Home > InFocus > Projector > InFocus Projector Lp260 User Manual

InFocus Projector Lp260 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual InFocus Projector Lp260 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							13
    Using the Remote Control
    To control the computer ’s mouse from the projector ’s remote or 
    keypad, you must connect one of the Control cables to the com-
    puter. See page 7 for details. 
    Turn the remote on using the 
    on/off button on the side of the 
    remote. Point the remote control at the projection screen or at the 
    front of the projector (not at the computer). The range for opti-
    mum operation is about 16 feet and 60 degrees from the front of 
    the projector (see Figure 10). If you point the remote at the projec-
    tion screen, the distance to the screen and back to the projector 
    must be less than or equal to 16 feet. For best results, point the 
    remote directly at the projector.
    FIGURE 10
    Remote range
    60º
    16.4’ (5m) 
    						
    							14
    Using the Projector
    F
    IGURE 11
    Remote control
    Press anywhere on the edge of the point button to move the cur-
    sor on the screen. You can move the cursor at any angle by press-
    ing the corresponding edge of the button. See “Using the Keypad 
    and Remote Buttons” starting on page 15 for a description of the 
    function buttons.
    If you are creating presentations in Microsoft
    ® PowerPoint®, you 
    can use the remote’s 
    right click, select, and point buttons to navi-
    gate through your presentation while in Slide Show mode. To 
    configure PowerPoint for this, choose Options from the Tools 
    menu, click the View Tab, de-select the “Popup Menu on Right 
    Mouse Click” option in the Slide Show section, then click OK. 
    Then, when you’re in PowerPoint’s Slide Show mode, a left click 
    advances to the next slide and a right click returns to the previous 
    slide (other PowerPoint modes are not affected).
    on
    all offvolume
    power
    d.zoom
    keystone
    video
    menumute
    p-timer
    blank freeze
    auto imagenormal
    computer
    lock
    on/off switch
    point button
    right click button
    select button 
    						
    							15
    Using the Keypad and Remote Buttons
    FIGURE 12
    Keypad buttons
    Point button (1 button on remote, 4 buttons on keypad)
    Press this button to navigate in the menus, make adjustments to 
    menu items, or pan the image in Digital Zoom mode. When you 
    press the center of this button on the remote, it works like the 
    select button.
    Select button
    Use the select button to confirm a selection in the menus. See 
    “Using the On-Screen Menus” on page 17.
    Po w e r
    Press this to turn the projector on and off. See page 9 for the 
    power-up sequence and page 10 for the power off sequence.
    Menu 
    Press the menu button to open the on-screen menus. Press menu 
    again to close the menus. For more information about the on-
    screen menus, see page 17.
    Normal
    This feature restores the projector ’s factory set, default settings. It 
    affects all the parameters in the Image menu except horizontal 
    size and fine sync.
    lampreadywarning
    temp.lamp
    replacepowermenu
    normal source
    widetele
    point buttons (4)select button 
    						
    							16
    Using the Projector
    Source (keypad only) or Computer and Video (remote only)
    When you have more than one source (computer and video) con-
    nected to the projector, select between them by pressing the 
    source button on the keypad or the computer or video button on 
    the remote. 
    Ke y s t o n e
    Use this button to adjust the keystone distortion. See page 12 for 
    details.
    d. zoom (digital zoom)
    This allows you to zoom a computer image. See page 25 for 
    details.
    Vo l u m e  
    To increase the volume, press volume +. To decrease the volume, 
    press 
    volume -.
    Mute
    Press mute to mute the sound. To restore the sound to its previous 
    level, press the 
    mute button again or the volume +/- button.
    P-timer button
    This feature allows you to set a timer. Press the p-timer button to 
    display and start the timer. Press it again to stop the timer. Press it 
    again to remove the timer from the display.
    Blank 
    When you press blank, the display and audio turn off and a blank 
    screen is displayed until you press the 
    blank button again or any 
    function button.
    Freeze
    Press the freeze button to freeze the image on the screen. To 
    unfreeze the image, press the 
    freeze button again or any function 
    button.
    Auto Image
    Press this button to automatically adjust the image. See page 23 
    for details.
    Right Click 
    Use this button to compress the image in Digital Zoom mode (see 
    page 25).  
    						
