JVC Av 2104ce Instructions

							5
TV buttons and functions
The following illustrations are for AV-1404FE and AV-1403AE only, which are used for
explanation purpose. Your TV may not look exactly like the illustrated.
Front of the TV
AV-1404FE
AV-1403AE
Rear of the TV
AV-1404FE AV-1403AE
OK MENU
CHANNELVOLUME
VIDEO    AUDIOIN (VIDEO-2)
97421865
No. Button/terminal Description1I(main power) Press to turn on or turn off the TV’s main power.
2Power lamp Indicate the TV is being turned on or off.
No colour : TV’s main power is being turned off.
Red : TV’s main power is being turned on.3TIMER lamp Lights when the TV is in the OFF TIMER mode.4Remote control sensor5VOLUME MPress to adjust the volume level.6CHANNELMPress to select the desired channel.7MENU Press to display the menu.8IN (VIDEO-2) Video and audio input jacks for VIDEO-2 mode.9Headphone jack.0Aerial socket.-OUTPUT Video and audio output jacks.=VIDEO-1 INPUT Video and audio input jacks for VIDEO-1 mode.
How to operate the menus with the TV button
Work as same as the button on the
TV button
remote control unitNote
MENU MENU/OK button To display main menu and exit
menu after finish setting.CHANNEL M∞/5 button To select menu function.VOLUME M2/3 button To adjust the desired function.
MENU
OKVIDEO    AUDIO
IN (VIDEO-2)
974321865
VIDEO
AUDIO
0 - =
VIDEO -1
INPUTOUTPUT
VIDEO
AUDIO
VIDEO -1
INPUTOUTPUT
0 - =
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM5
 
						

							6
Setting up your TV
CAUTION
• Turn off the equipment including the TV before connecting.
1Connecting the aerial
To install rod aerial
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VIDEO
AUDIO
VIDEO -1
INPUTOUTPUT
If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV
with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of
the TV with the video cable and audio cables. For details, see the manual of your VCR.
VHF/UHF outdoor aerialindoor aerial
Rod aerial*
Aerial holder
VIDEO
AUDIO
VIDEO -1
INPUTOUTPUT
To RF 
outputTo audio/video output
To aerial input
The illustration shown is just a sample. It may
not be same as your TV.
2Connecting the compatible main plug
to the AC outlet.
3Inserting batteries into the remote
control.
Insert two batteries by following the ª and
· polarities and inserting the · end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work
properly, fit new batteries. The supplied
batteries are for testing, not regular use.
4Turn on the TV by pressing the main
power button.
JVC logo appears on the screen.
Rear of the TV
VHF/UHF outdoor aerial
Rear of the TV
VCR
* For model 14” series only
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM6
 
						

							7
Setting up your TV (continued)
5Making the initial settings
Set up your TV by pressing any buttons except POWER button, then operate the TV menu by
following the steps as below:

  
	


	
7

	 	
• Press the red button to cancel the SETUP
TOUR RESTART function.
If you want to make initial settings again
when the next time you turn on the TV,
press the MENU/OK button to activate the
SETUP TOUR RESTART function.
≠
EDIT
PR   CH/CC
 7   CH 09 
 8   CH 11
 9 CH 13 
 10  
 11 
 12  
 13  
3■
•Proceed to edit the channel list (PR list).
For details, see page 13.



	
êìëëäàâ

ìäê

•Press 5/∞ button to select your desired
language*, then press MENU/OK button.
≠


 	

	


	


	

•Press 5/∞ button to select your desired
Teletext language group. Press MENU/OK.
For details, see page 9.
(For AV-1414FE/AV-2114YE only)
≠


 
	

 



•TV will start searching for the channels.
To stop AUTO PROGRAM, press MENU/OK
button.
•If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO
PROGRAM functions to make the initial settings.
Those functions are located in the INSTALL menu.
•If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO
button to exit from initial settings.
*For AV-14F14/AV-21E14/AV-21F14/AV-21C14, you can select your desired language as follow
ENGLISH/РУССКИЙ//MELAYU/INDONESIA
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM7
 
