InFocus Projector IN5110 User Manual

Temperature light
20
Lamp won’t turn on, Temp light is lit (page 15)
 
Make sure vents aren’t blocked; allow projector 
to cool for one minute 
startup
screen
Unplug projector; wait 20 minutes; plug in 
projector and turn it on: lamp lights
Lamp light
Lamp won’t turn on, Lamp light is lit ( page 15)Lamp may need to be replaced ( page 38)
startup
screen
Lamp turns on 

21
Still having problems?
If you need assistance, visit our websit
e (www.infocus.com/service) or call us.
This product is backed by a limited warranty. An extended warranty plan may be purchased from your dealer. When sending the pro jector in for repair, we 
recom
 mend shipping the unit in its original packing material, or  having a professional packaging company pack the unit. Please  insure your shipment for its 
full value. Image not centered on screen
Adjust horizontal or vertical position in...

22
Using the keypad buttons
power–turns the projector on ( page 10) and off ( page 15).
menu –opens the on-screen me nus 
 (page  27).
up/down arrows –navigates to and adjusts settin
 gs in the menus (page 27).
select –confirms choices made in the menus ( page 27
 ).
source –switches among active sources 

23
Using the remote control 
The remote uses two (2) AAA batteries (not included). They are easily 
installed by sliding the cover off the remotes back, aligning the + and - ends 
of the batteries, sliding  them into place, and then replacing the cover.
To operate, point the remote at the proj ection scree
 n or at the projector (not 
at the computer). The range of optimum operation is about 16 feet (5m). For 
best results, aim the remote directly at the projector.
To use the laser pointer, press and...

24
Using the audio 
To play sound from the projector, connect your source to an Audio In con-
nector on the projector.
To adjust the volume, mute, or  loud
 ness, use the Audio menu (see page 33).
Troubleshooting audio
If there is no sound, check the following:
• Make sure the audio cable is connected.
• Make sure mute isn’t active. 
• Make sure the volume is turned up enough.
• Make sure you are connected to the corresponding  audio in for your 
sour
 ce. By default, Audio 1  corresponds to Computer 2,...

25
Optimizing computer images
After your computer is connected properly and the computer’s image is on 
the screen, you can optimize the imag e using the onscreen menus. For gen-
eral information on using the menus, see  page 27.
• Adjust the Keystone, Contrast, or  Brightness in the 
 Picture menu. 
• Change the Aspect Ratio. Aspect Rati o is t
 he ratio of the image width to 
image height. Standard TV screens  and older laptops are 4:3; HDTV 
and most DVDs are 16:9; and wide screen computers are 16:10....

26
Optimizing video images
After the video device is connected properly and the image is on the screen, 
you can optimize the image using the onscreen menus. For general informa -
tion on using the menus, see  page 27.
• Adjust the Keystone, Contrast, Brightne ss
 , Color, or Tint in the Picture 
menu. See  page 28. 
• Change the Aspect ratio.  Aspect 
 ratio is the ratio of the image width to 
image height. Standard TV screens  and older laptops are 4:3; HDTV 
and most DVDs are 16:9; and wide screen...

27
Using the menus
To open the menus, press the menu button on the keypad or remote. (The 
menus automatically close after 60 seconds if no buttons are pressed.) The 
Main menu appears. Use the arrow buttons to move up and down to high -
light the desired subm enu, then press the Select button. 
To 
 change a menu setting, highlight it, press  Select, then use
  the up and 
down arrow buttons to adjust the value, select an option using radio but-
tons, or turn the feature on or  off us
 ing check boxes....

28
Picture menu
To adjust the following six settings, highlight the setting, press Select, use 
the up and down arrows to adjust the  values, then press select to confirm 
the changes.
Keystone Vertical : adjusts 
t
 he image vertically and makes a squarer image by 
using an adjustable scale band. 
Keystone Horizontal : adjusts t
 he image horizontally and makes a squarer 
image by using an adjustable scale band.
Corner Correction:  allows you to adjust the corn ers of
  the projected image. 
This is...

29
Presets: Presets are provided that optimize the projector for displaying com-
puter presentations and video images in  di
 fferent lighting conditions and 
on different backgrounds. 
There are also user-definable presets.  To se
 t a preset for the current source, 
adjust the image, select Save Settings in the Presets menu, then select Save 
User Presets 1 (or 2 or 3). You can recall  these settings in the future by select-
ing the User 1 preset. If you select  User Presets 
 then further adjust the...