Icom Ic_r20 Communications Reciever Instruction Manual
Have a look at the manual Icom Ic_r20 Communications Reciever Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 Icom manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 67
54
10
SET MODE
D D
Dial speed acceleration
The dial speed acceleration automatically speeds up the tun-
ing dial speed when rotating [R-DIAL]rapidly.
•OFF : The dial speed acceleration is turned OFF.
•ON: The dial speed acceleration is tuned ON.
(default)D D
Monitor key actionThe monitor key, [SQL], can be set as a ‘sticky’ key. When
set to the sticky condition, each push of [SQL]toggles the
monitor function ON and OFF.
•PUSH : Pushing and holding [SQL]to monitor the fre-
quency. (default)
•HOLD : Push...](http://img.usermanuals.tech/thumb/2452/82810/w64_icom_r20-wideband-scanner-reciever_manual_d-66.png "Page 67
54
10
SET MODE
D D
Dial speed acceleration
The dial speed acceleration automatically speeds up the tun-
ing dial speed when rotating [R-DIAL]rapidly.
•OFF : The dial speed acceleration is turned OFF.
•ON: The dial speed acceleration is tuned ON.
(default)D D
Monitor key actionThe monitor key, [SQL], can be set as a ‘sticky’ key. When
set to the sticky condition, each push of [SQL]toggles the
monitor function ON and OFF.
•PUSH : Pushing and holding [SQL]to monitor the fre-
quency. (default)
•HOLD : Push...")
![Page 68
55
10
SET MODE
D D
Scan pause timer
Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause time.
•2–20 : Scan pauses for 2–20 sec. on a received signal,
and selected in 2 sec. steps. (default: 10 sec.)
•HOLD : Scan pauses on a received signal until it disap-
pears. Rotate [R-DIAL]to resume manually.
D
D
Scan resume timerSelects scan resume time. Scan resumes after the specified
period when the received signal disappears.
•0: Scan resumes immediately when the...](http://img.usermanuals.tech/thumb/2452/82810/w64_icom_r20-wideband-scanner-reciever_manual_d-67.png "Page 68
55
10
SET MODE
D D
Scan pause timer
Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause time.
•2–20 : Scan pauses for 2–20 sec. on a received signal,
and selected in 2 sec. steps. (default: 10 sec.)
•HOLD : Scan pauses on a received signal until it disap-
pears. Rotate [R-DIAL]to resume manually.
D
D
Scan resume timerSelects scan resume time. Scan resumes after the specified
period when the received signal disappears.
•0: Scan resumes immediately when the...")
![Page 69
56
10
SET MODE
D D
Scope audio output
Sets the audio output function while scope operation.
The scope audio output is used for finding out the signals
while scope function are modulated, unmodulated or beet
signal etc.D D
Offset frequencySets the duplex offset frequency for each frequency band in-
dependently within 0 to 159.99999 MHz range. During duplex
operation (–DUP or +DUP), the monitoring frequency (while
[SQL]is pushed) shifts the set frequency.
The default value may differ according to the...](http://img.usermanuals.tech/thumb/2452/82810/w64_icom_r20-wideband-scanner-reciever_manual_d-68.png "Page 69
56
10
SET MODE
D D
Scope audio output
Sets the audio output function while scope operation.
The scope audio output is used for finding out the signals
while scope function are modulated, unmodulated or beet
signal etc.D D
Offset frequencySets the duplex offset frequency for each frequency band in-
dependently within 0 to 159.99999 MHz range. During duplex
operation (–DUP or +DUP), the monitoring frequency (while
[SQL]is pushed) shifts the set frequency.
The default value may differ according to the...")
![Page 71
58
10
SET MODE
10
D D
Memory bank link Sets the linked bank for the bank-link scan.
