InFocus Projector X17 User Manual
Have a look at the manual InFocus Projector X17 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Table of contents 2 Table of contents Introduction.................. 3 Projector features........................... 3 Shipping contents .......................... 4 Projector exterior view ................... 5 Controls and functions ................... 6 Positioning your projector ....................... 9 Choosing a location ....................... 9 Obtaining a preferred projected image size .................................... 10 Connection ................. 13 Connecting a computer or monitor ......................................... 13 Connecting Video source devices ......................................... 15 Operation.................... 19 Starting up the projector............... 19 Using the menus .......................... 20 Utilizing the password function .... 21 Switching input signal .................. 23 Adjusting the projected image...... 24 Magnifying and searching for details ..................................... 26 Selecting the aspect ratio............. 26 Optimizing the image ................... 28 Setting the presentation timer ...... 32 Hiding the image .......................... 33 Locking control keys .................... 33 Freezing the image ...................... 34 Operating in a high altitude environment ................................. 34 Adjusting the sound ..................... 34Personalizing the projector menu display.......................................... 35 Shutting down the projector ......... 35 Menu operation ............................ 36 Maintenance ............... 43 Care of the projector .................... 43 Lamp information ......................... 44 Troubleshooting ........ 50 Specifications ............ 51 Projector specifications ................ 51 Dimensions .................................. 52 Timing chart ................................. 52 Copyright information ................. 54
Introduction 3 Introduction Projector features The projector integrates high-performance optical engine projection and a user- friendly design to deliver high reliability and ease of use. The projector offers the following features. • Wall color correction allowing projection on surfaces of several predefined colors • Quick auto search speeding up the signal detecting process • Selectable password protected function • Up to 11 sets of picture modes providing multiple choices for different projection purposes • 3D color management allowing color adjustments to your liking • Selectable quick cooling function makes the projector cool in a shorter time • Presentation timer for better control of time during presentations • One-key auto-adjustment to display the best picture quality • Digital keystone correction to correct distorted images • Adjustable color balance control for data/video display • High brightness projection lamp • Ability to display 16.7 million colors • Multi-language On-Screen Display (OSD) menus • Switchable normal and economic modes to reduce the power consumption • Component HDTV compatibility (YP bPr) • High quality manual zoom lens • The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly proportional to projection distance. • The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This is normal and expected behavior.
Introduction 4 Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Optional accessories 1. Ceiling mount, wall mount 2. LiteShow II wireless presentation adaptor 3. Pull down and pull up 4:3 screens 4. Cables and adaptors 5. Replacement lamp 6. Optional casesProjector Power Cord VGA Cable Reference Guide CDRegistration CardQuick Start GuideWarranty BookletSafety Booklet Pull the tab before using the remote control. Remote Control & Battery
Introduction 5 Projector exterior view 1. External control panel (See Projector and remote control on page 6 for details.) 2. Vent (heated air exhaust) 3. Quick-release button 4. Lens cover 5. Focus ring and Zoom ring 6. Front IR remote sensor 7. Projection lens 8. AC power cord inlet 9. RS-232 control port 10. RGB signal output socket 11. RGB (PC)/Component video (YPbPr/YCbCr) signal input socket 12. Video input socket 13. S-Video input socket 14. Audio signal input socket 15. Kensington anti-theft lock slot 16. Quick-release foot 17. Lamp cover 18. Rear adjuster foot Warning • THIS APPARATUS MUST BE EARTHED. • When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible socket-outlet near the unit. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug. Front/upper side 7 6 1 2 3 4 5 Rear/lower side 1618 151312111098 17 14
Introduction 6 Controls and functions Projector and remote control 1. Focus ring Adjusts the focus of the projected image. See Fine-tuning the image size and clarity on page 25 for details. 2. Zoom ring Adjusts the size of the image. See Fine-tuning the image size and clarity on page 25 for details. 3. TEMPerature indicator light Lights up red if the projectors temperature becomes too high. See Indicators on page 49 for details. 4. POWER indicator light Lights up or flashes when the projector is under operation. See Indicators on page 49 for details.5. POWER Toggles the projector between standby mode and on. See Starting up the projector on page 19 and Shutting down the projector on page 35 for details. 6. Left/BLANK Used to hide the screen picture. See Hiding the image on page 33 for details. 7. MODE/ENTER Selects an available picture setup mode. See Selecting a picture mode on page 28 for details. Enacts the selected On-Screen Display (OSD) menu item. See Using the menus on page 20 for details. 1 8 12 9 10 7 13 3 6 4511 11 2 5 13 14 15 16 17 12 8 11 117 10 II
Introduction 7 8. MENU/EXIT Turns on the On-Screen Display (OSD) menu.Goes back to previous OSD menu, exits and saves menu settings. See Using the menus on page 20 for details. 9. LAMP indicator light Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See Indicators on page 49 for details. 10. AUTO Automatically determines the best picture timings for the displayed image. See Auto-adjusting the image on page 24 for details. 11. Keystone/Arrow keys ( / Up, /Down) Manually corrects distorted images resulting from an angled projection. See Correcting keystone on page 25 for details. 12. Right/ Activates panel key lock. See Locking control keys on page 33 for details. When the On-Screen Display (OSD) menu is activated, the #6, #11, and #12 keys are used as directional arrows to select the desired menu items and to make adjustments. See Using the menus on page 20 for details.13. SOURCE Displays the source selection bar. See Switching input signal on page 23 for details. 14. Freeze Freezes the projected image. See Freezing the image on page 34 for details. 15. Left Selects the desired menu items and to make adjustments. See Using the menus on page 20 for details. 16. BLANK Used to hide the screen picture. See Hiding the image on page 33 for details. 17. Digital Zoom keys (+, -) Magnifies or reduces the projected picture size. See Magnifying and searching for details on page 26 for details.