						

							8
Basic setting for picture
COLOUR SYSTEM
You can select the appropriate colour system
when the picture is not clear or no colour
appears.
Press the COLOUR SYSTEM button to select a
setting.
In TV mode:
AUTOPALSECAM
In VIDEO mode:
AUTOPALSECAM
NTSC3.58 NTSC4.43
To operate this function with a menu:
❇
MENUPICTUREPICTURE FEATURES
COLOUR SYSTEM
For the colour system in each country or region,
see the table below:
Area Country or Region SystemBahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
PA L
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India, etc.East China, Vietnam, etc. PALHong Kong, etc. PAL
Islamic Republic of Iran, Lebanon,
SECAM
Saudi Arabia, etc.Philippines, Taiwan, Myanmar, etc. NTSCRussia, etc. SECAM
EuropeCzech Republic, Poland, etc. PALGermany, Holland, Belgium, etc. PALUK, etc. PALOceania Australia, New Zealand, etc. PALRepublic of South Africa, etc. PALAfrica Nigeria, etc. PAL
Egypt, Morocco, etc. SECAM
PICTURE MODE
You can choose the desired picture setting with
one-touch.
Press the PICTURE MODE button to select a
setting.
SOFT Softens contrast and sharpness.BRIGHT Heightens contrast and sharpness.STANDARD Standard picture setting.
USER You can change this picture setting
as you like.
Select USER and adjust following
items in the PICTURE SETTING menu.
(CONTRAST, BRIGHT, SHARP, COLOUR,
TINT*)
*TINT can only be adjusted in NTSC system.
To operate this function with a menu:
❇
MENUPICTUREPICTURE MODE
To return the USER setting to the default, press
the blue button when the PICTURE SETTING
menu appears.
Adjusting the picture - USER
You can adjust the desired picture setting when
selecting USER in PICTURE MODE.
1Select the USER in PICTURE MODE under
PICTURE menu.
❇ 
USER
MENUPICTUREPICTURE MODE
2Select the PICTURE SETTING in PICTURE
menu, then adjust the setting.
❇ 
MENUPICTUREPICTURE SETTING
CONTRAST2 : Lower contrast3 : Higher contrast
BRIGHT2 : Darker3 : BrighterSHARP2 : Softer3 : HigherCOLOUR2 : Lighter3 : DeeperTINT*2 : Reddish3 : Greenish*TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
(AV-2114YE/AV-2104YE only)
You can improve picture clarity when the picture
is unclear due to the low signal reception.
Press the PICTURE BOOSTER button to select the
desired mode.
❇
MENUPICTUREPICTURE FEATURES
PICTURE BOOSTER
HIGH Perform at maximum level.LOW Perform at minimum level.OFF Cancel the function.
WHITE BALANCE
You can change the white balance of the picture
to better match the type of video being viewed.
Select the WHITE BALANCE in the PICTURE
menu, then choose the desired setting.
❇
MENUPICTUREWHITE BALANCE
NORMAL Normal white balance.COOL Bluish white.WARM Reddish white.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM8
 
						