(default: All banks are ON)
qRotate [R-DIAL]to select the bank that you want to change
setting.
wPush [8 SET]for 1 sec. to enter the bank link setting con-
dition.
eRotate [R-DIAL]to select the setting, then push [8 SET].
rRotate [R-DIAL]to select next bank and repeat qto e, or
push [DUALWATCH]to exit set mode.
D
D
LCD contrastThe LCD contrast can be adjusted through 15 levels.D D
Weather alert functionTurns weather alert...](http://img.usermanuals.tech/thumb/2452/82810/w64_icom_r20-wideband-scanner-reciever_manual_d-70.png "Page 71
58
10
SET MODE
10
D D
Memory bank link Sets the linked bank for the bank-link scan.
(default: All banks are ON)
qRotate [R-DIAL]to select the bank that you want to change
setting.
wPush [8 SET]for 1 sec. to enter the bank link setting con-
dition.
eRotate [R-DIAL]to select the setting, then push [8 SET].
rRotate [R-DIAL]to select next bank and repeat qto e, or
push [DUALWATCH]to exit set mode.
D
D
LCD contrastThe LCD contrast can be adjusted through 15 levels.D D
Weather alert functionTurns weather alert...")
![Page 73
60
11
OTHER FUNCTIONS
■Antenna selectionThe IC-R20 has an internal bar antenna installed for receiving
AM broadcast band
(0.495–1.620 MHz; differ according to version)
signals. In addition, the connected earphone’s cable can be
used as an antenna for receiving FM broadcast band(76.000–107.995 MHz; differ according to version)
signals.
D D
Selecting antennaqPush [8 SET]for 1 sec. to enter set mode.
wRotate [R-DIAL]to select “AM ANTENNA” or “FM AN-
TENNA” for AM broadcast band or FM broadcast band, re-...](http://img.usermanuals.tech/thumb/2452/82810/w64_icom_r20-wideband-scanner-reciever_manual_d-72.png "Page 73
60
11
OTHER FUNCTIONS
■Antenna selectionThe IC-R20 has an internal bar antenna installed for receiving
AM broadcast band
(0.495–1.620 MHz; differ according to version)
signals. In addition, the connected earphone’s cable can be
used as an antenna for receiving FM broadcast band(76.000–107.995 MHz; differ according to version)
signals.
D D
Selecting antennaqPush [8 SET]for 1 sec. to enter set mode.
wRotate [R-DIAL]to select “AM ANTENNA” or “FM AN-
TENNA” for AM broadcast band or FM broadcast band, re-...")
![Page 74
61
11
OTHER FUNCTIONS
D D
Weather channel selection
qPush [MR S.MW]several times to select the weather chan-
nel group.
wRotate [R-DIAL]to select the desired weather channel.
ePush [VFO MHz]to return to VFO mode, or push [MR
S.MW]to select other mode to exit the weather channel.D
D
Weather alert functionNOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the selected weather channel is moni-
tored each 5 sec. for the...](http://img.usermanuals.tech/thumb/2452/82810/w64_icom_r20-wideband-scanner-reciever_manual_d-73.png "Page 74
61
11
OTHER FUNCTIONS
D D
Weather channel selection
qPush [MR S.MW]several times to select the weather chan-
nel group.
wRotate [R-DIAL]to select the desired weather channel.
ePush [VFO MHz]to return to VFO mode, or push [MR
S.MW]to select other mode to exit the weather channel.D
D
Weather alert functionNOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the selected weather channel is moni-
tored each 5 sec. for the...")
