InFocus Projector IN5110 User Manual

40
Cleaning the dust filter
1Turn off the projector and unplug the power cable. 
2Wait 45 minutes to allow the projector to cool thoroughly.
WARNING : To a
 void burns, allow the projector to cool for at least 45 
minutes before you clean or replace the dust filter
. 
3Remove the dust filter cover on the si de of the projector by pressing up 
on the two tabs at the cover’s bottom. 
4Pull the tab on the center of the blac k dust filter bracket and lift it off.
5Clean the filter, cover, and vent using a...

41
Appendix
Projected image size
NOTE: Visit the Service section of our website for interactive image size cal -
culators for the standard lense.
Table 3: 
Minimum Image Maximum Image
Distance (feet/m)  Diagonal 
Image
( f

eet/m) Image 
Width 
( f
eet/m)  Diagonal 
Image
(feet/m) Image Width 
(f

eet/m)
Min Distance  3/0

.9 not 
supported not 
supported 2.5/0.8
2.1/0.7
5/1.5 not 
supported not 
supported 4.1/1.3
3.5/1.1
6/1.9 2.5/0.8 2.1/0.65.0/1.5 4.2/1.3
10/3.0 4.0/1.2 3.4/1.08.1/2.5 6.8/2.1
15/4.6...

42
Command Control
Serial Communication Configuration
Visit our website for additional RS-232 settings and information.
To control this projector via RS-232, connect a null modem cab
 le and set the 
control system serial port settings  to match the following communication 
configuration: 
RS-232 Port Settings
Setting Value
Bits per second 19,200 
Data bits 8 
Parity None 
Stop bits 1 
Flow control None 
Emulation VT100 
Network Communication Configuration
For network control, you can access th e...

Write Command Examples
FunctionCommand Response 
Brightness (BRT100) Sets the brightness to 100
Power (PWR0) Turns power off 
Power (PWR1) Turns power on
43
Error Conditions
Not all commands are supported for al
l projectors. If an unsupported com-
mand is issued, the command will be ignored. If a command is received that 
is not unde

rstood, a ‘?’ character will be returned indicating the command 
was not understood.
Limitations
The projector cannot respond to commands  coming in at a high-rate....

44
Auto Image
1: enableAIM
Wn/a 1n/a 1
Auto Power*
0: disable; 1: enable APO
RW0 10 1
Auto Source*
0: disable; 1: enable ASC
RW0 11 1
Blank
0: disable; 1: enable BLK
RW0 1 0 1
Blank Screen*
0: black
1: blue 
2: white BSC
RW0 21 1
Brightness* BRT RW96 160128 1
Ceiling*
0: disable; 1: enable CEL
RW0 10 1
Closed Captions*
0: Off
1: On
2: Auto CCD
RW0 20 1
Closed Captions 
Chann
 el*
0: CC1
1: CC2
2: CC3
3: CC4
4: Text1
5: Text2
6: Text3
7: Text4 CCC
RW0 70 1
Color* CLRRW96 160128 1
Color Space*   
0: Auto...

45
Corner Correction- 
Bottom left corner -
V*CN6
RW0 5990 1
Corner Correction- 
Botto
 m right corner -
H* CN7
RW0 9590 1
Corner Correction- 
Botto
 m right corner -
V* CN8
RW0 5990 1
Corner Corr ec
 tion all 
corners Reset*
 0: n/a
 1: enable CNR
RW0 1n/a 1
Source   
0: computer1   
1: computer2   
2: computer 3
3: video 1
4: video 2
5: video 3 SRC
RW0 50 1
Custom Key (Effect)*  
0: Blank   
1: Mute   
2: Aspect ratio   
3: Source   
4: Auto image   
5: Freeze   
6: Magnify  
7: Source Info  
8:...

46
Horizontal Position 
(Split Screen right)HPR
RWDef.
-128 Def.
+128auto
1
Internal Sound 
Enab
 le*
0: disable; 1: enable INT
RW0 11 1
IP Address Byte 1 IP1R0 1192
IP Address Byte 2 IP2R0 1168
IP Address Byte 3 IP3R0 11
IP Address Byte 4 IP4R0 1254
IR Receiver front*  
0: disable; 1: enable IRF
RW0 11 1
IR Receiver rear*  
0: disable; 1: enable IRR
RW0 11 1
IR Receiver top*  
0: disable; 1: enable IRT
RW0 10 1
Language*
0 = English
1 = French
2 = German
3 = Italian 
5 = Korean
6 = Norwegian
7 =...

47
Magnify*MAGRW0 480 1
Magnify Enable*
0: disable; 1: enable MGE
RW0 10 1
Magnify Position Hori -
zontal* MPH
RW0 6432 1
Magnify Position Ver -
tical* MPV
RW0 6432 1
Menu 
0: clear; 1: display MNU
RW0 10 1
Menu Navigation   
0: up key 
1: down key  
4: select key NAV
W0 4n/a 1
Monitor Out Default*
1: Computer 2
2: Computer 3
5: Off MO
D
RW
1 51 1
Mute  
0: disable; 1: enable MTE
RW0 10 1
Network Restart*
1: restart NTR
Wn/a 1n/a 1
Overscan*  
0: disable; 1: enable OVS
RW0 10 1
PC Screen Saver Off*  
0:...

48
Reset Lamp Hours
1: resetLRT
Wn/a 1n/a 1
Ruled Lines*
0: Lines on White
1: Lines on Black
2: Grid on White
3: Grid on Black RLL
RW0 30 1
Ruled Lines Enable
0: disable; 1: enable RLE
RW0 10 1
Save User Presets 1-
3*
1: save US
nW
n/a 1n/a 1
Screen Save*   
0: 5 minutes   
1: 10 minutes   
2: 15 minutes   
3: 20 minutes   
4: 25 minutes   
5: 30 minutes SSV
RW0 50 1
Sharpness*   
5 = Sharpest
6 = Sharper
7 = Standard
8 = Softer
9 = Softest SHP
RW5 9
7 (computer 
and video 1)
6 (video 2 
an

d 3)
1...

49
Source 3*
0: computer 1
1: computer 2
2: computer 3
3: video 1
4: video 2
5: video 3SR3
RW0 53 1
Source 4*
0: computer 1
1: computer 2
2: computer 3
3: video 1
4: video 2
5: video 3 SR4
RW0 54 1
Source Info
1: enable ABT
Wn/a 1n/a 1
Split Screen
0: Disable; 1: Enable SSC
RW0 10 1
Split Screen Main Side
0: Left; 1: Right SSM
RW0 10 1
Split Screen Left 
So
 urce
0: Computer 1
1: Computer 2
2: Computer 3
3: Video 1
4: Video 2
5: Video 3 SSL
RW0 51 1
Split Screen Right 
Source
0: Computer 1
1: Computer 2...