    							17
    Using the On-Screen Menus
    The projector
     has menus that allow you to make image adjust-
    ments and change a variety of settings. Most of these adjustments 
    aren’t available directly from the keypad. 
    NOTE: Some menu items may be 
    grayed out (dimmed) at certain 
    times. This indicates the item is 
    not applicable to your setup or the 
    item is not enabled until another 
    selection is made.
    To open the on-screen menus, press the menu button on the 
    remote or keypad. A red frame appears around the selected 
    menu. Use the 
    point buttons on the remote or keypad to move the 
    cursor left and right. To select an item, press the 
    select button on 
    the remote or keypad.
    FIGURE 13
    Computer menus
    F
    IGURE 14
    Keypad and remote navigation and selection buttons
    To change a menu setting, use the up and down point buttons to 
    move the cursor up and down to the item you want to change 
    (the pointer changes to a red arrow), then use the left and right 
    point buttons or the select buttons to adjust a setting. All changes 
    are saved when you close the menus.
    To access another menu, use the up 
    point button to return to the 
    menu bar, then use the right and left 
    point buttons to move to the 
    desired menu (you may need to Quit out of a menu before navi-
    gating to the top menu.)
    computer
    auto
    PCscreenlanguage
    setting position system mode
    image image
    adjust
    powermenu
    normalmode
    point buttons (4)
    select button
    point button 
    						
    							18
    Using the Projector
    Computer Adjustments
    Select Computer mode by pressing the 
    source button on the key-
    pad, pressing the 
    computer button on the remote, or clicking the 
    Computer icon in the menu. When you select Computer, the cur-
    rent mode display appears, showing details of the connected 
    computer.
    System Menu
    The projector automatically adjusts to most incoming computer 
    signals and projects the image without any user interaction. If a 
    problem is encountered, the message “Go to PC adj.” may appear 
    and the settings must be input manually. If the message “No sig-
    nal” appears, verify the connections between the projector and 
    the computer. See Troubleshooting on page 39 for more informa-
    tion.
    To select the computer system manually:
    1Select the System menu (see “Using the On-Screen Menus” on 
    page 17 for menu navigation details).
    The “System” menu appears.
    system menu 
    						
    							19
    2Press the point down button, move the arrow to the system you 
    want to select, then press the 
    select button. 
    These systems are set up using the PC Adjustment menu.
    PC Adjustment
    NOTE: This feature is not avail-
    able when RGB, HDTV1035i, or 
    HDTV1080i is selected in the Sys-
    tem menu.
    The projector automatically adjusts to most incoming computer 
    signals and projects the image without any user interaction. 
    However, some computers employ unique signal formats that the 
    projector cannot handle properly. These images may flicker or 
    appear non-synchronized. The PC adjustment feature allows you 
    to specify parameters to match the unique signal formats and 
    save and restore five different unique settings.
    1Select the PC Adjust menu.
    The “Where to reserve” menu appears.
    2Select where to save the settings. “Free” indicates no settings 
    have been saved; “Stored” indicates settings have been saved.
    The “Parameter adjustment” menu appears.
    PC adjust menu 
    						
    							20
    Using the Projector
    3Move to the parameter you want to change using the point up/
    down
     buttons, and adjust each setting using the point right/left 
    buttons.
    4Navigate to “Save” and press the 
    select button.
    The parameter is memorized in the selected mode.
    5To activate the mode, select it in the System Select menu (see 
    “System Menu” on page 18.)
    To t a l  L i n e s
    The number of vertical lines. 
    Horiz. Size
    The number of dots in one horizontal period.
    H Position/V Position
    The left/right and up/down position of the image.
    Clamp
    The clamp level. If the image has dark bars, use this adjustment. 
    						
    							21
    Display area
    The area displayed by the projector. Point the arrow at the Dis-
    play area option and press the 
    select button to open a dialog box 
    where you can select the resolution from a list, or adjust the value 
    with the left and right 
    point buttons.
    Full Screen
    Select On to resize the image with a 4x3 aspect ratio.
    After adjusting the settings, press Save to save the settings, press 
    Reset to recall the saved settings, press Mode Free to clear the 
    previously saved settings, and press Quit to close the menu. 
    						
    							22
    Using the Projector
    Image Menu
    The Image menu allows you to manually adjust the image.
    1Select the Image menu.
    The “Image Adjustments” menu appears.
    Fine sync
    Adjust the sync as necessary from 0 to 255 to eliminate flicker in 
    the image.
    Horiz. Size
    Press the point buttons to adjust the number of dots in one hori-
    zontal period.
    Color Balance (Red, Green, Blue)
    Press the point left button to lighten the color and the point right 
    button to deepen the color from 0 to 63.
    Contrast
    Press the point left button to decrease the contrast and the point 
    right
     button to increase the contrast from 0 to 63.
    Brightness
    Press the point left button to darken the image and the point right 
    button to lighten the image from 0 to 63.
    image menu 
    						
    All InFocus manuals Comments (0)

    Related Manuals for InFocus Projector Lp260 User Manual