InFocus Projector IN1126 User Manual

							
User’s Manual 
Adjusting Zoom, Focus and Keystone 
1.  Use the Image-zoom  
control (on the projector 
only) to resize the pro-
jected image and 
screen size 
B. 
2.  Use the Image-focus  
control (on the projector 
only) to sharpen the 
projected image 
A . 
3.  Power
Power Ready
Over Temp
Source
Quick Menu
Auto
Menu
Vo lu me
Freeze
Keystone
Use the Quick Menu
 
button on the projector 
or Keystone  on the 
remote control to cor-
rect trapezoid images 
which are wider on the 
top or bottom. 
 
Remote control and OSD panel 
4.  The keystone control  
appears on the display. 
5.  Press  ◄  or ► to adjust 
keystone.  
 
Note: 
When the OSD menu is off, the  Quick Menu button will cycle through Volume, Keystone, and Digi-
tal Zoom adjustments. 
– 14 –  
						

							
IN1124/IN1126 – User’s Manual 
Adjusting the Volume 
1.  Press the Volume +/-
buttons on the remote 
control or press the 
Quick Menu button on 
the keypad until the 
Volume OSD appears 
on the display. 
Vo l u m e
Freeze
Keystone
 
Power
Power Ready
Over Temp
Source Quick Menu
Auto
Menu 
 
2.  Press
 ◄  or ► to adjust 
volume. 
3.  Press the  MUTE button 
to turn off the audio 
(This feature is only 
available on the re-
mote). 
 
 
Adjusting Digital Zoom 
1.  Press the  Quick Menu  
button on the keypad 
until the Digital Zoom 
OSD appears on the 
display.  
 
2.  Press  ◄ or  ► to zoom 
the image in or out.  
 
   – 15  –  
						

							
User’s Manual 
 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you make image adjustments and change various settings.  
Navigating the OSD 
You can use the remote control curs or buttons or the buttons on the top of the projector to navigate 
and make changes to the OSD. The following illust ration shows the corresponding buttons on the re-
mote control and on the projector. 
 
1 5
Power
Power
Ready
Over Temp
Source Quick Menu
Auto
Menu
34
Vo l u me
Freeze
Source
Keystone
Menu Power
Auto Mute
1
4
2 3
5
2 
 
1.  To enter the OSD, press 
the MENU button.  
2.  There are five menus. 
Press the cursor ◄►  but-
ton to move through the 
menus.  
3. Press the cursor  ▲▼ but-
ton to move up and down 
in a menu.  
4. Press  ◄► to change set-
ting values. 
5. Press  MENU to close the 
OSD or leave a sub 
menu. 
Note: 
Depending on the video source, not all items in  the OSD are available. For example, the Horizon-
tal/Vertical Position  items in the Computer menu can only be modified when connected to a PC. 
Items that are not available cannot  be accessed and are grayed out.  
– 16 –  
						

							
IN1124/IN1126 – User’s Manual 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1. Press the MENU button. Press the cursor  ◄► button to navigate to  Installation I. 
 
2. Press the cursor ▲▼  button until Language is highlighted.  
3. Press the cursor ◄►  button until the language you want is selected.  
4. Press the MENU button to close the OSD.   
   – 17  –  
						

							
User’s Manual 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
 
– 18 –  
						

							
IN1124/IN1126 – User’s Manual 
OSD Sub-Menu Overview 
 
  – 19  –  
						

							
User’s Manual 
Image Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Image 
Menu. Press the cursor  ▲▼ button to move up and down in the  Image menu. Press  ◄► to change 
setting values. 
 
ITEM DESCRIPTION 
Display Mode Press the cursor  ◄► button to set the Display Mode.  
Brilliant Color Press the cursor  ◄► button to adjust the Brilliant Color value. 
Brightness Press the cursor  ◄► button to adjust the display brightness. 
Contrast Press the cursor  ◄► button to adjust the display contrast. 
Sharpness Press the cursor  ◄► button to adjust the display sharpness level. 
Gamma Press the cursor  ◄► button to adjust the gamma correction of the display.  
Press  (Enter) /  ► to enter the Advanced menu. See  Advanced Features on 
page Advanced 21. 
Reset Press  (Enter) / ►  to reset all settings to default values. 
– 20 –  
						

							
IN1124/IN1126 – User’s Manual 
Advanced Features  
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Advanced menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Advanced  menu. 
 
ITEM DESCRIPTION 
Press the cursor ◄► button to adjust the color space.  Color Space  
Press the cursor ◄► button to adjust the color temperature.  Color Temperature  
Press  (Enter) /  ► to enter the Color Manager menu. See page 22 for more infor-
mation on Color Manager  Color Manager.  
   – 21  –  
						

							
User’s Manual 
Color Manager 
 (Enter) / ► to enter the  Color Manager  sub menu.  Press 
 
ITEM DESCRIPTION 
Select to enter the Red Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Red 
Select to enter the Green Color Manager.  
Press the  ◄► buttons to adjust the Hue, Saturation, and Gain. Green 
Select to enter the Blue Color Manager.  
Press the  ◄► buttons to adjust the Hue, Saturation, and Gain. Blue 
Select to enter the Cyan Color Manager.  
Press the  ◄► buttons to adjust the Hue, Saturation, and Gain. Cyan 
Select to enter the Magenta Color Manager.  
Press the  ◄► buttons to adjust the Hue, Saturation, and Gain. Magenta 
Select to enter the Yellow Color Manager.  
Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Yellow 
Select to enter the White Color Manager.  
Press the  ◄► buttons to adjust the Red, Green, and Blue. White 
– 22 –   
						

							
IN1124/IN1126 – User’s Manual 
Computer Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Com-
puter  menu. Press the cursor  ▲▼ button to move up and down in the computer menu. Press  ◄► to 
change setting values. 
 
ITEM DESCRIPTION 
Horizontal Position Press the cursor ◄►  button to adjust the display position left or right.  
Vertical Position Press the cursor ◄► button to adjust the display position up or down.  
Frequency Press the cursor  ◄► button to adjust the A/D sampling clock. 
Tracking Press the cursor  ◄► button to adjust the A/D sampling dot. 
Press  (Enter) /  ► to automatically adjustment for phase, tracking, size and posi-
tion. Auto Image 
 
   – 23  –