58 10 SET MODE 10 D D Memory bank link Sets the linked bank for the bank-link scan. (default: All banks are ON) qRotate [R-DIAL]to select the bank that you want to change setting. wPush [8 SET]for 1 sec. to enter the bank link setting con- dition. eRotate [R-DIAL]to select the setting, then push [8 SET]. rRotate [R-DIAL]to select next bank and repeat qto e, or push [DUALWATCH]to exit set mode. D D LCD contrastThe LCD contrast can be adjusted through 15 levels.D D Weather alert functionTurns weather alert function ON and OFF. WX-ALERT -ON >OFF ---------------- WX-ALERT >ON -OFF ---------------- Weather alert OFF Weather alert ON U.S.A. version only LCD-CONTRAST LCD-CONTRASTMinimum levelMaximum level BANK-A -ON >OFF ---------------- BANK-A >ON -OFF ---------------- When OFF is selected When ON is selected BANK-A -ON >OFF ----------------BANK-A >ON -OFF ---------------- BANK-LINK -BANK-B:ON >BANK-A:ON ---------------- -BANK-D:ON -BANK-C:ON -BANK-F:ON -BANK-E:ON
59 10 SET MODE D D CI-V address To distinguish equipment, each CI-V transceiver/receiver has its own Icom standard address in hexadecimal code. The IC- R20’s address is “6C.” When 2 or more IC-R20s are connected to an optional CT-17CI-VLEVEL CONVERTOR , set a different address for each IC- R20 in the range “01” to “7F.” (default: 6C) D D CI-V baud rateSets the data transfer rate. When “AUTO” is selected, baud rate is automatically set according to the connected controller or other Icom CI-V radio. (default: AUTO) D D CI-V transceiveCI-V transceive operation is possible with the IC-R20 con- nected to an Icom CI-V radio. When “ON” is selected, chang- ing the frequency, operating mode, etc. on the IC-R20 automatically changes those of connected radios and vice versa. (default: ON) CI-V-TRANSCEIVECI-V-TRANSCEIVE -ON >OFF ---------------- >ON -OFF ---------------- CI-V transceive OFF CI-V transceive ON CI-V-BAUD-RATE -1200bps -300bps -9600bps -4800bps -19200bps >AUTO-1200bps -300bps >9600bps -4800bps -19200bps -AUTO ----------------CI-V-BAUD-RATE ----------------“AUTO” baud rate setting 9600 bps settingCI-V-ADDRESS -6C ---------------- CI-V-ADDRESS -01 ---------------- CI-V address set to 6C CI-V address set to 01
60 11 OTHER FUNCTIONS ■Antenna selectionThe IC-R20 has an internal bar antenna installed for receiving AM broadcast band (0.495–1.620 MHz; differ according to version) signals. In addition, the connected earphone’s cable can be used as an antenna for receiving FM broadcast band(76.000–107.995 MHz; differ according to version) signals. D D Selecting antennaqPush [8 SET]for 1 sec. to enter set mode. wRotate [R-DIAL]to select “AM ANTENNA” or “FM AN- TENNA” for AM broadcast band or FM broadcast band, re- spectively.eAfter pushing [8 SET], rotate [R-DIAL]to select “BAR” when “AM ANTENNA” is selected for the AM broadcast band; select “EARPHONE” when “FM ANTENNA” is se- lected for the FM broadcast band. rPush [DUALWATCH]to exit set mode. NOTES: •Some noise or spurious may be received when the inter- nal bar or earphone cable is used for antenna. •The supplied or third party’s antenna MUST BEcon- nected to the antenna connector to receive signals other than AM or FM broadcast bands. •When receiving an AM broadcast signal with internal bar antenna, aim the receiver to better audio direction. •When the internal bar or earphone cable is used for an antenna, the attenuator function cannot be used. >BAR -EXT ---------------- AM-ANTENNA >EARPHONE -EXT ---------------- FM-ANTENNA Bar antenna selection for 0.495–1.620 MHz bandEarphone cable selection for 76.000–107.995 MHz band ***-SET-MODE-*** -BAR >EXT ----------------AM-ANTENNA -SET-EXPAND -FM-ANTENNA >AM-ANTENNA -AF-FILTER -ANL -NOISE-BLANKER ---------------- [R-DIAL]DUALWATCHSET8 1011
