Huawei E352s 5 Manual

10 
Using Your LTE E8372 with a computer as a USB modem 
(Connection scenario 1) 
The procedure for installing the device management software may vary depending on your computers operating system. The following instructions are specific to Windows 7 OS. 
Co n n ect i n g t o a  N e t w or k 
1.  Connect the LTE E8372 to one of your computers USB ports.  
   

11 
The drivers are installed automatically in the background.  2.  When the installation is complete, the LTE E8372s device management web page (http://huawei.setup or http://192.168.8.1) is displayed and the LTE E8372 connects to the LTE network automatically.  Note:  If the driver installation does not run automatically, find the AutoRun.exe file in the driver path, and double-click the file to run it.   The default user name and password of the device management web page are admin. It is...

12 
 If you cannot access http://huawei.setup or http://192.168.8.1, disconnect other network connections, such as an Ethernet or Wi-Fi connection, remove and then re-insert the LTE E8372, or restart the computer. 
D i s con n e ct in g  f r om  a  N et w o r k 
Before you remove the LTE E8372, make sure that the data connection has been disconnected Unplug the LTE E8372 from your computer or disconnect the LTE E8372s data connection through the device management web page at http://huawei.setup or...

13 
Using the LTE E8372 as a Wi-Fi hotspot connected to your 
computer 
(Connection scenario 2) 
To manage your LTE E8372’s Wi-Fi functions, login to the device management web page at http://huawei.setup or http://192.168.8.1 to configure the Wi-Fi functions. 
Se t t in g  U p  a  W i-F i  Co n n ect i on 
1.  Insert LTE E8372 into computer (or power adapter).. 2.  Ensure that the LTE E8372s Wi-Fi function is on. The Wi-Fi indicator light should be on. 3.  Search for Wi-Fi from your Wi-Fi device or...

14 
wireless network adapter can be used. Otherwise, verify that your wireless network adapter is working properly. 6.  Wait until a wireless network connection icon is displayed in the lower right corner of the computer screen. A wireless network connection is set up.  
A cce s s in g  t h e In t er n e t 
You can access the Internet after a connection between your LTE E8372 and Wi-Fi device is set up.   Note:  By default, the LTE E8372 automatically disconnects from the Internet when you are roaming.  

15 
Using the LTE E8372 with a Power Adapter 
(Connection scenario 3) 
Connect the LTE E8372 to the power adapters USB port, and connect the power adapter to a power outlet.  
 Note:   The power adapter is not included in the product package. Only use a USB power   

16 
adapter rated 5V with a minimum output current of 750mA as marked on the power adapter.   Use of a power adapter not matching the recommended specifications may cause the LTE E8372 to malfunction, fail, or could even cause a fire. Such use voids all warranties, on the product, whether expressed or implied. Please refer to the enclosed warranty card for additional information on your warranty.  

17 
E x am pl e  1 : Con n e ct in g  a  Gam e Con s o l e (f or  e x am pl e , P S P ) t h r ou g h  W i-Fi 
1.  On the PSP, turn on the WLAN. 2.  Choose Settings > Network Settings. 3.  Select Infrastructure Mode. 4.  Select New Connection, and enter the connection name. 5.  Select Scan to search for wireless networks. A list of access points will be displayed on the screen. 6.  Select the access point with the LTE E8372s SSID, and press the ► button on the PSP. Confirm the SSID, and enter the correct...

18 
7.  Press the ► button to proceed to the next step, and then press the X button to save settings. 8.  Select Test Connection to test whether the network connection is successful. 9.  You can now open the browser and access the network. 
  

19 
E x am pl e  2 : Con n e ct in g  a  Ta bl et  Com p u t er  (fo r  ex am p l e, iP ad ) t h r ou g h  W i-Fi 
1.  Touch Settings > WLAN to turn on WLAN. 2.  The tablet computer automatically searches for wireless connections and displays a list of access points. 3.  Select the access point with the LTE E8372s SSID. 4.  If required, enter the correct wireless network encryption key, and tap Join. (The lock icon indicates that the encryption key is required to connect to this wireless network.)