Introduction 8 Remote control effective range Infra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projectors IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam. Replacing the remote control battery 1. Pull out the battery holder. Please follow the illustrated instructions. Push and hold the locking arm while pulling out the battery holder. 2. Insert the new battery in the holder. Note the positive polarity should face outward. 3. Push the holder into the remote control. CAUTION • Avoid excessive heat and humidity. • There may be battery damage if the battery is incorrectly replaced. • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used battery according to the battery manufacturer’s instructions. • Never throw a battery into a fire. There may be danger of an explosion. • If the battery is dead or if you will not be using the remote control for a long time, remove the battery to prevent damage to the remote control from possible battery leakage. A pprox . 15°
Positioning your projector 9 Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability. 2. Front Ceiling Select this location with the projector suspended upside-down from the ceiling in front of the screen. Purchase the InFocus projector ceiling mount kit from your dealer to mount your projector on the ceiling. Set Front Ceiling in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on. 3. Rear Table Select this location with the projector placed near the floor behind the screen. Note that a special rear projection screen is required. Set Rear Table in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on. 4. Rear Ceiling Select this location with the projector suspended upside-down from the ceiling behind the screen. Note that a special rear projection screen and the InFocus projector ceiling mounting kit are required for this installation location. Set Rear Ceiling in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on.
Positioning your projector 10 Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. 4:3 is the native aspect ratio of this projector. To be able to project a complete 16:9 (widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projectors native aspect width. This will result in a proportionally smaller height equivalent to 75% of the projectors native aspect height. Thus, a 16:9 aspect image will not utilize 25% of the height of a 4:3 aspect image displayed by this projector. This will be seen as darkened (unlit) bars along the top and bottom (vertical 12.5% height respectively) of the 4:3 projection display area whenever displaying a scaled 16:9 aspect image in the vertical center of the 4:3 projection display area. The projector should always be placed horizontally level (like flat on a table), and positioned directly perpendicular (90° right-angle square) to the horizontal center of the screen. This prevents image distortion caused by angled projections (or projecting onto angled surfaces). The modern digital projector does not project directly forward (like older style reel- to-reel film projectors did). Instead, digital projectors are designed to project at a slightly upward angle above the horizontal plane of the projector. This is so that they can be readily placed on a table and will project forward and upwards onto a screen positioned so that the bottom edge of the screen is above the level of the table (and everyone in the room can see the screen). If the projector is mounted on a ceiling, it must be mounted upside-down so that it projects at a slightly downward angle. You can see from the diagram on page 12, that this type of projection causes the bottom edge of the projected image to be vertically offset from the horizontal plane of the projector. When ceiling mounted, this refers to the top edge of the projected image. If the projector is positioned further away from the screen, the projected image size increases, and the vertical offset also increases proportionately. When determining the position of the screen and projector, you will need to account for both the projected image size and the vertical offset dimension, which are directly proportional to the projection distance. InFocus has provided a table of 4:3-aspect-ratio screen sizes to assist you in determining the ideal location for your projector. There are two dimensions to consider, the perpendicular horizontal distance from the center of the screen (projection distance), and the vertical offset height of the projector from the horizontal edge of the screen (offset).4:3 aspect image in a 4:3 aspect display area16:9 aspect image scaled to a 4:3 aspect display area