JBL Synthesis Sdp-5 Manual
Have a look at the manual JBL Synthesis Sdp-5 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 JBL manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
MODE ADJUST JBL Synthesis 5-8Please note the following about dts NEO:6 listening mode activation: •The dts NEO:6 listening modes cannot be assigned as the preferred listening mode for 2-channel sources. However, when the 2-CH parameter is set to USE LAST, the SDP-5 will automatically activate a dts NEO:6 listening mode if a dts NEO:6 listening mode was activated the last time a 2-channel source was present. •The SDP-5 will not automatically activate the dts NEO:6 listening modes unless a 44.1 or 48kHz PCM digital source is present. The dts NEO:6 listening modes are not available with 88.2 or 96kHz, Dolby Digital, or analog sources. •The dts NEO:6 MUSIC listening mode can be activated with the front panel or remote control Mode and buttons. The dts NEO:6 FILM listening mode can also be activated with the remote control dts button when a 2-channel input source is present.dts NEO:6 FILM•Designed for playback of matrix-encoded digital stereo film sources. •Derives six channels when both side and rear speakers are present (rear channels will be in parallel). Derives five channels when only side or rear speakers are present. The subwoofer channel is generated through bass management in the SDP-5. Option/ParameterOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28.dts NEO:6 MUSIC•Designed for playback of matrix-encoded digital stereo music sources. •Derives six channels when both side and rear speakers are present (rear channels will be in parallel). Derives five channels when only side or rear speakers are present. The subwoofer channel is generated through bass management in the SDP-5. Option/ParameterOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28.MODE ADJUST dts neo:6FILM MODE ADJUST dts neo:6MUSIC
MODE ADJUST SDP-5 5-9NIGHTCLUB•Designed for playback of “dry” music sources that benefit from the addition of room reflections, especially music sources that lack ambience in the recording. •Generates early reflections to simulate small, intimate listening spaces. •Sends early reflections to the front, side, and rear channels. •Unlike other room simulation listening modes, this mode uses a proprietary reverb algorithm that is relied upon by a majority of recording engineers to add ambience to recordings. Option/ Default PossibleParameter Setting SettingsCENTER DEPTH 11 0 to 18SPEECH DETECT ON ON, OFFSIZE 5m 4 to 20mLIVENESS 196ms 30ms to 20.2sPRE-DELAY 5ms OFF, 1 to 100msROLLOFF 9.0kHz 500Hz to 20.0kHz, OFFEFFECT LVL +3dB -12 to +6dBOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. CONCERT HALL•Generates early reflections to simulate large listening spaces. •Sends early reflections to the front, side, and rear channels. •Unlike other room simulation listening modes, this mode uses a proprietary reverb algorithm that is relied upon by a majority of recording engineers to add ambience to recordings. Option/ Default PossibleParameter Setting SettingsCENTER DEPTH 12 0 to 18SPEECH DETECT ON ON, OFFSIZE 20m 4 to 20mLIVENESS 1.72s 30ms to 20.2sPRE-DELAY OFF OFF, 1 to 100msROLLOFF 2.4kHz 500Hz to 20.0kHz, OFFEFFECT LVL -2dB -12 to +6dBOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. MODE ADJUST NIGHTCLUB MODE ADJUST CONCERT HALL
MODE ADJUST JBL Synthesis 5-10 CATHEDRAL•Similar to the CHURCH listening mode. •Uses a reverb algorithm to emphasize the rich, smooth, reverberant decay characteristic of large listening spaces with long reverberation time relative to their size, such as cathedrals. •Unlike other room simulation listening modes, this mode uses a proprietary reverb algorithm that is relied upon by a majority of recording engineers to add ambience to recordings. Option/ Default PossibleParameter Setting SettingsCENTER DEPTH 12 0 to 18SPEECH DETECT ON ON, OFFSIZE 30m 4 to 30mMID RT 3.72s 24ms to 24.3sBASS RT 4.47s 5ms to 48.6sPRE-DELAY 23ms OFF, 1 to 100msROLLOFF 3.1kHz 500Hz to 20.0kHz, OFFEFFECT LVL -8dB -12 to +6dBOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. CHURCH•Uses a reverb algorithm to