61 11 OTHER FUNCTIONS D D Weather channel selection qPush [MR S.MW]several times to select the weather chan- nel group. wRotate [R-DIAL]to select the desired weather channel. ePush [VFO MHz]to return to VFO mode, or push [MR S.MW]to select other mode to exit the weather channel.D D Weather alert functionNOAA broadcast stations transmit weather alert tones before important weather announcements. When the weather alert function is turned ON, the selected weather channel is moni- tored each 5 sec. for the announcement. When the alert signal is detected, the “ALT” and the “WX” indications are displayed alternately and sounds a beep tone until the receiver is oper- ated. The previously selected (used) weather channel is checked periodically during standby or while scanning. qSelect the desired weather channel. wTurn the weather alert function ON in set mode. ➥Push [8 SET]for 1 sec. to enter set mode. ➥Rotate [R-DIAL]to select “WX ALERT,” then push [8 SET]. Rotate [R-DIAL]to select “ON.” ➥Push [DUALWATCH]to exit set mode. eSet the desired stand-by condition. •Select VFO or memory channel. •Scan or priority watch operation can also be selected. rWhen the alert is detected, a beep sounds and the follow- ing indication will be displayed. tTurn the weather alert function OFF in set mode. √MODE ANLAFC TSQL FM PSKIP -DUP WX √MODE ANLAFC TSQL FM PSKIP -DUP ALT 11 “WX” and “ALT” alternate. √MODE ANLAFC TSQL FM1 PSKIP -DUP WX Weather channel indication [R-DIAL] MR S.MWVFO MHz ■Weather channel operation U.S.A. version only
62 11 OTHER FUNCTIONS ■Data cloningCloning allows you to quickly and easily transfer the pro- grammed contents from a personal computer to a receiver using the optional CS-R20 CLONING SOFTWARE . DCloning using a personal computerData can be cloned to and from a personal computer (Mi- crosoft ®Windows ®98/Me/2000/XP) using the optional CS- R20 CLONING SOFTWARE and the optional OPC-1382 CLONING CABLE . Consult the CS-R20 CLONING SOFTWARE HELPfile for details.•The receiver shows following indications. CLONE-OUT CLONE CLONE-IN √MODE ANLAFC TSQL FM 146010 PSKIP -DUP During cloning During cloningAfter cloning After cloning Read from receiver Write to receiver IC-R20 PC to USB port OPC-1382 to USB jack Push to turn power ON. Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. 11 The USB driver that is included in the CS-R20 CD must be installed before using the optional CS-R20 (see p. 81 DRIVER INSTALLATION for details). Also cloning opera- tion is required initial setup for your receiver’s version.
63 11 OTHER FUNCTIONS DCloning error NOTE: DO NOTpush any key on the receiver during cloning. This will cause a cloning error. When the display appears as below, a cloning error has oc- curred. In such a case, the receiver automatically performs ALL RESET while turning power OFF and ON. ■Auto power-off functionThe IC-R20 can be set to automatically turn OFF after a spec- ified period in which no operation is performed. BUSY, 120 min., 90 min., 60 min., 30 min. and OFF can be specified. The specified period is retained even when the re- ceiver is turned OFF by the auto power-off function. To cancel the function, select “OFF” in step ebelow. qPush [8 SET]for 1 sec. to enter set mode. wRotate [R-DIAL]to select “AUTO POWER OFF,” then push [8 SET].•Turn the expanded set mode ON for selection. (p. 49)eRotate [R-DIAL]to select the desired time or to turn the function OFF, then push [8 SET]. rPush [DUALWATCH]to exit set mode. ***-SET-MODE-*** -SCAN-PAUSE >AUTO-POWER-OFF -MONITOR ----------------AUTO-POWER-OFF >BUSY -120MIN -90MIN -60MIN -30MIN -OFF ---------------- [R-DIAL]DUALWATCHSET8 INEXPANDED SET MODE √MODE ANLAFC TSQL FM 146010 PSKIP -DUPALL-RESETCLONE-ERROR Turn power OFF, then ON