							9
Advance setting for picture
BLUE BACK
You can set the TV to automatically change to a
blue screen and mute the sound if the signal is
weak or absent, or when there is no input from
an antenna.
Select the BLUE BACK in the INSTALL menu,
then choose ON or OFF.
Original features for picture
TELETEXT
You can watch the Teletext broadcast channel
with TEXT function.
1 Press the TEXT button to select the
desired mode as follows:
TV mode  TEXT mode
MIX mode  
2Press the CHANNEL -/+ buttons, number
buttons or colour buttons to select other
Teletext pages.
3Press TEXT or TV/VIDEO button to return
to TV mode.
You can also operate the teletext using the
following buttons:
55 (Hold) Hold a teletext page.
The 55 (Hold) are displayed at the top
left of the screen.
To cancel, press 55 (Hold) button again. (Reveal) Display the hidden text (e.g. answers to a
quiz).
To cancel, press  (Reveal) button again.55 (Size) Enlarge the teletext display.
 (Index) Return to the index page instantly.
 (Cancel) Watch TV programme while waiting for a
teletext page.
When the teletext page is found, a  page
number appears at the upper left of the
screen.
Press  (Cancel) to view the teletext page. (Sub-page) Operate the  (Sub-page) function.
Sub-page numbers are displayed at the
left of the screen.
To cancel sub-page function, press 
(Sub-page) button again.
Using the List mode
You can store and recall the favorite teletext
pages in memory using the colour buttons.
1In TEXT mode, press the MODE button to
enter the List mode.
❇MENUINSTALLBLUE BACK
If you wish to continue viewing the poor picture,
cancel the BLUE BACK function.
2Press a colour button, then press the
number buttons to enter the page number.
3Press and hold down the 
 (Store)
button. The page number is blinking white
to indicate that they are stored in memory.
4To store other favorite teletext pages,
repeat Step 2 to 3.
To recall the favorite teletext page, press the
MODE button, then press the colour button.
To exit the List mode, press the MODE button
again.
When viewing teletext programme, menu
operations are not available.
If characters on a teletext programme do not
appear properly, change the TEXT LANGUAGE
setting.
TEXT LANGUAGE
You can set the Teletext language group that
corresponds to the programmes.
Select TEXT LANGUAGE in the INSTALL menu,
then choose the desired language group.
❇
MENUINSTALLTEXT LANGUAGE
GROUP- 1 English, German, Swedish / Finnish /
Danish / Hungarian, Italian, French,
Spanish / Portuguese, Turkish
GROUP- 2 Polish, German, Estonian, Slovenian,
Czech / Slovakian, Rumanian
GROUP- 3 Polish, German, Estonian, Lettish,
Russian, UkrainianDepending on the broadcast, the language set
may not display properly.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM9
 
						

							10
Basic setting for sound
Advanced setting for sound
SOUND SYSTEM
You can select an appropriate sound system when
abnormal sound  occurs even when the picture
appears normally.
Press the SOUND SYSTEM button to select a
setting.
B/GID/K
The function is not available in video mode.
For the sound system in each country or region,
see the table below:
Area Country or Region SystemBahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc. B/G
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India, etc.East China, Vietnam, etc. D/KHong Kong, etc. I
Islamic Republic of Iran, Lebanon,
B/G
Saudi Arabia, etc.Philippines, Taiwan, Myanmar, etc. MRussia, etc. D/K
EuropeCzech Republic, Poland, etc. D/KGermany, Holland, Belgium, etc. B/GUK, etc. IOceania Australia, New Zealand, etc. B/GRepublic of South Africa, etc. IAfrica Nigeria, etc. B/G
Egypt, Morocco, etc. B/G
AI VOLUME
You can adjust the volume of all the channels
and video inputs to the same level automatically.
Select the AI VOLUME in SOUND menu, then
choose ON or OFF.
❇
MENUSOUNDAI VOLUME
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM10
 
						

							11
Favorite channel and video setting
To register the favorite channel
You can register and recall 4 favorite channels by
using the colour buttons (red, green, yellow,
blue).
1In TV mode, select a TV channel (PR01- 99)
you desired to register.
2Press and hold a colour button for 3
seconds or more.
“FAVORITE CHANNEL 7 PROGRAMMED!”
appears on the screen and current channel
is registered.
3To register other favorite channels, repeat
Step 1 to 2.
To recall the favorite channel, press the colour
button.
When the TV is in Text mode or menu mode,
favorite channel function is not available.
To adjust favorite channel setting
(FAVORITE CH SETTING)
You can adjust the picture settings for the favorite
channels.
1Display the PICTURE menu and select
FAVORITE CH SETTING in PICTURE
FEATURES menu.
❇
 
FAVORITE CH SETTING
MENUPICTUREPICTURE FEATURES
2Select FAVORITE CHANNEL in FAVORITE
CH SETTING menu, then choose the
desired favorite channel.
❇
 
