Hyundai H Led3202 Instruction Manual

							ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ
LED TV
Руководство по эксплуатации 
Instruction manual
H-LED3202
 
						

							Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Accessories
Connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front and lateral panel
 Back panel
Remote controller Changing the battery
General operations  AV signal sources
 Teletext operations
 PC screen
OSD operation Channel setting
Picture setting
Sound setting
Time setting
 Option setting
USB operation Turn on USB mode
Photo playback
Music playback
Video playback
Text playback
General information
Troubleshooting Causes of interference
Specifications
2 3
Table of contentsBefore you start
Dear customer!Thank you for purchasing our product. For safety, it is strongly recommended to read 
this manual carefully before connecting, operating and/or adjusting the product and keep 
the manual for reference in the future.
2
3
3
3
4
5
5
5
5
6
6
6
6
7
7
8
8
8
8
9
9
10
10
10
11
11
11
11
12
12
13
14
14
14
15
Downloaded From TV-Manual.com Manual” 
						

							23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects on the environment and human 
health.
Utilization of the product
Important safeguards
•  Before connecting the unit to the power 
source, make sure that the voltage designation 
of the unit corresponds to the local electrical 
supply.
•  Please unplug the power cord from the AC 
outlet and contact a service center for repair 
if following occurs: any obvious abnormality 
appears in the unit, such as smoky, peculiar 
smell or strange sound; liquid has been spilled or 
other objects have fallen into the unit; no picture 
or sound; cover or panel is broken; although you 
have operated the unit following the operating 
instructions, it still cannot work normally. •  This unit should only be connected to a 
wall socket having grounding.
•  Always disconnect the power cord and 
antenna during a storm. •  Do not fix the power cord with a metal nail.
•  Unplug the power cord from the AC outlet; 
also unplug the signal cables from the input 
ports when the unit is unused for long periods 
of time. •  When unplugging the plug, always hold 
the wide slot, do not touch the metal part, and 
do not destroy, refit, twist, pull or roast the 
power cord.
•  Please contact the service center 
immediately if you found that the core is 
showed in the air or has been broken. •  Please replace the AC outlet if the metal  bolt cannot be inserted into the power socket 
completely or it cannot be fastened even when 
it was pushed in, otherwise, any accidents of 
shocks and fires would happen.
•  Never touch the antenna lie or power plug 
if it stars to thunder. •  Do not touch the power plug with wet 
hands. •  Do not use any non-rated power socket 
with numerous devices jointed on one power 
socket or cable device. The wire of non-
designated capacity may cause the fire due to 
the generation of heat. •  All instructions must be read and 
understood well before you operate the unit. 
Heed all warnings and follow all instructions. •  Please use the accessories provided 
by the manufacturer. Using inadequate 
accessories may result in accidents. •  Please adjust the product through the 
panel buttons or the remote controller, do 
not remove the cover or attempt to service 
the product by yourself. Do not disassemble 
back cover and do not make maintenance by 
yourself to avoid the electric shock. •  Over-press the panel may destroy the 
product. •  Do not place the product on an unstable 
cart, stand surface, tripod, bracket, or table. 
The product may fall, causing serious accidents 
as well as the damage to the product.  •  Please place the product on a flat surface 
in a well-ventilated location. Keep it away from 
Downloaded From TV-Manual.com Manual” 
						

							4
Before you start
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20
0C ~500C; 
otherwise you may destroy the product.  •  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be observed 
deterioration of the picture by electromagnetic 
radiation in electromagnetic environment.
•  Fasten the wheel of the product or shelf 
with wheels when installing this product. If it 
moves or is tipped over, it may be damaged. •  Do not place any fire source such as 
candlelight close to this product or place it on 
this product. If it is tipped over or fallen down, it 
may cause damage or fire. •  Do not place the unit into closed space 
of TV for better ventilation; it can reduce the 
product lifetime. Keep a space at list 10cm at 
above, left, and right of the TV. •  Please place all the signal cords behind of 
rear panel. •  Do not overexert or touch the panel when 
you convey the product. Do not transfer the 
LCD TV up or down display direction. •  Do not transport it with the power cord 
or the connection cable connected. If you 
move this product with the power cord or the 
connection cable connected, the damaged 
power cord, connection cable or connection 
terminal may cause the fire, the electric shock 
or breakdown. •  2 persons or more shall transport the 
device, which is heavier than 18 kg. If you drop 
or tip over the device, it may damage it. •  The temperature of the product’s body 
becomes a little higher after a long period use. 
This phenomenon indicates that heat exchange 
in normal working mode, thus please do not 
let children or anyone who is sensitive of 
temperature to touch. All images provided herein are schematic 
drawings of real objects and may differ 
from their real images.
Accessories
1.  LED TV      1 pc
2.  Remote controller    1 pc 
3.  Mini YPbPr cable    1 pc
4.  Mini AV cable      1 pc
5.  Stand installation sheet    1 pc
6.  Screw M4 x 14      5 pcs
7.  Stand        1 pc
8.  Batteries ААА 1,5 V    2 pcs
9.  Consumer information    1 pc
10.  Warranty card      1 pc
11.  Instruction manual    1 pc
Downloaded From TV-Manual.com Manual” 
						

