HP Proliant Dl580 Generation 5 User Guide

 
Component identification  11 
Rear panel LEDs and buttons 
     
Item Description  LED color Status 
1  NIC 2 Activity LED   Green  On or flashing—Network activity  Off—No network activity 
2  NIC 2 Link LED  Green  On—Linked to network Off—Not linked to network 
3  UID  Blue  On—Front UID button activated Off—Normal 
4  iLO 2 NIC Activity LED  Green  On  or flashing—Network activity 
Off—No network activity 
5  iLO 2 NIC Link LED  Green  On—Linked to network  Off—Not linked to network 
6  NIC 1 Link...

 
Component identification  12 
Power supply LED 
             
Power LED 
(green)  Failure LED 
(amber) Status 
Off  Off  No AC power to power supply units 
On  Off  AC present. Standby output on
. Power supply DC output on and OK 
Off  On  Power supply failure (includes overvoltage and overtemperature)    

 
Component identification  13 
System board components 
     
Item Description 
1 Fan 1 
2 Fan 2 
3 Connector for: 
•  PCI Express x8 3 Slot  Option Card (optional) 
• PCI-X 3 Slot Option Card (optional) 
4 Fan 3 
5 Fan 5 
6 Fan 4 
7 Fan 6 
8  PCI Express x8 non-hot-plug expansion slot 4 
9  PCI Express x8 non-hot-plug expansion slot 5 
10  PCI Express x8 non-hot-plug expansion slot 6 
11  PCI Express x8 non-hot-plug expansion slot 7 
12  PCI Express x4 non-hot-plug expansion slot 8 
13  PCI Express x4...

 
Component identification  14 
Item Description 
16  System maintenance switch 
17 SPI board   
SPI board components 
     
Item Description 
1  BBWC cache module connectors 
2 Battery   
System maintenance switch 
The system maintenance switch (SW1) is an eight-position  switch that is used for system configuration. The 
default position for all  eight positions is Off. 
   
Position Description  Function 
S1  iLO 2 Security  Off = iLO 2 security is enabled 
On = iLO 2 security is disabled 
S2...

 
Component identification  15 
Position Description  Function 
S6 Invalidate  configuration  Off = Normal 
On = Clears NVRAM 
S7 Reserved Reserved 
S8 Reserved Reserved 
   
FBDIMM slot locations 
 
The server contains 16 FBDIMM slots on the processo r-memory board, which are numbered sequentially 
from 1 to 16. The paired banks are identified by the letters A through H. 
Four FBDIMM slots located on each optional memory  board are numbered from 1 to 4. The paired banks 
are identified by the letters A...

 
Component identification  16 
SAS device numbers 
 
   

 
Component identification  17 
SAS hard drive LEDs 
     
Item Description 
1  Fault/UID LED (amber/blue) 
2  Online LED (green)     
SAS hard drive LED combinations      
Online/activity 
LED (green)  Fault/UID LED 
(amber/blue)  Interpretation 
On, off, or 
flashing Alternating amber and 
blue  The drive has failed, or a pred
ictive failure alert has been 
received for this drive; it also has been selected by a 
management application. 
On, off, or 
flashing  Steadily blue  The drive is operating no...

 
Component identification  18 
Online/activity 
LED (green)  Fault/UID LED 
(amber/blue)  Interpretation 
Flashing 
irregularly 
Off  The drive is active, and it is operating normally. 
Off  Steadily amber  A critical fault conditio
n has been identified for this drive, and 
the controller has placed it offlin e. Replace the drive as soon as 
possible. 
Off Amber, flashing  regularly (1 Hz)  A predictive failure alert has b
een received for this drive. 
Replace the drive as soon as possible. 
Off  Off...

 
Component identification  19 
     
LED3 pattern  LED4 pattern  Interpretation 
—  One blink every  two seconds The system is powered down, and th
e cache contains data that has 
not yet been written to the drives. Restore system power as soon as 
possible to prevent data loss.  
Data preservation time is extend ed any time that 3.3 V auxiliary 
power is available, as indicated by LED 2. In the absence of 
auxiliary power, battery power alone preserves the data. A fully-
charged battery can normally...

 
Component identification  20 
Fan locations