FAVORITE CHANNEL
FAVORITE CH SETTING
FAVORITE CH SETTING
FAVORITE CHANNEL  PR 01
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
EFFECT ON
3Select EFFECT, then press 2/3 button to
choose ON.
To cancel the settings, choose OFF.
4Select the desired item that you wish to
adjust.
CONTRASTBRIGHTSHARP
TINT COLOUR
5Press the MENU/OK button to exit the
menu.
To adjust the video setting
(VIDEO SETTING)
You can adjust the picture and sound settings for
video inputs.
1Display the PICTURE menu and select
VIDEO SETTING in PICTURE FEATURES
menu.
❇
 
VIDEO SETTING
MENUPICTUREPICTURE FEATURES
2Select VIDEO STATUS in VIDEO SETTING
menu, then choose the desired video
input.
❇ 
VIDEO SETTINGVIDEO STATUS
VIDEO SETTING
VIDEO STATUS  VIDEO-1
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
EFFECT ON
3Select EFFECT, then press 2/3 button to
choose ON. To cancel the settings, choose
OFF.
4Select the desired item that you wish to
adjust.
CONTRASTBRIGHTSHARP
TINT COLOUR
5Press the MENU/OK button to exit the
menu.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM11
 
						

							12
Customized setting
VNR
You can reduce the noise.
Select the VNR in the PICTURE FEATURES menu
under PICTURE menu, then choose a setting of
VNR function.
❇
VNR
MENUPICTUREPICTURE FEATURES
OFF VNR is turned off.AUTO Effect of VNR is automatically controlled.MIN Effect of VNR becomes minimum level.MAX Effect of VNR becomes maximum level.If you select MAX, the picture becomes softer
even if the original picture is sharp.
LANGUAGE
You can choose your desired on screen display
language.
Select the LANGUAGE in the INSTALL menu,
then choose a language.
❇
MENUINSTALLLANGUAGE
CHILD LOCK
You can disable the front control buttons of the
TV.
Select the CHILD LOCK in the FEATURES menu,
then choose ON or OFF.
❇
MENUFEATURESCHILD LOCK
OFF TIMER
You can set the TV to turn off automatically to
standby mode after a set time.
Press the OFF TIMER button to select a desired
period of time.
OFF TIMER
0120
10
You can set the period of time to a maximum of
120 minutes in 10 minutes step.
To operate this function with a menu:
❇
MENUFEATURESOFF TIMER
When the elapsed of time left one minute,
“GOOD NIGHT!” appears on the screen.
You can display the OFF TIMER menu again to
confirm or change the remaining time.
AUTO SHUTOFF
You can set the TV to turn off automatically
when no signal is received for about 15 minutes
or longer after the end of a broadcast.
Select AUTO SHUTOFF in INSTALL menu, then
choose ON or OFF.
❇
MENUINSTALLAUTO SHUTOFF
The AUTO SHUTOFF function does not turn off
the TV’s main power.
The AUTO SHUTOFF function is not available in
video mode.
EXT. INPUT (TV/ VIDEO)
You can select TV or video terminal input with
one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
❇
MENUINPUTEXT.INPUT
DISPLAY
You can display the programme number, video
terminal number and PR list on the screen.
Press the DISPLAY button to display the informa-
tion on screen.
To operate this function with a menu:
❇
MENUINPUTDISPLAY
About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM12
 
						

