Home > IBM > Notebook > IBM Thinkpad A22m Wireless Models Manual

IBM Thinkpad A22m Wireless Models Manual

    Download as PDF Print this page Share this page

    Have a look at the manual IBM Thinkpad A22m Wireless Models Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 60 IBM manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							1140 PC Card slot assembly
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 58
    v“1050 Hard-disk drive or RF ID adapter”on page 64
    v“1060 Ultrabay 2000 device”on page 66
    v“1070 Dummy card”on page 68
    v“1080 Keyboard”on page 69
    v“1090 Keyboard CRU insulator”on page 72
    v“1100 Hinge cover and clear sheet icon”on page 73
    v“1110 Keyboard bezel and speaker”on page 74
    v“1130 Wireless PC Card and sub card”on page 78
    1
    2
    Step Screw (quantity) Torque
    1M2.0×9.5 mm, nylon-coated (2) 0.245 Nm
    (2.5 kgfcm) Removing and replacing a FRU
    ThinkPad A22m wireless models87 
    						
    							When installing:
    Before installing the new PC card slot assembly, do the
    following.
    1. Pull the release button cover of the upper slot out with
    your fingers as shown in the figure below.
    2. Push both of the upper and the lower release buttons
    into each slot.
    Removing and replacing a FRU
    88ThinkPad A22m wireless models 
    						
    							1150 Fan assembly
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 58
    v“1050 Hard-disk drive or RF ID adapter”on page 64
    v“1060 Ultrabay 2000 device”on page 66
    v“1080 Keyboard”on page 69
    v“1090 Keyboard CRU insulator”on page 72
    v“1100 Hinge cover and clear sheet icon”on page 73
    v“1110 Keyboard bezel and speaker”on page 74
    1
    Step Screw (quantity) Torque
    1M2.5×4.8 mm, nylon-coated (1) 0.392 Nm
    (4 kgfcm)
    (continued)
    Removing and replacing a FRU
    ThinkPad A22m wireless models89 
    						
    							3
    22
    2
    Step Screw (quantity) Torque
    2M2.5×4.8 mm, nylon-coated (5) 0.392 Nm
    (4 kgfcm)
    When installing:Apply thermal grease on thea-part of
    the fan assembly as in this figure.
    a
    Removing and replacing a FRU
    90ThinkPad A22m wireless models 
    						
    							1160 Diskette drive
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 58
    v“1050 Hard-disk drive or RF ID adapter”on page 64
    v“1060 Ultrabay 2000 device”on page 66
    v“1080 Keyboard”on page 69
    v“1090 Keyboard CRU insulator”on page 72
    v“1100 Hinge cover and clear sheet icon”on page 73
    v“1110 Keyboard bezel and speaker”on page 74
    v“1120 Speaker cable”on page 77
    1
    Step Screw (quantity) Torque
    1M2.5×4.8 mm, nylon-coated (1) 0.392 Nm
    (4 kgfcm)
    2
    Step Screw (quantity) Torque
    2M2.5×4.8 mm, nylon-coated (3) 0.392 Nm
    (4 kgfcm)
    (continued)
    Removing and replacing a FRU
    ThinkPad A22m wireless models91 
    						
    							3
    8
    a
    6
    67
    5
    4
    4
    Step Screw (quantity) Torque
    3M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm)
    4M2.5×15 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm)
    When installing:Do not press the part of the diskette
    drive markeda. To do so could
    damage the drive.
    Removing and replacing a FRU
    92ThinkPad A22m wireless models 
    						
    							1170 Upper shield
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 58
    v“1050 Hard-disk drive or RF ID adapter”on page 64
    v“1060 Ultrabay 2000 device”on page 66
    v“1070 Dummy card”on page 68
    v“1080 Keyboard”on page 69
    v“1090 Keyboard CRU insulator”on page 72
    v“1100 Hinge cover and clear sheet icon”on page 73
    v“1110 Keyboard bezel and speaker”on page 74
    v“1120 Speaker cable”on page 77
    v“1130 Wireless PC Card and sub card”on page 78
    v“1140 PC Card slot assembly”on page 87
    v“1150 Fan assembly”on page 89
    v“1160 Diskette drive”on page 91
    12
    3
    2
    Step Screw (quantity) Torque
    1M2.5×15 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm)
    2M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm) Removing and replacing a FRU
    ThinkPad A22m wireless models93 
    						