							5
Сonnection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the composite 
video jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable. •  When using the LCD as a computer 
screen, connect the PC to the VGA jack from 
the monitor by the relevant cable. •  This unit has PC audio in jack. Connect 
this jack to PC main unit with related audio 
cable in PC mode and adjust the volume to 
Connection
what you want. •  If the video source has a HDMI output 
jack, you can connect the signal to the monitor 
by the HDMI cable. •  Mini component video input YPbPr is 
intended for receiving component video signal 
if connected to the component output of 
external signal source with the cable included. 
To receive audio signal use the Mini AV input.
•  Connect your headphones or earphones 
(not included) to the headphone socket of 
this unit. When earphones are connected, the 
sound output through the built-in speakers of 
this unit is mute. •  If the video source has a сoaxial input 
jack, you can connect the signal source to the 
coaxial input of the unit by related cable.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
Downloaded From TV-Manual.com Manual” 
						

							6
Operation
Control elements    
Front and lateral panel
 
              1. INPUT button
              2. MENU button
              3. CH+ button
              4. CH- button               
              5. VOL+ button
              6. VOL- button
              7. IR sensor
              8. POWER button
              9. Power indicator
Back panel
1. HDMI1/HDMI2/HDMI3 inputs
2. SCART connector
3. VGA input
4. USB port
5. Coaxial digital audio output
6. Headphone output
7. TVRF antenna socket
8. Mini AV input
9. Mini YPbPR input
10. Left audio input
11. Right audio input
12. Composite video input
13. PC audio input
1 2 34
5
6
7
8
9
10
11
12
13
SCART
1
2
3
4
5
6
8 7
9
Downloaded From TV-Manual.com Manual” 
						

							7
Operation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  PICTURE button
4.  SOUND button
5.  VOL+/VOL- buttons
6.  MUTE button
7.  EXIT button8.  OK button/cursor buttons (
///)
9.  button
10.  button
11. FAV/REPEAT button
12. ZOOM/ASPECT button
13. STEP/HOLD button
14. SLOW/TV/TEXT button
15. 
/INDEX button
16. /SUBPAGE button
17. Red button
18. Green button
19. INPUT button
20. 
 button
21. DISPLAY button
22. SLEEP button
23. CH+/CH- buttons
24. MENU button
25. 
 button
26. GOTO button
27. FAV+/A-B button
28. FAV-/ROOT button
29. SUBTITLE button
30. NICAM/A2 button
31. SIZE/
 button
32. REVEAL/ button
33. Blue button
34. Yellow button
Changing the battery1.  Remove the battery compartment cover 
on the back of the RC. 2.  Insert two AAA batteries into the battery 
compartment making sure that the correct 
polarity is observed. 3.  Install the cover back.
•  The RC should be pointed at remote 
sensor within 8 meters and within 30 degrees 
at the left or the right side. •  Take the battery out of the RC if it is not 
used for a long time. Do not mix new and used 
batteries or different types of batteries. Weak 
batteries can leak and severely damage the RC. •  Do not expose the RC to shock, liquids, 
and do not place it in an area with high humidity.
1
2
3
4
5
6
7
8
9
10 26 25 24 23 22 21 20 19
11 27
12 28
13 29
14 30
15 31
16 32
17
18 33
34
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power, the indication light 
will be in green color. Press POWER button 
again to switch the unit to standby mode, and 
the light will be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch it on again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+ button repeatedly to 
increase the volume. •  Press SLEEP button repeatedly to set the 
sleep time. •  In TV mode press CH-/CH+ buttons to 
select previous or next channels; or press 
number buttons to enter a channel number 
directly; or press [-/--] button until the screen 
displays ‘-’ or ‘--’, then use number buttons to 
enter a channel number from 1 to 199.
•  Press 
 button on the RC to select 
from the present channel and the previously 
displayed channel. •  Press PICTURE button repeatedly to cycle 
through the available video picture modes from 
the following 4 types: Standard => Dynamic => 
User => Mild. •  Press SOUND button repeatedly to cycle 
through the available sound modes from the 
following 5 types: Standard => Music => Movie 
=> Sports => User. •  Press MUTE button to cut off sound, press 
this button again or adjust volume to resume 
the sound. •  Press DISPLAY button to display the 
preset TV channel play information. •  Press ZOOM/ASPECT button repeatedly 
to select a screen display size from the 
available list. Available aspects may differ for 
different signal sources.
AV signal sourcesPress INPUT button, then press / cursor buttons or CH+/CH- buttons on  the panel to cycle through the available source 
list as follows: TV - AV1 - AV2 - SCART - Mini 
YPbPR - HDMI1 - HDMI2 - HDMI3 - PC - 
Media. Press OK button on the RC to confirm.
TELETEXT operations (option)Select TV channel in order to pick up the 
picture signal of Teletext. Teletext button 
functions are as follows: TV/TEXT: Press TV/TEXT button to enter 
into TEXT mode. Press this button again to 
return to the channel you are watching. HOLD: Press this button to stop the move 
to the next page. Press this button again to 
cancel operation. INDEX: Press this button to go to index page.
SIZE: Press this button to enlarge the text 
shown on the teletext screen, and one half of 
page could be shown. Press this button again 
to view the second half of this page. Press this 
button third time to normal size text page view. REVEAL: Press this button to reveal the 
cancelled information. Press this button again 
to cancel the information. SUBPAGE: Press this button to select 
subpage. Enter the number of sub page and use 
numeric buttons in the format 0001 for sub page 
1. The teletext will search for the sub page. Red/Green/Yellow/Blue buttons: Press 
these 4 color buttons to access directly to 
corresponding color page displayed at the 
lower parts of teletext screen.
PC screenSelect PC input mode. The unit has a VGA 
jack for a normal computer. Connect the 
monitor to a PC by this jack and the unit can 
be used as the monitor for the PC.
OSD operation
Press MENU button to enter the OSD menu. 
Use / buttons to select a setting 
page displayed on the screen. Press 
 button 
to go the page. Press / buttons to 
Downloaded From TV-Manual.com Manual” 
						

