HP Photosmart Premium Fax C410 User Manual

4.Follow the prompts on display to complete connection.
5.Install software.
If the connection to the network is successful, the blue wireless light on the
Wireless button should come on and remain steady. If it is blinking, this indicates that
connection to the network is not a good.
Related topics
Install the software for a network connection
Wireless without a router (ad hoc connection)
Use this section if you want to connect the HP Photosmart to a wireless-capable computer
without using a wireless...

NOTE:The product comes configured with a network profile with hp (product
model).(6-digit unique identifier) as the network name (SSID). However, for
security and privacy HP recommends you create a new network profile on your
computer as described here.
To create a network profile (Windows Vista)
NOTE:The product comes configured with a network profile with hp (product
model).(6-digit unique identifier) as the network name (SSID). However, for
security and privacy HP recommends you create a new network...

d. Make sure that the check box is not selected next to The key is provided for me
automatically. If it is selected, click the check box to clear it.
e.In the Network key box, type a WEP key that has exactly 5 or exactly 13
alphanumeric (ASCII) characters. For example, if you enter 5 characters, you
might enter ABCDE or 12345. Or, if you enter 13 characters, you might enter
ABCDEF1234567. (12345 and ABCDE are examples only. Select a combination
of your choosing.)
Alternatively, you can use HEX...

4.Use the arrow buttons to highlight the network name, and then press OK.
If you found your network name and selected it, go on to step 6.
If you do not see your network name in the list
a.Select Enter a New Network Name (SSID).
The visual keyboard appears.
b. Enter the SSID. Use the arrow buttons on the control panel to highlight a letter or
number on the visual keyboard, and then press OK to select it.
NOTE:You must enter the exact uppercase (capital) and lowercase (small)
letters. Otherwise, the...

Related topics
Install the software for a network connection
Wired (Ethernet) network
Before you connect the HP Photosmart to a network, make sure you have all of the
required materials.
 A functional Ethernet network that includes a router, switch, or hub with an Ethernet
port.
 CAT-5 Ethernet cable.
Although standard Ethernet cables look similar to standard telephone cables, they
are not interchangeable. There is a different number of wires in each one, and each
has a different connector. An Ethernet...

3.Connect the other end of the Ethernet cable to an available port on your Ethernet
router, switch, or wireless router.
4.Once you have connected the product to the network, install the software.
Related topics
Install the software for a network connection
Install the software for a network connection
Use this section to install the HP Photosmart software on a computer connected to a
network. Before you install the software, make sure you have connected the
HP Photosmart to a network. If the HP...

To install the Windows HP Photosmart Software on a networked computer
1.Quit all applications running on your computer.
2.Insert the installation CD that came with the product into the CD-ROM drive on your
computer and follow the onscreen instructions.
NOTE:If the HP Photosmart is not connected to a network, run the Wireless
Setup Wizard from the Network menu on the HP Photosmart. If during software
installation, the software cannot find the product on the network or you were
unable to successfully run...

Set up the HP Photosmart for faxing
Before you begin setting up the HP Photosmart for faxing, determine which kind of phone
system your country/region uses. The instructions for setting up the HP Photosmart for
faxing differ depending on whether you have a serial- or parallel-type phone system.
•If you do not see your country/region listed in the table below, you probably have a
serial-type phone system. In a serial-type phone system, the connector type on your
shared telephone equipment (modems, phones,...

If you are unsure which kind of telephone system you have (serial or parallel), check with
your telephone company.
See the following sections to set up the HP Photosmart for faxing:
•Choose the correct fax setup for your home or office
•Select your fax setup case
•Additional fax setup information
Choose the correct fax setup for your home or office
To fax successfully, you need to know what types of equipment and services (if any) share
the same phone line with the HP Photosmart. This is important...

4.Do you receive voice calls at the same phone number you will use for fax calls on the
HP Photosmart?
 Yes, I receive voice calls.
No.
Please continue answering questions.
5.Do you have a computer dial-up modem on the same phone line as the
HP Photosmart?
 Yes, I have a computer dial-up modem.
No.
Are you unsure if you use a computer dial-up modem? If you answer Yes to any of
the following questions, you are using a computer dial-up modem:
• Do you send and receive faxes directly to and from your...