64 11 OTHER FUNCTIONS ■IC recorderThe IC-R20 has an IC recorder of up to 32 tracks. The maxi- mum recording length is about 260 minutes.D D Recording a received audioqPush [REC]momentarily to start recording. •Red LED below the [REC]lights ON. wPush [REC]to pause to record or push [■ ≈ ≈]to stop recording. •While pausing the red LED blinks. D D Playing back recorded contentqPush [ Ω ΩΩ Ω ATT]/[ ≈ ≈≈ ≈ RF GAIN]to select the desired track. •The track number appears. wPush [■ ≈ ≈]momentarily to start playing the content back. ePush [ Ω ΩΩ Ω ATT]when you want to rewind; or [ ≈ ≈≈ ≈ RF GAIN]when you want to fast forward while playing back. rPush [■ ≈ ≈]to stop playing back. •Even you don’t push [■ ≈ ≈], the receiver stops automatically and returns to normal condition at the end of the track. VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 --------------- 8 1 VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 --------------- 8 1 VOL√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP TRACK:06 TRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 ---------------VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1 √MODE ANLAFC TSQL FM 145 780 PSKIP -DUP VOLTRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 --------------- VOL√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP TRACK:06 TRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 ---------------VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1 √MODE ANLAFC TSQL FM 145 780 PSKIP -DUP Track number Played time Playback speedRecorded time Recorded quality Volume level TRACK:06√MODE ANLAFC TSQL FM 145780 PSKIP -DUP VOL√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP TRACK:06 TRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 ---------------VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1 √MODE ANLAFC TSQL FM 145 780 PSKIP -DUP ATTRF GAIN IC Recorder REC The track number appears RECTRACK:01√MODE ANLAFC TSQL FM 145780 PSKIP -DUP√RECSTOP REC VOL√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUPTRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 ---------------VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1 Red LED Rest of recording time bar appears • While recording • While Pausing • When stop to record 11
65 11 OTHER FUNCTIONS • Playback speed settingThe playback speed can be selected from 5 speeds. qPush [■ ≈ ≈]for 1 sec. to enter the playback speed set mode. wRotate [R-DIAL]to select the desired playback speed, then push [■ ≈ ≈]. •x x0 0. .5 50 0 : Playback the recorded content at half speed. •x x0 0. .7 75 5 : Playback the recorded content at three quar- ters speed. •x x1 1. .0 00 0 : Playback the recorded content at normal speed. (default) •x x1 1. .2 25 5 : Playback the recorded content at 1.25 times speed. •x x1 1. .5 50 0 : Playback the recorded content at 1.5 times speed. D D Recording set mode • Quality settingqPush [REC]for 1 sec. to enter the recording set mode. wRotate [R-DIAL]to select “QUALITY,” then push [REC]. eRotate [R-DIAL]to select the recording quality, then push [REC]. rPush [DUALWATCH]to exit the recording set mode. NOTE: The IC recorder can store 32 tracks at the maxi- mum. When the 32nd track is recorded, the recording func- tion is not available even if recording time is left. At this time delete all recorded contents (see the next page) or transfer the recorded contents to PC using optional CS- R20 CLONING SOFTWARE . *****-REC--***** -REC-REMOTE >QUALITY -ALL-DELETE ---------------- QUALITY -NORMAL >LONG-TIME -FINE ---------------- VOL√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP TRACK:06 TRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 ---------------VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1 √MODE ANLAFC TSQL FM 145 780 PSKIP -DUP PLAYBACK-SPEED -x0.75 -x0.50 -x1.25 >x1.00 -x1.50 ---------------- VOL√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP TRACK:06 TRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 ---------------VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1 √MODE ANLAFC TSQL FM 145 780 PSKIP -DUP SelectionRecording Recording Time Quality (Approx.) LONG TIME Low 260 min. NORMAL Normal 130 min. FINE High 65 min.
