Huawei E352s 5 Manual

							10 
Using Your LTE E8372 with a computer as a USB modem 
(Connection scenario 1) 
The procedure for installing the device management software may vary depending on your computers operating system. The following instructions are specific to Windows 7 OS. 
Co n n ect i n g t o a  N e t w or k 
1.  Connect the LTE E8372 to one of your computers USB ports.  
   
						

							11 
The drivers are installed automatically in the background.  2.  When the installation is complete, the LTE E8372s device management web page (http://huawei.setup or http://192.168.8.1) is displayed and the LTE E8372 connects to the LTE network automatically.  Note:  If the driver installation does not run automatically, find the AutoRun.exe file in the driver path, and double-click the file to run it.   The default user name and password of the device management web page are admin. It is recommended for security purposes that you change the default password.  If your SIM cards personal identification number (PIN) verification function is enabled, log in to the device management web page at http://huawei.setup or http://192.168.8.1, enter and save the PIN.   If you do not wish to use the default access point name (APN), log in to the device management web page at http://huawei.setup or http://192.168.8.1, to configure and save the APN settings.  If you are not connected to the network, access http://huawei.setup or http://192.168.8.1 to check the device status.  
						

							12 
 If you cannot access http://huawei.setup or http://192.168.8.1, disconnect other network connections, such as an Ethernet or Wi-Fi connection, remove and then re-insert the LTE E8372, or restart the computer. 
D i s con n e ct in g  f r om  a  N et w o r k 
Before you remove the LTE E8372, make sure that the data connection has been disconnected Unplug the LTE E8372 from your computer or disconnect the LTE E8372s data connection through the device management web page at http://huawei.setup or http://192.168.8.1 or the Mobile Wi-Fi application.  Note:  By default, the LTE E8372 automatically disconnects from the network if no data is transferred within 10 minutes.   The connection is automatically re-established by accessing the internet.   
						

							13 
Using the LTE E8372 as a Wi-Fi hotspot connected to your 
computer 
(Connection scenario 2) 
To manage your LTE E8372’s Wi-Fi functions, login to the device management web page at http://huawei.setup or http://192.168.8.1 to configure the Wi-Fi functions. 
Se t t in g  U p  a  W i-F i  Co n n ect i on 
1.  Insert LTE E8372 into computer (or power adapter).. 2.  Ensure that the LTE E8372s Wi-Fi function is on. The Wi-Fi indicator light should be on. 3.  Search for Wi-Fi from your Wi-Fi device or computer to find the LTE8372’s Wi-Fi SSID, as detailed in the “Getting Started” section. 4.  Select the wireless network connection with the LTE E8372s SSID and click Connect. 5.  Enter the Wi-Fi Network key as detailed in the “Getting Started” section. Note: Before establishing a Wi-Fi connection, ensure that the computer is equipped with a wireless network adapter. If the computer indicates a wireless network connection, the  
						

							14 
wireless network adapter can be used. Otherwise, verify that your wireless network adapter is working properly. 6.  Wait until a wireless network connection icon is displayed in the lower right corner of the computer screen. A wireless network connection is set up.  
A cce s s in g  t h e In t er n e t 
You can access the Internet after a connection between your LTE E8372 and Wi-Fi device is set up.   Note:  By default, the LTE E8372 automatically disconnects from the Internet when you are roaming.  
						

							15 
Using the LTE E8372 with a Power Adapter 
(Connection scenario 3) 
Connect the LTE E8372 to the power adapters USB port, and connect the power adapter to a power outlet.  
 Note:   The power adapter is not included in the product package. Only use a USB power   
						

							16 
adapter rated 5V with a minimum output current of 750mA as marked on the power adapter.   Use of a power adapter not matching the recommended specifications may cause the LTE E8372 to malfunction, fail, or could even cause a fire. Such use voids all warranties, on the product, whether expressed or implied. Please refer to the enclosed warranty card for additional information on your warranty.  
						

							17 
E x am pl e  1 : Con n e ct in g  a  Gam e Con s o l e (f or  e x am pl e , P S P ) t h r ou g h  W i-Fi 
1.  On the PSP, turn on the WLAN. 2.  Choose Settings > Network Settings. 3.  Select Infrastructure Mode. 4.  Select New Connection, and enter the connection name. 5.  Select Scan to search for wireless networks. A list of access points will be displayed on the screen. 6.  Select the access point with the LTE E8372s SSID, and press the ► button on the PSP. Confirm the SSID, and enter the correct wireless network encryption key. 
						

							18 
7.  Press the ► button to proceed to the next step, and then press the X button to save settings. 8.  Select Test Connection to test whether the network connection is successful. 9.  You can now open the browser and access the network. 
  
						

							19 
E x am pl e  2 : Con n e ct in g  a  Ta bl et  Com p u t er  (fo r  ex am p l e, iP ad ) t h r ou g h  W i-Fi 
1.  Touch Settings > WLAN to turn on WLAN. 2.  The tablet computer automatically searches for wireless connections and displays a list of access points. 3.  Select the access point with the LTE E8372s SSID. 4.  If required, enter the correct wireless network encryption key, and tap Join. (The lock icon indicates that the encryption key is required to connect to this wireless network.)