Jura Capresso Ena 5 User Manual

21
ENA 5
Precondition: READY appears on the display.
  TOpen the cover behind the Rotary Switch.
 P  T  Press the P button until RINSE appears.
 g  T  Turn the Rotary Switch until PRODUCT is 
displayed.
 k  T  Press the Rotary Switch to enter the 
programme item.
WATER
 g  T  Turn the Rotary Switch until AROMA is 
displayed.
 k  T  Press the Rotary Switch to enter the 
programme item.
NORMAL
 g  T  Turn the Rotary Switch until STRONG is 
displayed.
 k  T  Press the Rotary Switch to confirm the 
setting....

22
ENA 5
 g  T  Turn the Rotary Switch until 2 HRS is 
displayed.
 k  T  Press the Rotary Switch to confirm the 
setting.
OK, the automatic switch-off time is then 
adjusted.
OFF AFTER
 g  T  Turn the Rotary Switch until EXIT is 
displayed.
 k  T  Press the Rotary Switch to exit program-
ming mode.
READY
Units of water 
The unit for the amount of water can be displayed 
in either ‘ml’ or ‘oz’.
Example: Changing the units of water from 
ML to OZ.
Precondition: 
READY appears on the display.
  TOpen the...

23
ENA 5
  ZRinse the nozzle regularly if it is used to warm 
or froth milk.
Rinsing the machine – manually   
When the ENA is switched on, a prompt to 
perform a rinse operation automatically appears 
after heating. When the ENA is switched off, the 
system is automatically rinsed if a coffee speciality 
has been prepared.
The ‘Rinse machine’ operation can be manually 
initiated.
Precondition: 
READY appears on the display.
  TTurn the coffee spout to the cleaning 
position.
  TPlace a receptacle under...

24
ENA 5
Rinsing of the filter stops automatically, 
CLOSE TAP.
 y  T  Turn the switch to position o.
HEATING
READY
Changing the filter – manually
The ‘Change filter’ operation can be manually 
initiated.
Precondition: 
READY appears on the display.
  TOpen the cover behind the Rotary Switch.
 P  T  Press the P button until RINSE appears.
 k  T  Press the Rotary Switch to enter the 
programme item.
RINSE
 g  T  Turn the Rotary Switch until FILTER is 
displayed.
 k  T  Press the Rotary Switch.
INSERT...

25
ENA 5
  TTurn the coffee spout to the 1 cup or 2 cup 
position.
Cleaning the machine – manually
The ‘Clean machine’ operation can be manually 
initiated.
Precondition: 
READY appears on the display.
  TOpen the cover behind the Rotary Switch.
 P  T  Press the P button until RINSE appears.
 k  T  Press the Rotary Switch to enter the 
programme item.
RINSE
 g  T  Turn the Rotary Switch until CLEAN is 
displayed.
 k  T  Press the Rotary Switch.
EMPTY TRAY
  TContinue with the third prompt to take 
action...

26
ENA 5
  TPlace a receptacle (500 ml min.) under the 
the Connector System©.
 l  T  Turn the switch to position m.
DE-SCALING, water flows out of the 
Connector System© several times.
CLOSE TAP
 y  T  Turn the switch to position o.
DE-SCALING, the descaling operation 
is continued.
EMPTY TRAY
  TEmpty the coffee grounds container and 
drip tray and replace.
  TEmpty the receptacle and place it under the 
Connector System© once more.
FILL WATER TANK
  TRemove the water tank, rinse thoroughly, 
fill with...

27
ENA 5
Cleaning the Professional Cappuccino Frother  
To ensure that the Professional Cappuccino 
Frother works perfectly, you should clean it daily 
when you have been preparing milk.
CAUTION
If the wrong cleaning agent is used, the machine 
could be damaged and/or detergent residues 
could be left in the water.
  TOnly use original JURA care products.
  EThe ENA will not prompt you to clean the 
Professional Cappuccino Frother.
  EThe JURA Cappuccino Cleaner is available 
from stockists.
  TRemove...

28
ENA 5
  EThe ENA will not prompt you to rinse the 
Easy Cappuccino Frother.
  TRemove the milk pipe from the milk carton 
or milk container.
  TFill a receptacle with fresh water and 
immerse the milk pipe in the water.
  TPlace another receptacle under the nozzle.
 g  T  Turn the Rotary Switch until STEAM is 
displayed.
 k  T  Press the Rotary Switch.
HEATING
READY
 appears as soon as the ENA is 
sufficiently heated.
 l  T  Turn the switch to position m.
STEAM, the nozzle and pipe are rinsed.
 y  T...

29
ENA 5
Dismantling and rinsing the 
Easy Cappuccino Frother  
  T
Carefully remove the Easy Cappuccino 
Frother from the Connector System©.
  TDismantle the nozzle completely.
  TRinse all nozzle parts thoroughly with 
running water.
  TReassemble the Easy Cappuccino Frother 
and attach it to the Connector System©.
Dismantling and rinsing the 2-stage frothing 
nozzle  
To ensure the correct function of the 2-stage 
frothing nozzle, clean it regularly if you have 
heated or frothed milk.
  JCAUTION...

30
ENA 5
5 Display messages 
Message Cause/Result Action
FILL WATER TANKThe water tank is empty.
You cannot prepare any coffee 
specialities, hot water or steam.  TFill the water tank (refer to 
Chapter 1 ‘Preparing and using for 
the first time – Filling the water 
tank’).
EMPTY GROUNDSThe coffee grounds container is full. 
You cannot prepare any coffee 
specialities, but you can prepare 
hot water or steam.  TEmpty the coffee grounds 
container and the drip tray.
TRAY MISSINGThe drip tray is not...