emphasize the rich, smooth, reverberant decay characteristic of small and medium listening spaces with long reverberation time relative to their size, such as churches and chambers. •Unlike other room simulation listening modes, this mode uses a proprietary reverb algorithm that is relied upon by a majority of recording engineers to add ambience to recordings. Option/ Default PossibleParameter Setting SettingsCENTER DEPTH 5 0 to 18SPEECH DETECT ON ON, OFFSIZE 20m 4 to 30mMID RT 1.56s 24ms to 24.3sBASS RT 1.87s 5ms to 48.6sPRE-DELAY 24ms OFF, 1 to 100msROLLOFF 2.4kHz 500Hz to 20.0kHz, OFFEFFECT LVL -3dB -12 to +6dBOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28.MODE ADJUST CHURCH MODE ADJUST CATHEDRAL
MODE ADJUST PANORAMA MODE ADJUST SDP-5 5-11PANORAMA•Designed for playback of stereo and matrix-encoded sources. •Uses proprietary JBL Synthesis algorithms to move the stereo image outward from the front speakers, producing a wider stereo field with greater depth. •Depends on proper location of the listening position and front speakers. When the front speakers are positioned close to either side of the display device, the effect is produced over a wider area than when the front speakers are positioned at a large angle from the display device. Option/ Default PossibleParameter Setting SettingsEFFECT LVL +4dB -12 to +6dBBASS CONTENT STEREO BINAURL, MONO, STEREOLOW FREQ WIDTH +0 -25 to +25SURR ROLLOFF 3.1kHz 500Hz to 20.0kHz, OFFREAR DLY OFFSET 15ms OFF, 1 to 30msINPUT BALANCE L< to to >RCALIBRATION Refer to the next pageOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. PANORAMA CALIBRATION•The PANORAMA listening mode must be calibrated to take full advantage of its effects. •For best results, it is recommended to center the primary listening position between the front left and right speakers as shown in the illustration centered at the top of page 5-13. Otherwise, the PANORAMA listening mode will be calibrated with various results. Option/ Default PossibleParameter Setting SettingsSOURCE LEFT & RIGHT RIGHT, LEFT & RIGHT, LEFTSPEAKER ANGLE 30deg 10 to 90degLISTENER POS +0 -127 to +127Calibration parameter descriptions begin on the next page.To calibrate the PANORAMA listening mode: 1. Remove all obstructions between the speakers and the primary listening position. 2. Make sure the distances between the speakers and the primary listening position are properly measured. Then, enter these distances on the SPEAKER DISTANCES menu. 3. Sit in the primary listening position. If the primary listening position is not centered between the front left and right speakers, set the LISTENER POS parameter to compensate for the difference. Refer to the LISTENER POS parameter description on the next page for assistance. . . . Panorama Calibration continues on page 5-12 MODE ADJUST PANORAMA CALIBRATION
MODE ADJUST JBL Synthesis 5-12 Note:The SOURCE parameter controls the perceived direction of the sound, although both the front left and right speakers generate the calibration sourcesignal. SPEAKER ANGLE 10 to 90deg Compensates for a wide or narrow speaker angle relative to the primary listening position. Select the setting closest to the angle between the front left and right speakers and the primary listening position. LISTENER POS -127 to +127 Compensates for primary listening positions that are not centered between the front left and right speakers. Each increment within the –127 to +127 parameter range represents about one-third of an inch. Refer to the illustrations at the top of the next page for more information about the LISTENER POS parameter range. Note:The LISTENER POS parameter range might extendpast the location of the front left and right speakers. PANORAMA Calibration (continued from page 5-11) To calibrate the PANORAMA listening mode: (continued ) 3. Set the SOURCE parameter (next page) to RIGHT. 4. Begin playback of the calibration source. It is recommended to use a familiar stereo source. 