IBM Thinkpad X30 X31 Manual

Product overview
This section presents the following product-unique
information:
v“Specifications”
v“Status indicators for X30”on page 50
v“FRU tests”on page 55
v“Fn key combinations”on page 56
Specifications
Feature Description
ProcessorX30 series
vMobile Intel
®Pentium®III processor 1.06
GHz - M, L2 512 KB cache
vMobile Intel
®Pentium®III processor 1.2
GHz - M, L2 512 KB cache
X31 series
vIntel
®Pentium®M processor 1.3 GHz, L2
512 KB cache
vIntel
®Pentium®M processor 1.4 GHz, L2
512 KB cache
Memory...

Feature Description
Bus architecturevHUB link
vPCI bus
vLPC bus
Graphic memoryX30 series
MAX 32 MB DVMT (Dynamic Video Memory
Technology)
X31 series
16 MB Local Video Memory
CMOS RAMv242 bytes
Hard-disk drivev20.0 GB, 2.5-inch, IDE interface
v40.0 GB, 2.5-inch, IDE interface
Displayv12.1-inch, 16M colors, XGA (1024×768
resolution) TFT color LCD
I/O port (system)vExternal monitor connector
vRJ11
vRJ45
vParallel connector
vStereo headphone jack
vMonaural microphone jack
vStereo line-in jack
vUniversal...

Feature Description
PC CardvOne Type-II
CompactFlash
cardvOne Type-II
Ultrabay device Ultrabay Plus (supported by UltraBase X3)
Diskette drive
(external)v1.44 MB (3-mode), 3.5-inch diskette drive
Communication
daughter card
(CDC)vV.90 modem daughter card (MDC) (some
models)
vBluetooth daughter card (BDC) (some
models)
vIBM Integrated Bluetooth with 56K
Modem (BMDC) (some models)
AC adapterv56-watt type
Battery pack
(main)v6-cell Li-Ion battery pack (4.4 AH)
Preinstalled
operating systemWindows 2000...

Status indicators for X30
The system status indicators show the status of the
computer, as follows:
132
824567
9
123
Indicator Meaning

1Bluetooth
status
Green:The Bluetooth is operational. This
indicator is on when the Bluetooth is
on and not in suspend mode.
(continued)
Product overview
50ThinkPad X30, X31 (MT 2672/2673) 

Indicator Meaning

2Battery
status
Green:The battery is in use and has enough
power. The ac adapter has charged
the battery completely.
Blinking green:
The battery is being charged, but still
has enough power to operate. (At
regular intervals, the indicator light
turns off briefly.)
Orange:The battery is being charged, but the
battery power is still low.
Blinking orange:
The battery needs to be charged.
When the indicator starts blinking
orange, the computer beeps three
times.

3Standby
status...

Indicator Meaning

9Ethernet
status
Green:The computer connects to a LAN and
a session with the network is
available.
Blinking yellow:
Data is being transmitted. Product overview
52ThinkPad X30, X31 (MT 2672/2673) 

Status indicators for X31
The system status indicators show the status of the
computer, as follows:
2431
82567
9
1
34
Indicator Meaning

1Bluetooth
status
Green:The Bluetooth is operational. This
indicator is on when the Bluetooth is
on and not in suspend mode.

2Wireless
status
Green:
Wireless is operational and radio on state.
This indicator is on when the data is
transmitted.
(continued)
Product overview
ThinkPad X30, X3153 

Indicator Meaning

3Battery
status
Green:The battery is in use and has enough
power. The ac adapter has charged
the battery completely.
Blinking green:
The battery is being charged, but still
has enough power to operate. (At
regular intervals, the indicator light
turns off briefly.)
Orange:The battery is being charged, but the
battery power is still low.
Blinking orange:
The battery needs to be charged.
When the indicator starts blinking
orange, the computer beeps three
times.

4Standby
status...

FRU tests
The following table shows the test for each FRU.
FRU Applicable test
System board 1.Diagnostics-->CPU/Coprocessor
2.Diagnostics-->Systemboard
PowerDiagnostics-->Other Devices-->IBM AC
Adapter,IBM Battery 1 (IBM Battery 2)
LCD unit 1.Diagnostics-->Video Adapter
2.Interactive Tests-->Video
Modem, MDC
or BMDC1. Make sure the modem is set up correctly.
2. Replace the modem jack and the modem
card in turn, and run the following test in
Diagnostics-->Communication:
a. Lucent Soft Modem Loopback
b....

FRU Applicable test
Memory 1. If two DIMMs are installed, remove one of
them and runDiagnostics-->Memory
Test - Quick.
2. If the problem does not recur, return the
DIMM to its place, remove the other one,
and run the test again.
3. If the test does not detect the error, run
Diagnostics-->Memory Test - Full.
Fan 1. Turn on the computer and check the air
turbulence at the louver near the power
switch.
2. RunDiagnostics-->Other Devices-->
IBM Fan.
Fn key combinations
The following table shows the function...