Jura Capresso Ena 5 User Manual

11
ENA 5
People, including children, who
  Zdo not have the physical, sensory or mental 
capabilities to use the machine safely or
  Zare inexperienced or lack knowledge in how 
to use the machine safely
must be supervised by a responsible person when 
using it, or must be instructed in how to use it 
correctly.
Safe handling of the CLARIS filter cartridges:
  ZFilter cartridges should be kept out of the 
reach of children.
  ZStore filter cartridges dry in the sealed 
package.
  ZProtect filter...

12
ENA 5
  ZHot water nozzle
3-colour plain text display 
Your ENA features a 3-colour plain text display. 
The colours of the display texts have the following 
meanings:
  ZGreen: Your ENA is ready for use.
  ZRed: The ENA is prompting you to perform an 
action.
  ZYellow: You are in programming mode.
1  Preparing and using for the first time  
This chapter provides the information you need 
for trouble-free use of your ENA and gives you a 
step-by-step guide to preparing your ENA for your 
first coffee...

13
ENA 5
 g  T  Turn the Rotary Switch until LANGUAGE 
ENGLISH
 is displayed.
 k  T  Press the Rotary Switch to confirm the 
language setting.
OK, the language is then adjusted.
OPEN TAP
  TPlace a receptacle under the nozzle.
 l  T  Turn the switch to position m.
SYSTEM FILLING
CLOSE TAP
 y  T  Turn the switch to position o.
HEATING
PRESS ROTARY
  TPlace a receptacle under the coffee spout.
 k  T  Press the Rotary Switch to start rinsing.
RINSIN G
READY
  EWhen a coffee speciality has been prepared 
for...

14
ENA 5
 k  T  Press the Rotary Switch.
OPEN TAP
 l  T  Turn the switch to position m.
FILTER RINSING, water is dis-
charged from the nozzle.
  ERinsing of the filter can be interrupted at 
any time. To this purpose turn the switch 
clockwise.
  EThe water may be slightly discoloured. This 
is not harmful to health and does not affect 
the taste.
Rinsing of the filter stops automatically, 
CLOSE TAP.
 y  T  Turn the switch to position o.
HEATING
READY
The filter is now activated. 
Determining and...

15
ENA 5
  UIf the fineness of grind setting is too fine, 
the coffee only drips from the coffee spout.
  ZSelect a coarse setting for a darker roast.
  UIf the fineness of grind is too coarse the 
coffee flows too quickly from the coffee 
spout.
Example: Adjusting the fineness of grind during 
coffee preparation.
  TPlace the cup under the coffee spout.
 k  T  Press the Rotary Switch to start coffee 
preparation.
  TTurn the fineness of the grinding wheel to 
the desired position while the grinder is...

16
ENA 5
2 Preparation
1 coffee at the touch of a button   
Precondition: READY appears on the display.
  TTurn the coffee spout to the 1 cup position.
  TPlace the cup under the coffee spout.
 k  T  Press the Rotary Switch to start coffee 
preparation.
During grinding the strength of the coffee 
is briefly displayed.
1 CUP, the pre-set amount of water flows 
into the cup, preparation stops automati-
cally.
READY
2 coffees at the touch of a button
Precondition: READY appears on the display.
  TTurn the...

17
ENA 5
1 CUP, the pre-set amount of water flows 
into the cup, preparation stops automati-
cally.
READY
  EIt is also possible to prepare two cups of 
pre-ground coffee. To this purpose place 
two level measuring spoons of pre-ground 
coffee into the filler funnel. Turn the Rotary 
Switch to 
2 CUPS and press to start 
coffee preparation.
One-off setting before and during 
preparation 
The coffee strength can be changed before 
preparation or during the grinding operation.
The following coffee strength...

18
ENA 5
  TPlace a cup under the nozzle.
  TSet the selector lever of the nozzle to the 
milk foam 
p position.
 g  T  Turn the Rotary Switch until STEAM is 
displayed.
 k  T  Press the Rotary Switch.
HEATING
READY
 appears as soon as the ENA is 
sufficiently heated.
 l  T  Turn the switch to position m.
STEAM, the milk foam is being prepared.
 y  T  Turn the switch clockwise to position o 
when there is sufficient milk foam in the 
cup.
  EYou can prepare more milk foam within 
about 40 seconds....

19
ENA 5
Cappuccino with the 2-stage frothing nozzle 
Precondition: READY appears on the display 
and the coffee spout is set at the 1 cup position.
  TPush the 2-stage frothing nozzle to the 
lower position.
  TPlace a cup of milk below the 2-stage 
frothing nozzle and immerse the nozzle in 
the milk.
  EIf the nozzle does not reach into the cup, lift 
the cup towards the nozzle.
 g  T  Turn the Rotary Switch until STEAM is 
displayed.
 k  T  Press the Rotary Switch.
HEATING
READY
 appears as soon as...

20
ENA 5
Heating milk with the 2-stage frothing 
nozzle 
Precondition: READY appears on the display.
  TPush the 2-stage frothing nozzle to the top 
position.
  TPlace a cup of milk below the 2-stage 
frothing nozzle and immerse the nozzle in 
the milk.
  EIf the nozzle does not reach into the cup, lift 
the cup towards the nozzle.
 g  T  Turn the Rotary Switch until STEAM is 
displayed.
 k  T  Press the Rotary Switch.
HEATING
READY
 appears as soon as the ENA is 
sufficiently heated.
 l  T  Turn the...