    							1180 TV card
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 58
    v“1050 Hard-disk drive or RF ID adapter”on page 64
    v“1060 Ultrabay 2000 device”on page 66
    v“1070 Dummy card”on page 68
    v“1080 Keyboard”on page 69
    v“1090 Keyboard CRU insulator”on page 72
    v“1100 Hinge cover and clear sheet icon”on page 73
    v“1110 Keyboard bezel and speaker”on page 74
    v“1120 Speaker cable”on page 77
    v“1130 Wireless PC Card and sub card”on page 78
    v“1140 PC Card slot assembly”on page 87
    v“1150 Fan assembly”on page 89
    v“1160 Diskette drive”on page 91
    v“1170 Upper shield”on page 93
    Cable routing:When reinstalling the modem cable, route
    it as in this figure.
    Removing and replacing a FRU
    94ThinkPad A22m wireless models 
    						
    							1190 CPU socket and CPU
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 58
    v“1020 DIMM”on page 59
    v“1050 Hard-disk drive or RF ID adapter”on page 64
    v“1060 Ultrabay 2000 device”on page 66
    v“1070 Dummy card”on page 68
    v“1080 Keyboard”on page 69
    v“1090 Keyboard CRU insulator”on page 72
    v“1100 Hinge cover and clear sheet icon”on page 73
    v“1110 Keyboard bezel and speaker”on page 74
    v“1120 Speaker cable”on page 77
    v“1130 Wireless PC Card and sub card”on page 78
    v“1140 PC Card slot assembly”on page 87
    v“1150 Fan assembly”on page 89
    v“1160 Diskette drive”on page 91
    v“1170 Upper shield”on page 93
    1a
    2
    3
    c
    b
    A
    Rotate the screw head (A) 180°in the direction of the
    arrowato release the lock; then remove the CPU.
    Step Screw (quantity) Torque
    1M2.5×15 mm, nylon-coated (3) 0.392 Nm
    (4 kgfcm)
    When installing the CPU, do as shown in the figure.
    vRotate the screw head (A) 180°in the direction of the
    arrowbto lock the CPU.
    vWhen attaching the CPU to the socket, do as shown in
    stepc.
    Removing and replacing a FRU
    ThinkPad A22m wireless models95 
    						
    							1200 System board and RJ45/11
    connector assembly
    For access, remove these FRUs, in order:
    v“1010 Battery pack”on page 58
    v“1020 DIMM”on page 59
    v“1030 Mini PCI adapter”on page 61
    v“1040 Backup battery”on page 63
    v“1050 Hard-disk drive or RF ID adapter”on page 64
    v“1060 Ultrabay 2000 device”on page 66
    v“1070 Dummy card”on page 68
    v“1080 Keyboard”on page 69
    v“1090 Keyboard CRU insulator”on page 72
    v“1100 Hinge cover and clear sheet icon”on page 73
    v“1110 Keyboard bezel and speaker”on page 74
    v“1120 Speaker cable”on page 77
    v“1130 Wireless PC Card and sub card”on page 78
    v“1140 PC Card slot assembly”on page 87
    v“1150 Fan assembly”on page 89
    v“1160 Diskette drive”on page 91
    v“1170 Upper shield”on page 93
    v“1180 TV card”on page 94
    v“1190 CPU socket and CPU”on page 95
    1
    1
    2
    Step Screw (quantity) Torque
    1M2.5×4.8 mm, nylon-coated (2) 0.392 Nm
    (4 kgfcm)
    (continued)
    Removing and replacing a FRU
    96ThinkPad A22m wireless models 
    						
    All IBM manuals Comments (0)

    Related Manuals for IBM Thinkpad A22m Wireless Models Manual