Home
>
Innovative Concepts in Entertainment
>
Games
>
Innovative Concepts In Entertainment Super Chexx Owners Service Manual
Innovative Concepts In Entertainment Super Chexx Owners Service Manual
Here you can view all the pages of manual Innovative Concepts In Entertainment Super Chexx Owners Service Manual. The Innovative Concepts in Entertainment manuals for Games are available online for free. You can easily download all the documents as PDF.
Page 11
MAINTENANCE ICE SURFACE The ice surface should be cleaned as needed, using Windex, Fantastic, or a comparable product. Apply liberally to a lint–free cloth, wipe surface thoroughly, and let dry. For a “faster” ice surface, dust lightly with Pledge and let dry. DOME The Lexan dome should be cleaned as needed, using a furniture polish type of cleaner. Apply to a lint–free cloth and wipe dome thoroughly. NOTE: PLEDGE IS RECOMMENDED. ALWAYS TEST THE CLEANER YOU INTEND TO USE ALONG THE FLANGE TO MAKE SURE...
Page 12
MAINTENANCE GEARBOXES Gearboxes should be inspected periodically to ensure smooth operation. Gearbox tracks should be kept as clean as possible. If a gearbox seems to rotate stiffly, first check to see that a rod collar is not pushed up tightly against it (this can happen if a grip comes off a rod and a gearbox hits a solid object, usually on defensemen). Back off a collar from a gearbox by loosening, moving, and retightening. NOTE GEARBOXES ARE LUBRICATED FOR LIFE AND SHOULD NOT BE OILED OR GREASED....
Page 13
TROUBLESHOOTING AND REPAIR PUCK WILL NOT EJECT For some ejection problems the ice surface may have to be removed. 1. Opening the dome and sliding all of the players to the center ice can correct dirt in the puck ramps. Next, remove the goalies one at a time, bend up the ice surface and clean the ramps. Assemble in the reverse order. A leaning puck ramp can be corrected by observing which way the puck leans as it rolls down the ramp and bending the ramp to one side or the other, back by the net chute...
Page 14
TROUBLESHOOTING AND REPAIR GEARBOX IS DIFFICULT TO TURN 1. A gearbox–coupling collar may have been forced against a gearbox causing uneven or difficult turning. The usual cause for this is a handle grip coming off a rod and allowing the gearbox to hit either another gearbox or a cabinet end. To repair, simply loosen the collar and back it away from the gearbox between 1/32” and 1/16”. Retighten. 2. Gear teeth being stripped out will generally cause binding at certain points of rotation. This...
Page 15
TROUBLESHOOTING AND REPAIR COINS NOT REGISTERED CORRECTLY 1. A bad micro–switch may be a problem due to internal failure. Test with an ohmmeter. Replace if necessary. 2. Loose connections may cause money to be registered improperly. Check the connectors from the coin mechanisms, as well as the connectors on the main PC Board. Repair if necessary. 3. A bad capacitor (CZ5) on the main PC Board may cause bounce problems with the micro–switch. Run electronics tests to determine the problem. NO “OH”...
Page 16
TROUBLESHOOTING AND REPAIR TOP CABINET ASSEMBLY WITH ICE SURFACE & PLAYERS INSTALLED PLAYER WITH LONG STICK PLAYER WITH LONG STICK PLAYER NUMBERING AND LAYOUT 18 Long12 Short 6 Short4 Short 30 Goalie 14 Short14 Short 30 Goalie 4 Short6 Short 12 Short18 Long
Page 17
TROUBLESHOOTING AND REPAIR TOP CABINET ASSEMBLY WITH ICE SURFACE & PLAYERS REMOVED LEFTRIGHT GRIP LONG COLLAR GRIP EJECTOR CHUTE COLLAR RUBBER DEFENSE “BOO”SHORT CABINETLEFTHINGE “BOO” RIGHT DEFENSE CENTERSOLENOID COLLAR GOALIE ROD BEARING SCOREBOARD CABLE
Page 18
PARTS LIST 745 DECAL (CABINET) (NEW STYLE) 1002X ROD COLLAR (LONG) 1003X ROD COLLAR (SHORT) 1004X GOALIE TRACK GOALIE SWING ARM 1007X PLAYER TRACK 1 & 8 EACH 1008X PLAYER TRACK 2 & 7 EACH 1009X PLAYER TRACK 3 & 6 EACH 1010X PLAYER TRACK 4 & 5 EACH 1012 CTR. EJECT RETAINER CHUTE 1013 PUCK RAMP ASSY. 1014 SCORE SENSOR BRACKET SOLENOID STOP BRACKET 1016 DOME HINGE 1018 GOALIE BEARING ASSY. 1019 CENTERMAN STOP EJECT SOLENOID BRACKET 243X DISPLAY PCBA 248 PL 7 TRANSFORMER 249 PL 7 BULB PL 7 SOCKET 2001...
Page 19
D C B A 4321 D C B A4321 DATE3/1/00 DESCRIPTION#279X-BASE HARNESS #SC2027X-POW ER CORD DRAW N BYCHERYLZ1 FILENAM ESC_VSD..VSD PAGE1 OF 4REVISED6/27/01 TITLE 1 2 3 4 5 6 7 8 9 10 11 12 #PC20217 #2558 .250 FLAG #648 .250 FLAG #648 #638 #638 #651 #651 SPEAKER #HD20224 5v COUNTER yellow BLACK WHITE black RED GREEN/YELLOW brown BLACK GREEN BLUE #SC2027X-POWER CORD #PC20217 SUPER CHEXX 12 PIN PLUG #2106 SPLIT PIN #2100 PIN 4+10 USE PART 20-14 AW G #8260 COIN 2 +12v CCNT- ACN COIN COM +12v FRAME GND COIN 1 ACH...
Page 20
D C B A 4321 D C B A4321 DATE3/1/00 DESCRIPTION#278X-CABINET HARNESSDRAW N BYCHERYLZ1 FILENAM ESC_VSD..VSD PAGE2 OF 4REVISED6/27/01 TITLESUPER CHEXX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 PIN PLUG #2144 SPLIT PIN #2100 .250 #653T.250 #653T 2 1 #651 #651 #651#651 #651#651.250 #653T.250 #653T 2 1 red black white lt.bluegreen yellow GOAL 2 BOO 2ORANGE ORANGE blue lt. blue gray yellow BOO 1 EJECT+ - #278X-CABINET HARNESS #8068#639 14 AW G GREEN/YELLOW PART OF #278X 105 TO CASHBOXTO HINGE SOG -...