Hyundai H Ledvd24v2 Instruction Manual

							ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
С ЖИДКОКРИСТАЛЛИЧЕСКИМ  ЭКРАНОМ И ВСТРОЕННЫМDVD-ПРОИГРЫВАТЕЛЕМ
LED TV WITH BUILT-IN DVD 
PLAYER
Руководство по эксплуатации 
Instruction manual
H-LEDVD24V2
 
						

							Repeat
Display
Goto
Intro playback
Audio/Language
Subtitle
Angle
Zoom
Repeat A-B
USB/SD/MMC operation
DVD setting System setup
Language setup
Audio setup
Digital setup
General information
Troubleshooting Causes of interference
Accessories
Specifications
Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Stand installation
Wall mounting
Connection
Connection
Outdoor antenna connection
Other connections
Operation
Control elements  Front, top and lateral panel
 Back panel
Remote controller Changing the battery
General operations  AV signal sources
 Teletext operations
 PC screen
OSD operation Picture setting
Sound setting
TV Setting
Function setting
 PC setup
DVD player operation Turn on/off
Insert disc
Play the disc
Menu playback
Title playback
Program playback
Track selection
Previous/Next
Forward/Backward
Slow motion
Pause
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
4
4
5
5
5
5
6
6
6
6
7
7
8
8
8
8
9
9
9
9
10
10
10
10
10
11
11
11
11
11
11
12
12
1212
12
12
12
12
12
12
13
13
13
13
14
14
14
15
16
16
16
17
18
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
•  Before connecting the AC power cord 
to the DC adapter outlet, make sure that 
the voltage designation of the DC adapter 
corresponds to the local electrical supply.
•  Accessories include a DC adaptor KPA-
060F. Do not use other adaptors with this unit.
•  Please unplug the power cord from the AC 
outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally.
•  This unit should only be connected to a 
wall socket having grounding. •  Always disconnect the power cord and 
antenna during a storm. •  Do not fix the power cord with a metal nail.
•  Unplug the power cord from the AC outlet; 
also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time. •  When unplugging the plug, always hold 
the wide slot, do not touch the metal part, and 
do not destroy, refit, twist, pull or roast the 
power cord. •  Please contact the service center 
immediately if you found that the core is  showed in the air or has been broken.
•  Please replace the AC outlet if the metal 
bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen. •  Never touch the antenna lie or power plug 
if it stars to thunder. •  Do not touch the power plug with wet 
hands. •  Do not use any non-rated power socket 
with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat. •  All instructions must be read and 
understood well before you operate the unit. 
Heed all warnings and follow all instructions. •  Please use the accessories provided 
by the manufacturer. Using inadequate 
accessories may result in accidents. •  Please adjust the product through the 
panel buttons or the remote controller, do 
not remove the cover or attempt to service 
the product by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock. •  Over-press the panel may destroy the 
product. •  Do not place the product on an unstable 
cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product. 
Downloaded From TV-Manual.com Manual” 
						

							4
Before you start
•  Please place the product on a flat surface 
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20
0C ~500C; 
otherwise you may destroy the product.  •  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.
•  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire. •  Do not place the unit into closed space 
of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at list 10cm at 
above, left, and right of the TV. •  Please place all the signal cords behind of 
rear panel. •  Do not overexert or touch the panel when 
you convey the product. Do not transfer the TV 
up or down display direction. •  Do not transport it with the power cord 
or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown. •  2 persons or more shall transport the 
device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it. •  The temperature of the product’s body 
becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch.
Stand installationInsert the fixer in the bottom of the unit body 
into the hole of the stand. Rotate the stand 
clockwise until a click to lock it in place.
Wall mountingFor wall mounting the back panel of this 
unit is equipped with 4 screw holes (4 mm 
diameter, 100 mm horizontal spreadistance 
x 100 mm vertical spread distance). A 
wall-mount bracket should be used for wall 
mounting (bracket is not included and should 
be acquired separately). Manufacturer is not 
responsible for improper mounting resulting in 
damage of the unit.
All images provided herein are schematic 
drawings of real objects and may differ 
from their real images.
 