5. When playback of the calibration source is in progress, set the SPEAKER ANGLE parameter (next column) so the sound is not heard in the left ear. 6. Set the SOURCE parameter to LEFT. 7. When playback of the calibration source is in progress, set the SPEAKER ANGLE parameter so the sound is not heard in the right ear. 8. Set the SOURCE parameter to LEFT & RIGHT to confirm the SPEAKER ANGLE and LISTENER POS parameter settings. When the PANORAMA listening mode is properly calibrated, the sound should be perceived to come from all around the primary listening position. If this does not occur, begin again with step 1.SOURCE RIGHT, LEFT & RIGHT, LEFT Controls the perceived direction of the calibration source signal. When set to RIGHT, the sound is perceived to come from the right of the primary listening position. When set to LEFT, the sound is perceived to come from the left of the primary listening position. When set to LEFT & RIGHT, the sound is perceived to come from all around the primary listening position. MODE ADJUST PANORAMA CALIBRATION
MODE ADJUST SDP-5 5-13PA R TY•Designed for playback of stereo sources. •Sends stereo sources to all channels. •Recommended for background music. Option/ParameterOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. 2-CHANNEL•Designed for playback of stereo sources. •Sends stereo sources to the front and subwoofer channels. •Recommended for audio purists and comparison purposes with other listening modes. Option/ Default PossibleParameter Setting SettingsSUB LEVEL +0dB OFF, -30 to +12dBCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. The +0 setting indicates a primary listening position centered between the front left and right speakers. Negative settings (-127 to -1) compensate for primary listening positions located to the left of the center between the front left and right speakers.Positive settings (+1 to +127) compensate for primary listening positions located to the right of the center between the front left and right speakers. LISTENER POS Parameter Settings MODE ADJUST PARTY MODE ADJUST 2-CHANNEL
MODE ADJUST JBL Synthesis 5-14 MONO•Designed for playback of mono sources. •Sends mono sources to the center channel. Option/ Default PossibleParameter Setting SettingsSUB LEVEL +0dB OFF, -30 to +12dBCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. MONO LOGIC•Designed for playback of mono sources. •Uses proprietary JBL Synthesis reverb algorithms to realistically expand mono sources to use all channels, dramatically increasing the perceived width and sense of envelopment of the listening space. Option/ Default PossibleParameter Setting SettingsEFFECT LVL -9dB -12 to +6dBACADEMY FILTER ON ON, OFFSURR ROLLOFF 3.1kHz 500Hz to 20.0kHz, OFFOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28.MONO SURROUND•Designed for playback of mono sources. •Sends mono sources to all channels. Option/ParameterOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28.MODE ADJUST MONO LOGIC MODE ADJUST MONO SURROUND MODE ADJUST MONO
MODE ADJUST SDP-5 5-155.1 L7 FILM•A proprietary listening mode. •Designed for playback of 5.1-channel Dolby Digital-encoded film sources. •Derives seven channels from 5.1-channel input sources. When both side and rear speakers are present, the 5.1 L7 FILM listening mode also increases the perceived length and sense of envelopment of the listening space. •Provides remarkable improvement compared to other decoders. •Recommended for 5.1-channel Dolby Digital-encoded film sources. Option/ Default PossibleParameter Setting SettingsVOCAL ENHANCE +0.0dB +6.0dB, +3.0dB, +0.0dB5 SPKR ENHANCE OFF ON, OFFBASS ENHANCE OFF ON, OFFRE-EQUALIZER ON ON, OFFREAR DLY OFFSET 15ms OFF, 1 to 30msCOMPRESSION OFF AUTO, ON, OFFLFE MIX +0.0dB -10.0 to +0.0dBOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. 5.1 L7 TV•A proprietary listening mode. •Based on the 5.1 L7 FILM listening mode, but specifically tailored for broadcast sources. •Designed for playback of 5.1-channel Dolby Digital-encoded broadcast sources. •Recommended for 5.1-channel Dolby Digital-encoded broadcast sources. Option/ Default PossibleParameter Setting SettingsVOCAL ENHANCE +0.0dB +6.0dB, +3.0dB, +0.0dB5 SPKR ENHANCE OFF ON, OFFBASS ENHANCE OFF ON, OFFRE-EQUALIZER OFF ON, OFFREAR DLY OFFSET 15ms OFF, 1 to 30msCOMPRESSION OFF AUTO, ON, OFFLFE MIX +0.0dB -10.0 to +0.0dBOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. MODE ADJUST 5.1 L7FILM MODE ADJUST 5.1 L7 TV
