Hyundai H Ledvd24v2 Instruction Manual

ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
С ЖИДКОКРИСТАЛЛИЧЕСКИМ  ЭКРАНОМ И ВСТРОЕННЫМDVD-ПРОИГРЫВАТЕЛЕМ
LED TV WITH BUILT-IN DVD 
PLAYER
Руководство по эксплуатации 
Instruction manual
H-LEDVD24V2
 

Repeat
Display
Goto
Intro playback
Audio/Language
Subtitle
Angle
Zoom
Repeat A-B
USB/SD/MMC operation
DVD setting System setup
Language setup
Audio setup
Digital setup
General information
Troubleshooting Causes of interference
Accessories
Specifications
Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Stand installation
Wall mounting
Connection
Connection
Outdoor antenna connection
Other connections
Operation
Control elements  Front, top and lateral panel
 Back panel...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
•  Please place the product on a flat surface 
in a well-ventilated location. Keep it away from 
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20
0C ~500C; 
otherwise you may destroy the product.  •  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on...

5
Сonnection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the composite 
video jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable. •  Insert the power cord...

6
Operation
Control elements    
Front, lateral and top panel
 
              1. MENU button
              2. CH+/CH- buttons
              3. VOL+/VOL- buttons
              4. INPUT button               
              5. PLAY button
              6. EJECT button
              7. POWER button
              8. Disc slot
              9. IR sensor
            10. Power indicator
Back panel
1. TV RF antenna socket
2. Stereo audio input
3. Composite video input
4. Component (YPbPr) input
5. SD/MMC slot
6....

7
Operation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  PICTURE button
4.  SOUND button
5.  VOL+/VOL- buttons
6.  MUTE button
7.  EXIT button8.  OK button/cursor buttons (
///)
9.  button
10.  button
11. REPEAT button
12. ZOOM/ASPECT button
13. GOTO/HOLD button
14. SLOW/TV/TEXT button
15. INTRO/INDEX button
16. PROGRAM/SUBPAGE button
17. 
/ button
18. INPUT button
19. 
 button
20. DISPLAY button
21. SLEEP button
22. CH+/CH- buttons
23. OSD MENU button
24. 
 button
25. SETUP button
26....

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power, the indication light 
will be in green color. Press POWER button 
again to switch the unit to standby mode, and 
the light will be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch on it again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+...

89
OperationOperation
OSD operation
Press OSD MENU button on the RC to enter 
the OSD menu. Use / buttons to 
select a setting page displayed on the screen. 
Press 
 button to go the page. Press / buttons to select the needed item, then 
use 
/ buttons to select available setting or 
to adjust the selected item. Press OK button to 
confirm. After setting, press OSD MENU button to 
return to the root menu or press EXIT button to 
exit menu setting.
Picture setting
Move Select Exit
Picture mode
Brightness...

10
Operation
with / buttons.
•  Fine tune: perform fine adjustment of the 
current frequency. •  Skip: select On/Off. When set On, the 
corresponding channel will be skipped while 
listing channels up/down. •  Sound system: select the sound system.
•  Channel swap: Press 
 button to 
go to swap menu. Under CHANNEL1 and 
CHANNEL2 select channel numbers you 
want to swap, then press 
 button to confirm 
operation.
Function setting
Move Select Exit
Language
Blue back
TTX language
Color temp.
Reset
Function...