						

							5
Сonnection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the composite 
video jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable. •  Insert the power cord to the DC adaptor, 
then connect the adaptor to the power socket 
of the unit. •  When using the LCD as a computer 
screen, connect the PC to the VGA jack from 
the monitor by the relevant cable.
Connection
•  This unit has PC audio in jack. Connect 
this jack to PC main unit with related audio 
cable in PC mode and adjust the volume to 
what you want. •  If the video source has a HDMI output 
jack, you can connect the signal to the monitor 
by the HDMI cable. •  Component input Y/Pb/Pr is intended for 
receiving component video signal if connected 
to the component output of external signal 
source.
•  Connect your headphones or earphones 
(not included) to the headphone socket of 
this unit. When earphones are connected, the 
sound output through the built-in speakers of 
this unit is mute. •  If the video source has a Coaxial input 
jack, you can connect the signal source to the 
coaxial output of the unit by related cable.
75 Ohm co-axis cable
TV RF antenna jack
Antenna cable connector
Downloaded From TV-Manual.com Manual” 
						

							6
Operation
Control elements    
Front, lateral and top panel
 
              1. MENU button
              2. CH+/CH- buttons
              3. VOL+/VOL- buttons
              4. INPUT button               
              5. PLAY button
              6. EJECT button
              7. POWER button
              8. Disc slot
              9. IR sensor
            10. Power indicator
Back panel
1. TV RF antenna socket
2. Stereo audio input
3. Composite video input
4. Component (YPbPr) input
5. SD/MMC slot
6. USB port
7. Power socket
8. HDMI input
9. VGA input
10. PC audio input
11. SCART connector
12. Headphone output
13. Coaxial digital audio output
12 3456 7
8
9
10
1
2
3
4
5 67 8910 11 1213
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  PICTURE button
4.  SOUND button
5.  VOL+/VOL- buttons
6.  MUTE button
7.  EXIT button8.  OK button/cursor buttons (
///)
9.  button
10.  button
11. REPEAT button
12. ZOOM/ASPECT button
13. GOTO/HOLD button
14. SLOW/TV/TEXT button
15. INTRO/INDEX button
16. PROGRAM/SUBPAGE button
17. 
/ button
18. INPUT button
19. 
 button
20. DISPLAY button
21. SLEEP button
22. CH+/CH- buttons
23. OSD MENU button
24. 
 button
25. SETUP button
26. A-B button
27. MENU button
28. SUBTITLE button
29. LANGUAGE/NICAM/A2 button
30. ANGLE/SIZE button
31. TITLE/REVEAL button
32. 
/ buttons
Changing the battery1.  Remove the battery compartment cover 
on the back of the RC. 2.  Insert the batteries into the battery 
compartment making sure that the correct 
polarity is observed. 3.  Install the cover back.
•  Use two AAA batteries for the RC. The RC 
should be pointed at remote sensor within 8 
meters and within 30 degrees at the left or the 
right side. •  Take the battery out of the RC if it is not 
used for a long time. Do not mix new and used 
batteries or different types of batteries. Weak 
batteries can leak and severely damage the RC. •  Do not expose the RC to shock, liquids, and 
do not place it in an area with high humidity.
1
2
3
4
5
6
7
8
9
10 25 24 23 22 21 20 19 18
11 26
12 27
13 28
14 29
15 30
16 31
17 32
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power, the indication light 
will be in green color. Press POWER button 
again to switch the unit to standby mode, and 
the light will be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume. •  Press SLEEP button repeatedly to set the 
sleep time. •  Press INPUT button on the RC to select 
the TV function mode. Channel ‘1’ will appear 
on the right top corner after channel searching 
is completed. Press CH-/CH+ buttons to select 
previous or next channels; or press number 
buttons to enter a channel number directly; 
or press [-/--] button until the screen displays 
‘-’ or ‘--’, then use number buttons to enter a 
channel number from 1 to 199.
•  Press 
 button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press PICTURE button repeatedly to cycle 
through the available video picture modes from 
the following 4 types: User => Normal => Soft 
=> Vivid. •  Press SOUND button repeatedly to cycle 
through the available sound modes from the 
following 4 types: User => Normal => News => 
Movie. •  Press MUTE button to cut off sound, press 
this button again or adjust volume to resume 
sound. •  Press DISPLAY button to display the 
preset TV channel play information. •  Press ZOOM/ASPECT button repeatedly 
to select a screen display size from the 
available list: 16:9/4:3.
AV signal sourcesPress INPUT button on the RC, then 
press / cursor buttons or CH+/
CH- buttons on the panel to cycle through 
the available source list as follows: TV - AV - 
YPbPr - DVD - SCART - VGA - HDMI. Press 
 