							13
TV channel presetting
To register the TV channels auto-
matically
You can register the TV channels into the TV’s
channel list automatically.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2Choose AUTO PROGRAM, then press the
MENU/OK button.
AUTO PROGRAM function starts, and the
channels received are registered in the
channel list (PR list) automatically.
3 “SETUP TOUR RESTART?” appears.
To start thePress the MENU/OK button.
SETUP TOUR Then proceed to step 5 of
“Setting up your TV” on page
7.
To skip the Press the Red button.
SETUP TOUR
4 The EDIT menu appears.
To edit the Proceed to the Step 3 of “To
channel list edit the channel list (PR list)”
on this page.
If a channel is Proceed to the Step 3 of “To
not registered register the channel manually”
on this page.To exit the menu Press the MENU/OK button.
For details of “SETUP TOUR”, see page 7.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s
channel list manually.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
EDIT
PR   CH/CC
 7   CH 09 
 8   CH 11
 9 CH 13 
 10  
 11 
 12  
 13  
3■
3 Choose the channel which you want to
register.
4 Press the blue button to activate the
MANUAL function.
The sound system of the channel appears
at the right of the CH/CC number.
5 Press the 3 button to choose an appropri-
ate sound system.
For details, see “SOUND SYSTEM” on
page 10.
6 Press the green or red button to search for
the TV channel.
Searching stops when a channel is found
and displayed.
7 Repeat step 5 until your desired TV
channel appears.
If the reception Press the blue or yellow buttonis poor to fine tune the TV channel.
If noisy sound Press the 3 button to choose
is heard an appropriate sound system.
8 Press the MENU/OK button to exit the
menu.
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR
numbers will be changed.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2 Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
EDIT
PR   CH/CC
 7   CH 09 
 8   CH 11
 9 CH 13 
 10  
 11 
 12  
 13  
3■
3 Choose the channel which you want to
change PR number, or delete.
4 Do the following action:
To change the Press the 3 button. Then move
PR number it to the PR number you want
(MOVE) to use it for the channel.
Finally press the 2 button.
To delete the Press the yellow button.
channel (DELETE)
5 Press the MENU/OK button to exit the
menu.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM13
 
						

