Hyundai H Led3202 Instruction Manual

ТЕЛЕВИЗОР
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ЖИДКОКРИСТАЛЛИЧЕСКИЙ
LED TV
Руководство по эксплуатации 
Instruction manual
H-LED3202
 

Table of contents 
Before you start 
Utilization of the product 
Important safeguards
Accessories
Connection
ConnectionOutdoor antenna connection
Other connections
Operation
Control elements  Front and lateral panel
 Back panel
Remote controller Changing the battery
General operations  AV signal sources
 Teletext operations
 PC screen
OSD operation Channel setting
Picture setting
Sound setting
Time setting
 Option setting
USB operation Turn on USB mode
Photo playback
Music playback
Video playback
Text...

23
Table of contentsBefore you start
If you want to dispose this product, do not mix it with general household waste. There is 
a separate collection system for used electronic products in accordance with legislation 
that requires proper treatment, recovery and recycling. Please contact your local authorities for the correct method of disposal. By doing so, 
you will ensure that your disposed product undergoes the necessar y treatment, recovery 
and recycling and thus prevent potential negative effects...

4
Before you start
the burning-light, direct sunlight, vibration, 
high-temperature and humidity. Store the 
product with a temperature from –20
0C ~500C; 
otherwise you may destroy the product.  •  Do not place any vase, potted plant, cup, 
medicine and any container with water on this 
product. If the liquid is spilt, it may cause the 
fire, electric shock or breakdown. •  Do not install it at the place on the strong 
magnetic field or current field. It may cause 
break down. This equipment may be...

5
Сonnection
Outdoor Antenna ConnectionUse 75Ω coaxial cable plug or 300-75Ω 
impedance converter to plug in antenna input 
terminal on the rear of the cabinet.
Other connections•  Connect the audio sources (Including 
DVD, VCDR, CAMCORDER and PC) to the 
proper stereo audio input jacks ‘L’ and ‘R’. •  Connect the video source to the composite 
video jack by RCA cable. •  If the video source has a SCART output 
jack, you can connect the signal to the monitor 
by the SCART cable. •  When using the LCD as...

6
Operation
Control elements    
Front and lateral panel
 
              1. INPUT button
              2. MENU button
              3. CH+ button
              4. CH- button               
              5. VOL+ button
              6. VOL- button
              7. IR sensor
              8. POWER button
              9. Power indicator
Back panel
1. HDMI1/HDMI2/HDMI3 inputs
2. SCART connector
3. VGA input
4. USB port
5. Coaxial digital audio output
6. Headphone output
7. TVRF antenna socket
8. Mini AV...

7
Operation
Remote controller (RC)
1.  POWER button
2.  Number buttons
3.  PICTURE button
4.  SOUND button
5.  VOL+/VOL- buttons
6.  MUTE button
7.  EXIT button8.  OK button/cursor buttons (
///)
9.  button
10.  button
11. FAV/REPEAT button
12. ZOOM/ASPECT button
13. STEP/HOLD button
14. SLOW/TV/TEXT button
15. 
/INDEX button
16. /SUBPAGE button
17. Red button
18. Green button
19. INPUT button
20. 
 button
21. DISPLAY button
22. SLEEP button
23. CH+/CH- buttons
24. MENU button
25. 
 button
26. GOTO...

89
OperationOperation
General operations
•  Press POWER button on the unit or on the 
RC to switch on the power, the indication light 
will be in green color. Press POWER button 
again to switch the unit to standby mode, and 
the light will be in red color. •  The picture setup, sound setup, previous 
channel can be memorized before you switch 
off the unit. The unit will restart under the 
previous state when you switch it on again. •  Press VOL- button repeatedly to decrease 
the volume; press VOL+...

89
OperationOperation
select the needed item, then use / buttons 
to select available setting or to adjust the 
selected item. Press OK button to confirm. After setting, press MENU button to return 
to the root menu or press EXIT button to exit 
menu setting.
Channel setting
CHANNEL Auto Tuning
ATV Manual Tuning
Programme Edit
Move
Menu OKexit
•  Auto tuning: enter the auto tuning menu. 
Press OK button to start automatic tuning. To 
exit the process, press MENU or EXIT button. •  ATV Manual tuning:...

10
Operation
Picture setting
PICTUREPicture mode
Contrast
Brightness
Color
Tint
Sharpness
Color temperature
Noise reduction
Move
Menu OKexit
•  Picture Mode: Standard/Dynamic/User/
Mild •  Contrast (available if User picture mode 
is selected) •  Brightness (available if User picture mode 
is selected) •  Color (available if User picture mode is 
selected) •  Tint (available in NTSC mode only)
•  Sharpness (available if User picture mode 
is selected) •  Color temperature: select Medium/Cool/
Warm. •...