InFocus Projector IN5312a User Manual
Have a look at the manual InFocus Projector IN5312a User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 493 InFocus manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
— 24 —
MAIN
MENU
SUB MENU
SETTINGS
Settings 2 Auto Source Off, On
No Signal
Power Off 0~180
Auto Power
On Off, On
Lamp Mode
ECO , Normal, Boost
Reset All
Status Active Source
Video Information
Lamp Hours
(ECO, Normal, Boost)
Software Version
Serial Number
Advanced 1 Menu Position
Center, Down, Up, Left, Right
Translucent Menu 0%, 25%, 50%, 75%, 100%
Low Power Mode
Off, Low Power, On by Lan, VGA
Out Mode
Fan Speed Normal, High
Lamp Hour Reset
Projector ID 0-98
Network Network State Connect, Disconnect
DHCP Off, On
IP Address 0~255, 0~255, 0~255. 0~255
Subnet Mask 0~255, 0~255, 0~255. 0~255
Gateway 0~255, 0~255, 0~255. 0~255
DNS 0~255, 0~255, 0~255. 0~255
Apply Ok / Cancel
Video Overscan Off, On
Advanced 2 Sleep Timer 0~600
Source Filter DVI Disable, Enable
HDMI Disable, Enable
DisplayPort Disable, Enable
VGA1 Disable, Enable
VGA2 Disable, Enable
BNC Disable, Enable
Component Video Disable, Enable
S-Video Disable, Enable
Composite Video Disable, Enable
– 25 – Image Menu Attention ! When image options are changed, the Display Mode changes to User. Press the MENU button to open the OSD menu. Press ◄► to move to the Image Menu. Press ▲▼ to move up and down in the Image menu. Press ◄► to enter and change values for settings. ITEM DESCRIPTION Display Mode Press ◄► to enter and set the Display Mode. Brightness Press ◄► to enter and adjust the display brightness. Contrast Press ◄► to enter and adjust the display contrast. Computer Press (Enter) / ► to enter the Computer menu. See Computer Menu on page 26. Auto Image Press (Enter) / ► to automatically adjust phase, tracking, size and position. Advanced Press (Enter) / ► to enter the Advanced menu. See Advanced Feature on page 27. Color Manager Press (Enter) / ► to enter the color manager menu. See page 28 for more information on Color Manager.
— 26 — Computer Menu Press the MENU button to open the OSD menu. Press ◄► to move to the Image menu. Press ▲▼ to move to the Computer menu and then press Enter or ►. Press ▲▼ to move up and down in the Computer menu. ITEM DESCRIPTION Horizontal Position Press ◄► to enter and adjust the display position to left or right. Vertical Position Press ◄► to enter and adjust the display position to up or down. Frequency Press ◄► to enter and adjust the A/D sampling clock. Tracking Press ◄► to enter and adjust the A/D sampling dot.
– 27 – Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Advanced menu and then press Enter or ►. Press ▼▲ to move up and down in the Advanced menu. ITEM DESCRIPTION Brilliant Color Press ◄► to enter and adjust the Brilliant Color value. Sharpness Press ◄► to enter and adjust the display sharpness. Gamm~ Press ◄► to enter and adjust the gamma correction of the display. Color Temperature Press ◄► to enter and adjust the color temperature. Video AGC Press ◄► to enter and enable or disable the Automatic Gain Control for video source. Video Saturation Press ◄► to enter and adjust the video saturation. Video Tint Press ◄► to enter and adjust the video tint/hue.
— 28 — Color Manager Press the Menu button to open the OSD menu. Press ◄► to move to the Image menu. Press ▼▲ to move to the Color Manager menu and then press Enter or ►. Press ▼▲ to move up and down in the Color Manager menu. ITEM DESCRIPTION Red Select to enter the Red Color Manager. Press ◄► to adjust the Hue, Saturation, and Gain. Green Select to enter the Green Color Manager. Press ◄► to adjust the Hue, Saturation, and Gain. Blue Select to enter the Blue Color Manager. Press ◄► to adjust the Hue, Saturation, and Gain. Cyan Select to enter the Cyan Color Manager. Press ◄► to adjust the Hue, Saturation, and Gain. jagenta Select to enter the Magenta Color Manager. Press ◄► to adjust the Hue, Saturation, and Gain. Yellow Select to enter the Yellow Color Manager. Press ◄► to adjust the Hue, Saturation, and Gain. White Select to enter the White Color Manager. Press ◄► to adjust the Red, Green, and Blue.