							89
OperationOperation
select the needed item, then use / buttons 
to select available setting or to adjust the 
selected item. Press OK button to confirm. After setting, press MENU button to return 
to the root menu or press EXIT button to exit 
menu setting.
Channel setting
CHANNEL Auto Tuning
ATV Manual Tuning
Programme Edit
Move
Menu OKexit
•  Auto tuning: enter the auto tuning menu. 
Press OK button to start automatic tuning. To 
exit the process, press MENU or EXIT button. •  ATV Manual tuning: press OK button to 
enter Manual Tuning menu:
Menu
Current CH  ATV Manual Tuning
Color system
Sound system
Fine-tune
AFC
Search
Color system: select PAL/AUTO.
Sound system: select I/BG/DK.
Fine tune: press / buttons to perform 
fine adjustment of the current frequency. AFC: set automatic frequency control on/off.
Search: press 
/ buttons to perform 
manual search. •  Programme edit: press OK button to 
enter Programme edit menu:
Menu
Fav
Rename
Delete MoveSkip
OK
Programme Edit
1 C-04
2 S-44
3 S-05
4 C-05
5 S-09
6 S-10
7 C-06
Delete: select a channel, then press Red 
button on the RC to delete the channel. Rename: select a channel, then press Green 
button on the RC. Press cursor buttons to enter 
the name of the channel. Move: select a channel, then press Yellow 
button on the RC. Press 
/ buttons 
to change the position of the selected channel. 
Press Yellow button again to confirm. Skip: select a channel, then press Blue 
button to lable the channel. Now this channel 
will be skipped when you list through channels 
with CH+/CH- buttons.
  You can press FAV button on the RC to 
display the favorite channel list; press FAV+/
FAV- buttons to navigate in the favorite list.
Downloaded From TV-Manual.com Manual” 
						

							10
Operation
Picture setting
PICTUREPicture mode
Contrast
Brightness
Color
Tint
Sharpness
Color temperature
Noise reduction
Move
Menu OKexit
•  Picture Mode: Standard/Dynamic/User/
Mild •  Contrast (available if User picture mode 
is selected) •  Brightness (available if User picture mode 
is selected) •  Color (available if User picture mode is 
selected) •  Tint (available in NTSC mode only)
•  Sharpness (available if User picture mode 
is selected) •  Color temperature: select Medium/Cool/
Warm. •  Noise reduction: select Off/Low/Middle/
High.
Sound setting
SOUND Sound mode
Treble
Bass
Balance
Auto volume
SPDIF mode
Move
Menu OKexit
•  Sound Mode: Standard/Music/Movie/
Sports/User. •  Treble (available if User sound mode is 
selected) •  Bass (available if User sound mode is 
selected) •  Balance: adjust output between left and 
right speakers. •  Auto volume: set ON/OFF automatic 
control of volume. •  SPDIF mode: select when the unit 
connected through coaxial out.
Time setting
TIME Sleep Timer
Auto Sleep
OSD Timer
Move
Menu OKexit
•  Sleep timer: set time until automatical 
switch-off: 10 min/20 min/30 min/60 min/90 
min/120 min/180 min/240 min/off. •  Auto sleep: select time after which the 
unit will automatically turn off if no action was 
done: 3H/4H/5H. •  OSD timer: select the time of OSD display 
on the screen.
Downloaded From TV-Manual.com Manual”