is turned off. If your 
device does not respond, try entering another 
available code.
Press and hold Enter four digit 
number Release the button
Note
LCD
GD-463D10U_EN.book  Page 15  Monday, June 8, 2009  4:20 PM
 
						

							16
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Change the remote control mode
 Turn on/off the device
 Navigate the menus
 Playback / Record, etc.
 Mute  g Press “ ”
 Vo l u m e   g Press “ ”
 Select a surround mode  g Press “ ”
z Depending on your device, some functions may not 
be operable with this remote control.Using the search code function
This function searches through the c odes one by one, beginning from the 
first code in the list.
1Turn on the device manually.
2Switch the remote control mode to a mode that matches 
your device.
Press   to select the mode.
3Activate the search code function.
Hold down   and   until the mode indicator blinks.
4Point the remote control at your device and press  . If 
there is no response, try the next code by pressing   and 
press   again. Repeat the  process until your device 
turns off.
5Press   to register the code.
The code is now set. Confirm that the mode indicator goes 
out.
 If your monitor’s remote control still does not work even after using the 
search code function, use your dev ice’s own remote control. Some 
models of JVC devices cannot be  operated with this remote control.
Button functions
DISPLAYDisplay top 
menuOK
Select
Display menu
Back to 
previous menu
MODE
Play
Forward
RewindSelect a 
chapter
StopPauseRecord
VOLVOL
LCD
MODE
VOL
VOL
DISPLAYTOP MENU
GD-463D10U_EN.book  Page 16  Monday, June 8, 2009  4:20 PM
 
						

							17Customising your monitor
You can select a preset picture setting according to the 
brightness of your room or when playing video games.
You can make further adjustments to the selected preset 
“Picture Mode” to your liking.
 To return to the default adjustments  g  (blue)
1Display the menu bar
2Display the desired menu
3Change or adjust the setting
z The menu disappears 
after one minute of 
inactivity.
 To the previous 
screen
g
4Close the menu
Pictureselect 
Picture
Picture ModeStandard
White BalanceCoolFeatures Backlight
ContrastBrightnessSharpnessTintColor
select 
 To enter an item’s menu change / adjust
select 
(E.g. Features)Features
Clear SD
DigiPure
Pull Down
Color Management
Picture Management
Smart Picture
Dynamic Backlight
MPEG Noise Reduction
Color System
Zoom
Off
Digital VNROffOff
Auto
On
On
On
On
On
Picture Mode
Bright : in a fairly bright room
Soft : in a dark room
Standard : in a room with standard brightness
Game Mode : when playing video games
Backlight Backlight brightness (Darker  l Brighter)
Contrast Contrast (Lower  l Higher)
Brightness Brightness (Darker  l Brighter)
Sharpness Sharpness (Softer  l Sharper)
Color Color (Lighter l Deeper)
Tint Tint (Reddish l Greenish) (NTSC only)
White Balance Color temperature (Warm / Mid / Cool)
Featuresg “Features (sub menu)” (P. 18)
 Picture
Picture
Picture ModeStandard
White BalanceCoolFeatures Backlight
ContrastBrightnessSharpnessTintColor
z Depending on the 
situation (video 
signal formats, 
external inputs, 
etc.), some items 
will be displayed in 
black color and will 
not work. You will 
not be able to 
change their 
setting as well.Note
LCD
z“Sharpness” is not 
available during HDMI 
input.
Note
GD-463D10U_EN.book  Page 17  Monday, June 8, 2009  4:20 PM
 
						

							18
USE SETTING
TROUBLE?
PREPARE
IMPORTANT
Clear SDFor clearer picture (Off / Mode-1 / Mode-2)
z When “Mode-1” or “Mode-2” is selected, “Digital VNR”, “DigiPure”, 
“MPEG Noise Reduction” and “Pictu re Management” settings are not 
available.
Digital VNRReduce noise
On : Maintain constant effect 
level Off :
Function is turned off
DigiPureFor natural-looking outlines
On : When the picture loses 
sharpness Off :
Function is turned off
Pull DownFor smooth cinema film
On : Function is always on Off :Function is turned off
Auto : Turn on / off the function automatically
Color ManagementMaintain a natural color balance (On / Off)
 Features (sub menu)
Clear SD
Digital VNR
DigiPure
Pull Down
Color Management
Picture Management
Smart Picture
Dynamic Backlight
MPEG Noise Reduction
Color System
ZoomOff
OffOff
Auto
On
On
On
On
On
Features
Picture 
ManagementMake it easier to view bright / dark pictures 
(On / Off)
Smart PictureMake it easier to view white areas (On / Off)
Dynamic BacklightReduce the brightness of the backlight when 
the screen is dark (On / Off)
MPEG Noise  ReductionReduce MPEG video noise (On / Off)
Color SystemWhen there is no color, change the color 
system (PAL / SECAM / NTSC3.58 / 
NTSC4.43 / Auto)
z Select “Auto” when watching videos etc.
ZoomSelect a default aspect ratio for Auto in 
“Zoom” (P. 14)
Panoramic Regular 14:9 Zoom
PA L
Color System
Zoom
Auto
Regular
Panoramic
14:9 Zoom
16:9 Zoom
16:9 Zoom Subtitle
Full
Full Native
Slim
Panoramic ZoomPanoramic
16 : 94 : 314 : 9
z “Clear SD”, “Digital VNR”, “DigiPure” 
and “MPEG Noise Reduction” are not 
available during HDMI input.
z “Smart Picture” is not available when 
“Picture Mode” is set to “Bright” (P. 17).
z “Clear SD”, “Digital VNR”, “DigiPure”, 
“Pull Down”, “MPEG Noise Reduction” 
and “Color System” are not available 
when “AV Select” is set to “PC”. (P. 13)
Note
GD-463D10U_EN.book  Page 18  Monday, June 8, 2009  4:20 PM
 
						

							19Customising your monitor
BassLow tones (Weaker l Stronger)
TrebleHigh tones (Weaker  l Stronger)
BalanceSpeaker balance (Left stronger  l Right 
stronger)
Cinema SurroundAmbient sound (High / Low / Mono / Off)
z “Cinema Surround” does not work with headphones.
Auto Volume 
ControlTurns down the volume automatically when 
an excessive sound signal is input. (On / Off)
z “Auto Volume Control” does not work with headphones.
MaxxBassCompensates low frequencies to widen the 
frequency band (Low / High / Off)
z “MaxxBass” does not work with headphones.
MaxxBass is a registered trademark of Waves Audio Ltd. in the USA, 
Japan and other countries.
 Sound
Sound
Off
Off Off
Bass
Treble
Balance
Cinema Surround
Auto Volume Control
MaxxBass
GD-463D10U_EN.book  Page 19  Monday, June 8, 2009  4:20 PM