MODE ADJUST JBL Synthesis 5-165.1 L7 MUSIC•A proprietary listening mode. •Based on the 5.1 L7 FILM listening mode, but specifically tailored for music sources. •Designed for playback of 5.1-channel Dolby Digital-encoded music sources. •Recommended for 5.1-channel Dolby Digital-encoded music sources. Option/ Default PossibleParameter Setting SettingsVOCAL ENHANCE +0.0dB +6.0dB, +3.0dB, +0.0dB5 SPKR ENHANCE OFF ON, OFFBASS ENHANCE OFF ON, OFFRE-EQUALIZER OFF ON, OFFREAR DLY OFFSET 15ms OFF, 1 to 30msCOMPRESSION OFF AUTO, ON, OFFLFE MIX +0.0dB -10.0 to +0.0dBOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28. 5.1 THX, 5.1 THX ULTRA2, & 5.1 THX SurEX•Designed for playback of 5.1-channel Dolby Digital film sources. •Listening mode name differs depending on the encoding present in the input source, the SURROUND EX parameter setting, and the speaker setup. The table on the next page indicates the conditions in which THX Surround EX and THX Ultra2 decoding are engaged. •Allows 7-channel playback of 5.1-channel Dolby Digital sources without Surround EX encoding. •Applies THX re-equalization to simulate high-frequency rolloffs that occur in movie theaters. Most films are mixed for movie theaters, and might sound too bright when played back in home theaters without re-equalization. •Applies THX timbre matching to minimize timbre differences between the front and surround channels, which results in smoother sound movements between them. •When the 5.1 THX ULTRA2 listening mode is activated, ASA processing is applied to signals sent to the rear speakers. Refer to the ASA parameter description on page 3-34 for more information. •When the 5.1 THX ULTRA2 listening mode is activated, adaptive de-correlation increases the perceived width of the listening space. De-correlation of the mono surround channel increases the perceived width of the surround field in home theaters. •When the 5.1 THX SurEX listening mode is activated, matrix decoding derives three surround channels from 5.1-channel Dolby Digital sources. •Recommended for home theaters with THX-certified loudspeakers. MODE ADJUST 5.1 L7 MUSIC MODE ADJUST 5.1 THXI 5.1 THXISurEX 5.1 THXIULTRA2 OR OR
Option/ Default PossibleParameter Setting SettingsRE-EQUALIZER ON ON, OFFSURROUND EX AUTO AUTO, ON, OFFCOMPRESSION OFF AUTO, ON, OFFLFE MIX +0.0dB -10.0 to +0.0dBOUTPUT LEVELSCUSTOMListening mode menu option and parameter descriptions begin on page 5-28.The table below indicates the conditions in which THX Surround EX and THX Ultra2 decoding are engaged. •THX Surround EX decoding is engaged when the SURROUND EX parameter is set to ON, or the SURROUND EX parameter is set to AUTO and a flagged 5.1-channel Dolby Digital source with THX Surround EX encoding is detected. •THX Ultra2 decoding is engaged when the SURROUND EX parameter is set to OFF, or the SURROUND EX parameter is set to AUTO and a non-flagged 5.1-channel Dolby Digital source with or without THX Surround EX encoding is detected. MODE ADJUST SDP-5 5-17 5.1-Channel Surround EX-Encoded Dolby Digital (Non-Flagged) 5.1-Channel Surround EX-Encoded Dolby Digital (Flagged) 5.1-Channel Dolby Digital5.1 THX ULTRA2 5.1 THX SurEX 5.1 THX ULTRA2 SURROUND EX: AUTO5.1 THX SurEX 5.1 THX SurEX 5.1 THX SurEX SURROUND EX: ON 5.1 THX ULTRA2 5.1 THX ULTRA25.1 THX ULTRA2 SURROUND EX: OFF Parameter SettingInput Source •Listening mode name differs depending on the encoding present in the input source, the SURROUND EX parameter setting, and the speaker setup. –The 5.1 THX ULTRA2 listening mode is available when THX Ultra2 decoding is engaged. –The 5.1 THX SurEX listening mode is available when THX Surround EX decoding is engaged. –The 5.1 THX listening mode is available when neither THX Ultra2 nor Surround EX decoding is engaged. –The 5.1 THX ULTRA2 and 5.1 THX SurEX listening modes cannot be activated unless side and rear speakers are present. Note:The SDP-5 cannot automatically detect THX Surround EX encoding in non-flagged 5.1-channel Dolby Digital sources. A non-flagged source does not include information in the input signal that identifiesTHX Surround EX encoding.