cursor button to confirm.
TELETEXT operations (option)Select TV channel in order to pick up the 
picture signal of Teletext. Teletext button 
functions are as follows: TV/TEXT: Press TV/TEXT button to enter 
into TEXT mode. Press this button again to 
return to the channel you are watching. HOLD: Press this button to stop the move 
to the next page. Press this button again to 
cancel operation. INDEX: Press this button to go to page 100.
SIZE: Press this button to enlarge the text 
shown on the teletext screen, and one half of 
page could be shown.  Press this button again to view the second 
half of this page.  Press this button third time to normal size 
text page view. REVEAL: Press this button to reveal the 
cancelled information. Press this button again 
to cancel the information. SUBPAGE: Press this button to select 
subpage. Enter the number of sub page and use 
numeric buttons in the format 0001 for sub page 
1. The teletext will search for the sub page. Red/Green/Yellow/Blue buttons: Press 
these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.
PC screenSelect the VGA input mode. The unit has a 
VGA jack for a normal computer. Connect the 
monitor to a PC by this jack and the unit can 
be used as the monitor for the PC.
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
OSD operation
Press OSD MENU button on the RC to enter 
the OSD menu. Use / buttons to 
select a setting page displayed on the screen. 
Press 
 button to go the page. Press / buttons to select the needed item, then 
use 
/ buttons to select available setting or 
to adjust the selected item. Press OK button to 
confirm. After setting, press OSD MENU button to 
return to the root menu or press EXIT button to 
exit menu setting.
Picture setting
Move Select Exit
Picture mode
Brightness
Contrast
Saturation
Sharpness
Hue
Scale
Picture
•  Picture Mode: User/Normal/Soft/Vivid.
•  Brightness
•  Contrast
•  Saturation
•  Sharpness
•  Hue: adjust the tint of color when your 
system is in NTSC. •  Scale: select 16:9/4:3 picture mode.
  In PC mode only brightness and 
contrast are adjustable.
Sound setting
Move Select Exit
Sound mode
Volume
Bass
Treble
Balance
Sound
•  Sound Mode: User/Normal/News/Movie.
•  Volume
•  Bass
•  Treble
•  Balance: adjust output between left and 
right speakers.
TV setting (only in TV mode)
Move Select Exit
Auto tune
Manual tune
Fine tune
Skip
Sound sys
Channel swap
TV
•  Auto tune: enter into auto tuning menu. 
Then press 
 button to start auto tuning. When 
it finds a station it will automatically store this 
in first location and move to the next. When 
auto tuning is completed, the TV will show the 
first station found. You can stop the auto tuning 
proces by pressing OSD MENU button. •  Manual tune: this item allows you to 
select preset channel’s frequency one by one 
Downloaded From TV-Manual.com Manual” 
						

							10
Operation
with / buttons.
•  Fine tune: perform fine adjustment of the 
current frequency. •  Skip: select On/Off. When set On, the 
corresponding channel will be skipped while 
listing channels up/down. •  Sound system: select the sound system.
•  Channel swap: Press 
 button to 
go to swap menu. Under CHANNEL1 and 
CHANNEL2 select channel numbers you 
want to swap, then press 
 button to confirm 
operation.
Function setting
Move Select Exit
Language
Blue back
TTX language
Color temp.
Reset
Function
•  Language: select the OSD language.
•  Blue Back: select On/Off. Selecting On 
means the screen background colour could be 
in blue if there is no or weak signal (only in TV 
mode). •  TTX language: select the area of teletext 
language. •  Color temperature: Cool/Warm/Normal/
User.  •  Reset: Press 
 button to reset all settings. 
PC Setup (only in VGA mode)
Move
Select Exit
H-Position
V-Position
Clock
Phase
Auto adjust
PC
•  H-Position/V-Position: adjust horizontal 
and vertical position of the image. •  Clock: adjust the image frequency 
manually. •  Phase: adjust the phase manually. 
•  Auto adjust: automatical setting of the 
parameters. 
  In this manual, the OSD Menu maybe 
changed and different from your real TV’s 
screen without further notice. This manual is 
just a sample to help you how to operate menu 
setting.
DVD player operation
Turn on and off the DVD function
Turn on the LCD TV and then select DVD 
source.
Insert disc to DVDInsert the disc to the disc slot, the player 
will load the disc automatically. There will be 
indication “READ” on screen. After loading 
the disc content, it will switch to play mode 
automatically.
  •  Insert disc with reflective data side 
facing the front of the unit. When inserting the 
disc incorrectly, you may damage the DVD 
Downloaded From TV-Manual.com Manual”