							14
TV channel presetting
To add in the new channel
(INSERT in the EDIT menu)
You can add in the new channel in the TV
channel list as you like.
You need to find the “CH/CC” number for the TV
channel. Find the “CH/CC” number correspond-
ing to the channel number of the TV channel
from the attached sheet “CH/CC number list” on
this page.
1Display the INSTALL menu.
❇ 
MENUINSTALL
2Choose EDIT/ MANUAL, then press the
MENU/OK button. EDIT menu appears.
3Choose the PR number for which you will
register a new TV channel.
4Press the green button, then press 5/∞
buttons to choose “CC” or “CH”.
5Press the number button to enter the
remaining CH/CC number.
The TV starts to search the TV channel,
and the picture of the TV channel appears.
If the TV finds no TV channel, a noisy
picture appears.
When a TV channel has already been registered
in PR99, using the INSERT function deletes that
TV channel.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
CH/CC number
When you want to use the INSERT function by
the previous operation, find the CH/CC number
corresponding to the channel number of the TV
channel from this table.
Channel No. CountryUS United States, Philippines, etc..CCIR Middle East, Southeast Asia, etc..OIRT Eastern Europe, Russia, Vietnam, etc..AUSTRALIA Australia, etc..
CH US CCIR OIRTAUSTRALIACH 02 US- 2 E2 R1 AU- 0CH 03 US- 3 E3 AU- 1CH 04 US- 4 E4 R2 AU- 2CH 05 US- 5 E5 R6 AU- 6CH 06 US- 6 E6 R7 AU- 7CH 07 US- 7 E7 R8 AU- 8CH 08 US- 8 E8 R9 AU- 9CH 09 US- 9 E9CH 10 US- 10 E10 R10 AU- 10CH 11 US- 11 E11 R11 AU- 11CH 12 US- 12 E12 R12CH 13 US- 13CH 14 US- 14, W+ 29CH 15 US- 15, W+ 30CH 16 US- 16, W+ 31CH 17 US- 17, W+ 32CH 18 US- 18, W+ 33CH 19 US- 19, W+ 34CH 20 US- 20, W+ 35CH 21 US- 21, W+ 36 E21CH 22 US- 22, W+ 37 E22CH 23 US- 23, W+ 38 E23CH 24 US- 24, W+ 39 E24CH 25 US- 25, W+ 40 E25CH 26 US- 26, W+ 41 E26CH 27 US- 27, W+ 42 E27CH 28 US- 28, W+ 43 E28CH 29 US- 29, W+ 44 E29CH 30 US- 30, W+ 45 E30CH 31 US- 31, W+ 46 E31CH 32 US- 32, W+ 47 E32CH 33 US- 33, W+ 48 E33CH 34 US- 34, W+ 49 E34
CH 35 US- 35, W+ 50 E35
CH US CCIR OIRTAUSTRALIACH 36 US- 36, W+ 51 E36CH 37 US- 37, W+ 52 E37CH 38 US- 38, W+ 53 E38CH 39 US- 39, W+ 54 E39CH 40 US- 40, W+ 55 E40CH 41 US- 41, W+ 56 E41CH 42 US- 42, W+ 57 E42CH 43 US- 43, W+ 58 E43CH 44 US- 44, W+ 59 E44CH 45 US- 45, W+ 60 E45CH 46 US- 46, W+ 61 E46CH 47 US- 47, W+ 62 E47CH 48 US- 48, W+ 63 E48CH 49 US- 49, W+ 64 E49CH 50 US- 50, W+ 65 E50CH 51 US- 51, W+ 66 E51CH 52 US- 52, W+ 67 E52CH 53 US- 53, W+ 68 E53CH 54 US- 54, W+ 69 E54CH 55 US- 55, W+ 70 E55CH 56 US- 56, W+ 71 E56CH 57 US- 57, W+ 72 E57CH 58 US- 58, W+ 73 E58CH 59 US- 59, W+ 74 E59CH 60 US- 60, W+ 75 E60CH 61 US- 61, W+ 76 E61CH 62 US- 62, W+ 77 E62CH 63 US- 63, W+ 78 E63CH 64 US- 64, W+ 79 E64CH 65 US- 65, W+ 80 E65CH 66 US- 66, W+ 81 E66CH 67 US- 67, W+ 82 E67CH 68 US- 68, W+ 83 E68
CH 69 US- 69, W+ 84 E69
CC US CCIR OIRTAUSTRALIACC 01 S- 1 AU- 5CC 02 S- 2CC 03 S- 3CC 04 S- 4CC 05 S- 5CC 06 S- 6 AU- 5ACC 07 S- 7CC 08 S- 8CC 09 S- 9CC 10 S- 10CC 11 S- 11CC 12 S- 12CC 13 S- 13CC 14 A S- 14CC 15 B S- 15CC 16 C S- 16CC 17 D S- 17CC 18 E S- 18CC 19 F S- 19CC 20 G S- 20CC 21 H S- 21CC 22 I S- 22CC 23 J S- 23CC 24 K S- 24CC 25 L S- 25CC 26 M S- 26CC 27 N S- 27CC 28 O S- 28CC 29 P S- 29CC 30 Q S- 30CC 31 R S- 31CC 32 S S- 32CC 33 T S- 33CC 34 U S- 34CC 35 V S- 35CC 36 W S- 36
CC 37 W+ 1 S- 37
CCUS CCIR OIRT AUSTRALIACC 38 W+ 2 S- 38CC 39 W+ 3 S- 39CC 40 W+ 4 S- 40CC 41 W+ 5 S- 41CC42 W+ 6CC 43 W+ 7CC 44 W+ 8CC 45 W+ 9CC 46 W+ 10CC 47 W+ 11CC 48 W+ 12CC 49 W+ 13CC 50 W+ 14CC 51 W+ 15CC 52 W+ 16CC 53 W+ 17CC 54 W+ 18CC 55 W+ 19CC 56 W+ 20CC 57 W+ 21CC 58 W+ 22CC 59 W+ 23CC 60 W+ 24CC 61 W+ 25CC 62 W+ 26CC 63 W+ 27CC 64 W+ 28CC 75 XCC 76 Y R3CC 77 Z R4 AU- 3C 78 Z+ 1  R5CC 79 Z+ 2 AU- 4CC 95 A- 5CC 96 A- 4CC 97 A- 3CC 98 A- 2
CC 99 A- 1
Channel
 GGT0047-001A-H-P02-15 5/27/04, 4:35 PM14