JVC Av 2104ce Instructions

5
TV buttons and functions
The following illustrations are for AV-1404FE and AV-1403AE only, which are used for
explanation purpose. Your TV may not look exactly like the illustrated.
Front of the TV
AV-1404FE
AV-1403AE
Rear of the TV
AV-1404FE AV-1403AE
OK MENU
CHANNELVOLUME
VIDEO    AUDIOIN (VIDEO-2)
97421865
No. Button/terminal Description1I(main power) Press to turn on or turn off the TV’s main power.
2Power lamp Indicate the TV is being turned on or off.
No colour : TV’s main power is being turned...

6
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
1Connecting the aerial
To install rod aerial
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VIDEO
AUDIO
VIDEO -1
INPUTOUTPUT
If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV
with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of
the TV with the video cable and audio cables. For details, see the...

7
Setting up your TV (continued)
5Making the initial settings
Set up your TV by pressing any buttons except POWER button, then operate the TV menu by
following the steps as below:

  
	


	
7

	 	
• Press the red button to cancel the SETUP
TOUR RESTART function.
If you want to make initial settings again
when the next time you turn on the TV,
press the MENU/OK button to activate the
SETUP TOUR RESTART function.
≠
EDIT
PR   CH/CC
 7   CH 09 
 8   CH 11
 9 CH 13 
 10  
 11...

8
Basic setting for picture
COLOUR SYSTEM
You can select the appropriate colour system
when the picture is not clear or no colour
appears.
Press the COLOUR SYSTEM button to select a
setting.
In TV mode:
AUTOPALSECAM
In VIDEO mode:
AUTOPALSECAM
NTSC3.58 NTSC4.43
To operate this function with a menu:
❇
MENUPICTUREPICTURE FEATURES
COLOUR SYSTEM
For the colour system in each country or region,
see the table below:
Area Country or Region SystemBahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
PA...

9
Advance setting for picture
BLUE BACK
You can set the TV to automatically change to a
blue screen and mute the sound if the signal is
weak or absent, or when there is no input from
an antenna.
Select the BLUE BACK in the INSTALL menu,
then choose ON or OFF.
Original features for picture
TELETEXT
You can watch the Teletext broadcast channel
with TEXT function.
1 Press the TEXT button to select the
desired mode as follows:
TV mode  TEXT mode
MIX mode  
2Press the CHANNEL -/+ buttons, number
buttons or...

10
Basic setting for sound
Advanced setting for sound
SOUND SYSTEM
You can select an appropriate sound system when
abnormal sound  occurs even when the picture
appears normally.
Press the SOUND SYSTEM button to select a
setting.
B/GID/K
The function is not available in video mode.
For the sound system in each country or region,
see the table below:
Area Country or Region SystemBahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc. B/G
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India,...

11
Favorite channel and video setting
To register the favorite channel
You can register and recall 4 favorite channels by
using the colour buttons (red, green, yellow,
blue).
1In TV mode, select a TV channel (PR01- 99)
you desired to register.
2Press and hold a colour button for 3
seconds or more.
“FAVORITE CHANNEL 7 PROGRAMMED!”
appears on the screen and current channel
is registered.
3To register other favorite channels, repeat
Step 1 to 2.
To recall the favorite channel, press the colour
button.
When...

12
Customized setting
VNR
You can reduce the noise.
Select the VNR in the PICTURE FEATURES menu
under PICTURE menu, then choose a setting of
VNR function.
❇
VNR
MENUPICTUREPICTURE FEATURES
OFF VNR is turned off.AUTO Effect of VNR is automatically controlled.MIN Effect of VNR becomes minimum level.MAX Effect of VNR becomes maximum level.If you select MAX, the picture becomes softer
even if the original picture is sharp.
LANGUAGE
You can choose your desired on screen display
language.
Select the LANGUAGE...

13
TV channel presetting
To register the TV channels auto-
matically
You can register the TV channels into the TV’s
channel list automatically.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2Choose AUTO PROGRAM, then press the
MENU/OK button.
AUTO PROGRAM function starts, and the
channels received are registered in the
channel list (PR list) automatically.
3 “SETUP TOUR RESTART?” appears.
To start thePress the MENU/OK button.
SETUP TOUR Then proceed to step 5 of
“Setting up your TV” on page
7.
To skip the...

14
TV channel presetting
To add in the new channel
(INSERT in the EDIT menu)
You can add in the new channel in the TV
channel list as you like.
You need to find the “CH/CC” number for the TV
channel. Find the “CH/CC” number correspond-
ing to the channel number of the TV channel
from the attached sheet “CH/CC number list” on
this page.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
3Choose the PR number for which you will
register a new...