66 11 OTHER FUNCTIONS 11 • Automatic recordingThe IC-R20 has an automatic recording function. When this function is activated, the receiver will record automatically when a receiving signal appears and pause when the signal disappears. This function is very useful when you want to store an uncontinuous signal. qPush [REC]for 1 sec. to enter the recording set mode. wRotate [R-DIAL]to select “REC REMOTE,” then push [REC]. eRotate [R-DIAL]to select the setting, then push [REC]. rPush [DUALWATCH]to exit the recording set mode. tPush [REC]to activate. NOTE: Before using this function, verify the squelch set- ting as close level when no signal is received. Otherwise this function will not pause even when signal disappears. • Erasing recorded audio NOTE: The IC recorder can erase all the tracks at the same time, but cannot erase each track independently. Only using the optional CS-R20 CLONING SOFTWARE can store the recorded audio into a PC or erase independently. qPush [REC]for 1 sec. to enter the recording set mode. wRotate [R-DIAL]to select “ALL DELETE,” then push [REC]. eRotate [R-DIAL]to select “YES” if you want to delete all tracks, then push [REC]. •After deleting, the receiver returns to normal operating mode.NOTE: The optional CS-R20 can perform the storing the recorded contents into PC, erasing them independently or editing their information. The CS-R20 cannot playback the stored contents on the PC. The recorded contents can be played back on the IC-R20 only.*****-REC--***** -REC-REMOTE -QUALITY >ALL-DELETE ----------------ALL-DELETE >YES -NO ---------------- VOL√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP TRACK:06 TRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 ---------------VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1 √MODE ANLAFC TSQL FM 145 780 PSKIP -DUP *****-REC--***** >REC-REMOTE -QUALITY -ALL-DELETE ----------------REC-REMOTE >ON -OFF ---------------- VOL√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM REC 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP√MODE ANLAFC TSQL FM STOP 145 780 PSKIP -DUP TRACK:06 TRACK:01 NORMAL --------------- 0:00:32/0:12:14 x1.00 ---------------VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1VOLTRACK:01 NORMAL --------------- 0:00:30/0:12:14 x1.00 ---------------8 1 √MODE ANLAFC TSQL FM 145 780 PSKIP -DUP
67 11 OTHER FUNCTIONS ■Partial resetIf you want to initialize the operating conditions (VFO fre- quency, VFO settings, set mode contents) without clearing the memory contents, a partial resetting function is available for the receiver. ➥While pushing [VFO MHz], turn the power ON to partially reset the receiver. ■All resetThe function display may occasionally display erroneous in- formation (e.g. when first applying power). This may be caused externally by static electricity or by other factors. If this problem occurs, turn power OFF. After waiting for a few seconds, turn power ON again. If the problem persists, per- form the following procedure.•Partial resetting is also available. See left for details. IMPORTANT!:Resetting the receiver (All reset) CLEARS all memory in- formation and initializes all values in the receiver, includ- ing TV channel skip setting. ➥While pushing [VFO MHz]and [MR S.MW], turn the power ON to reset the CPU.DIAL.SEL SWEEP CENTER T-SCAN SKIP M.N TONE SET TS ATTRF GAIN IC Recorder 123 4560 789BANDDUALWATCH MAIN/SUB POWER VFO MHzMODE SCANMR S.MW SCOPE LOCK RECAFC √MODE ANLAFC TSQL FM 146010 PSKIP -DUPALL-RESET*The appearing frqeuency is different according to the receiver version. VFO MHzMR S.MWPOWER AT POWER ON DIAL.SEL SWEEP CENTER T-SCAN SKIP M.N TONE SET TS ATTRF GAIN IC Recorder 123 4560 789BANDDUALWATCH MAIN/SUB POWER VFO MHzMODE SCANMR S.MW SCOPE LOCK RECAFC √MODE ANLAFC TSQL FM 146010 PSKIP -DUP *The appearing frqeuency is different according to re- ceiver version. VFO MHzPOWER AT POWER ON