– 29 –
Settings 1 Menu
Press the MENU button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press
the ▲▼ to move up and down in the Settings 1 menu. Press ◄► to enter and change values for
settings.
ITEM DESCRIPTION
Source Press (Enter) / ► to enter the Source menu. oeference input Source select
(Io / Keypad).
Projection Press ◄► to enter and choose from four projection methods: Normal, Ceiling, Rear,
and Rear + Ceiling.
Aspect Ratio Press ◄► to enter and adjust the video aspect ratio.
Keystone Press ◄► to enter and adjust the display keystone.
Digital Zoom Press ◄► to enter and adjust the Digital Zoom menu.
Audio Press (Enter) / ► to enter the Audio menu. See Audio on page 30.
Advanced 1 Press (Enter) / ► to enter the Advanced 1 menu. See Advanced 1 Feature on
page 31.
Advanced 2 Press (Enter) / ► to enter the Advanced 2 menu. See Advanced 2 Feature on
page 33.
— 30 — Audio Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▼▲ to move to the Audio menu and then press Enter or ►. Press ▼▲ to move up and down in the Audio menu. ITEM DESCRIPTION Volume Press ◄► to enter and adjust the audio volume. Mute Press ◄► to enter and turn on or off the speaker.
– 31 –
Advanced 1 Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press
▲▼ to move to the Advanced 1 menu and then press Enter or ►. Press ▲▼ to move up and down
in the Advanced 1 menu. Press ◄► to enter and change values for setting.
ITEM DESCRIPTION
Language Press ◄► to enter and select a different OSD language.
Security Lock Press ◄► to enter and enable or disable the security lock function.
Blank Screen Press ◄► to enter and select a different Blank Screen color.
Splash Logo Press ◄► to enter ~nd select splash logo on or off.
Closed Captioning Press ◄► to enter and enable or disable Closed Captioning.
Keypad Lock Press ◄► to enter and enable or disable the keypad keys.
3D Setting Press EEnter) / ► to enter the 3D menu. See page 32 for more information on 3D
Setting.
Screen Capture Press (Enter) / ► to capture an image of your screen and display it during the next
power-up cycle.
Note:
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD device under the
3D Disc Menu.
— 32 — 3D Setting ITEM DESCRIPTION 3D Press ◄► to enter and select a different 3D mode. 3D Sync Invert Press ◄► to enter and enable or disable 3D Sync Invert. 3D Format Press ◄► to enter and enable or disable different 3D Formats. Note: 1. By default, the 3D OSD menu options will be grayed out until a 3D source is detected. When a 3D source is detected, the menu options will become available. 2. Use 3D glasses to view a 3D image. 3. You need 3D content from a 3D DVD or 3D media file. 4. You need to enable the 3D source (some 3D DVD content may have a 3D On/Off selection feature). 5. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a driver on your PC and connect a USB emitter. 6. Make sure to choose the 3D mode which matches the type of glasses you are using (DLP Link or IR 3D). 7. Power on the glasses. Glasses normally have a power On/Off switch. Follow the configuration instructions which came with your glasses to finish the setup process.
– 33 – Advanced 2 Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Settings 1 menu. Press ▲▼ to move to the Advanced 2 menu and then press Enter or ►. Press ▲▼ to move up and down in the Advanced 2 menu. Press ◄► to enter and change values for setting. ITEM DESCRIPTION Test Pattern Press ◄► to enter and select an internal test pattern. H Image Shift Press ◄► to enter and select H Image Shift. V Image Shift Press ◄► to enter and select V Image Shift.