Iiyama Prolite E1908wsv User Manual

USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future
reference.
ENGLISHENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
 

ENGLISH
| Servicecard
Dear user, we congratulate you
on the purchase of your iiyama LCD.
iiyama
All iiyama LCD monitors comply with the ISO13406-2 standard for pixel defects. 
For details on warranty and locally used pixel policies that apply directly after installation of your product 
please check the iiyama website.
In case of a defect, please call your local support hotline.
Before reporting the screen defect, please 
prepare the following information/evidence:
| model number *
| purchase receipt...

ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/
EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas,
business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
All places of operation are characterised by their connection to the...

ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY..................................................................................... 1
SAFETY PRECAUTIONS........................................................................ 1
SPECIAL NOTES ON LCD MONITORS.................................................... 3
CUSTOMER SERVICE............................................................................. 3
CLEANING.............................................................................................. 3...

ENGLISH
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any...

ENGLISH
2     FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun
shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed...

ENGLISH
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTEWhen you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture
position to the correct position. „
Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours. In
this case, the screen is recovered slowly by changing...

ENGLISH
4     BEFORE YOU OPERATE THE MONITOR
CAUTION*The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used.
However, all guarantees and warranties are void for any problems or damage
caused by a power cable not supplied by iiyama. „ Power Cable*„ D-Sub Signal Cable
„ Audio  Cable„ Stand (Stand-Arm,Base)
„ User Manual The following accessories are included in your package. Check...

ENGLISH
BEFORE YOU OPERATE THE MONITOR     5
FITTING AND REMOVAL OF BASE
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped. „CAUTION
Do not give a strong impact to the monitor. It may cause damage.
„
Unplug the monitor before installation to avoid electric shock or damage.
„

1.Put a piece of soft cloth on the table
beforehand to prevent the monitor from
beingscratched. Lay the monitor flat on
a table with front face down.
2.Hold the monitor and push...

ENGLISH
6     BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS
APower Switch (     )
BMenu Button (MENU)
C+ Button ( + )
D– Button ( – )
EAuto Button (AUTO)
FPower Indicator
Blue:Normal operation
Orange:Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 2W when receiving no horizontal and/or vertical
sync signal.
GSpeakers
HAC Connector (AC IN)
ID-sub mini 15pin Connector (D-SUB)
JAudio Connector (AUDIO IN)
KKeyhole for Security Lock
You...