JVC Av 2104ce Instructions

GGT0035-001A-H
COLOUR TELEVISION
MODEL WITH THE TELETEXT FUNCTION
AV-21F24
AV-21L24
MODEL WITHOUT THE TELETEXT
FUNCTION
AV-21C14
AV-21D14
AV-21E14
AV-21F14
AV-21L14
AV-21T14
AV-20N14
AV-14A14
AV-14F14
Contents
Knowing your TV’s features..........................
2
Remote control buttons and basic functions.
3
TV buttons and functions..............................
5
Setting up your TV........................................
6
Basic setting for picture.................................
8
Advanced setting...

2
Safety Instructions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING
RULES REGARDING THE USE OF THIS TV.
1Operate only from the power source indicated on the rear of the TV.
2Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the
mains plug. Do not pull on the power cord.
3Never block or cover the cabinet ventilation
openings. Never install the TV where good
ventilation is...

3
3
2
86
7
9
5
1
4
0
1
9
2
3
7
5
0
4
6
8
Remote control buttons and basic functions
RM-C1260WITH THE TELETEXT
FUNCTION
(AV-21F24/AV-21L24)
RM-C1261WITHOUT THE
TELETEXT FUNCTION
(AV-21C14/AV-21D14/
AV-21E14/AV-21F14/
AV21L14/AV-21T14/
AV-20N14/AV-14A14/
AV-14F14)
No. Press To1POWER Turn on or off the TV from standby mode.2MENU/OK Display menu and confirm selected function.35/∞/2/3Select and adjust menu function.4CHANNEL MSelect the desired channel number.5VOLUME MAdjust the volume level.6TV/VIDEO Select...

4
Remote control buttons and basic functions
How to operate menus and menu locations
TO Operation Note
Display the MENU. Press the MENU/OK button 2.To exit the MENU, press the
DISPLAY button 8 or choose EXIT
menu.
Display the top menu. Press 5/∞buttons 3 to choose a menu title. Press ∞ button 3 to display the
Then press MENU/OK button 2.next page for more functions.
Display the 2nd menu. Press 5/∞buttons 3 to choose a menu title.
Then press MENU/OK button 2.
Display the 3rd menu. Press 5/∞buttons 3 to...

5
TV buttons and functions
The following illustrations are for AV-21F14 and AV-21T14 only, which are used for
explanation purpose. Your TV may not look exactly like the illustrated.
Front of the TV
AV-21F14
AV-21T14
Rear of the TV
OK MENUVIDEO    AUDIOIN (VIDEO-2)
97421865
VIDEO -1
INPUT
VIDEO
AUDIO
OUTPUT
0 - =
No. Button/terminal Description1I(main power) Press to turn on or turn off the TV’s main power.
2Power lamp Indicate the TV is being turned on or off.
No colour : TV’s main power is being turned...

6
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
1Connecting the aerial
To install rod aerial
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VIDEO -1
INPUT
VIDEO
AUDIO
OUTPUT
If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV
with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of
the TV with the video cable and audio cables. For details, see the...

7
Setting up your TV (continued)
5Making the initial settings
Set up your TV by pressing any buttons except POWER button, then operate the TV menu by
following the steps as below:

  
	


	
7

	 	
• Press the red button to cancel the SETUP
TOUR RESTART function.
If you want to make initial settings again
when the next time you turn on the TV,
press the MENU/OK button to activate the
SETUP TOUR RESTART function.
≠
EDIT
PR   CH/CC
 7   CH 09 
 8   CH 11
 9 CH 13 
 10  
 11...

8
Basic setting for picture
COLOUR SYSTEM
You can select the appropriate colour system
when the picture is not clear or no colour
appears.
Press the COLOUR SYSTEM button to select a
setting.
In TV mode:
AUTOPALSECAM
In VIDEO mode:
AUTOPALSECAM
NTSC3.58 NTSC4.43
To operate this function with a menu:
❇
MENUPICTUREPICTURE FEATURES
COLOUR SYSTEM
For the colour system in each country or region,
see the table below:
Area Country or Region SystemBahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
PA...

9
Advance setting for picture
BLUE BACK
You can set the TV to automatically change to a
blue screen and mute the sound if the signal is
weak or absent, or when there is no input from
an antenna.
Select the BLUE BACK in the INSTALL menu,
then choose ON or OFF.
Original features for picture
TELETEXT
You can watch the Teletext broadcast channel
with TEXT function.
1 Press the TEXT button to select the
desired mode as follows:
TV mode  TEXT mode
MIX mode  
2Press the CHANNEL -/+ buttons, number
buttons or...

10
Basic setting for sound
Advanced setting for sound
SOUND SYSTEM
You can select an appropriate sound system when
abnormal sound  occurs even when the picture
appears normally.
Press the SOUND SYSTEM button to select a
setting.
B/GID/K
The function is not available in video mode.
For the sound system in each country or region,
see the table below:
Area Country or Region SystemBahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc. B/G
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India,...