HP Photosmart C8183 User Manual
Here you can view all the pages of manual HP Photosmart C8183 User Manual. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 51
ParameterDescription NOTE:Check to see if a DNS IP address appears on the network configuration page. If no address is shown, obtain the DNS IP address from your Internet service provider (ISP). Wireless StatusStatus of the wireless network: •Connected : The HP All-in-One is connected to a wireless LAN and everything is working. •Disconnected : The HP All-in-One is not connected to the wireless LAN due to incorrect settings (such as the wrong WEP key), the HP All-in-One is out of range, or an Ethernet...
Page 52
ParameterDescription Authentication typeType of authentication in use: •None: No authentication in use. •Open System (ad hoc and infrastructure): No authentication •Shared Key: WEP key is required. •WPA-PSK (infrastructure only): WPA with Pre-Shared Key. •Not applicable : This parameter does not apply to this network type. Authentication verifies the identity of a user or device before granting access to the network, making it more diff icult for unauthorized users to access network resources. This...
Page 53
ParameterDescription Total Packets receivedThe number of packets received by the HP All-in-One without error since it has been turned on. The counter clears after the HP All-in-One is turned off. Bluetooth settings The following table describes the Bluetooth settings shown on the network configuration page. ParameterDescription Device AddressThe hardware address of the Bluetooth device. Device NameThe device name assigned to the printer, which can identify it on a Bluetooth device. PasskeyA value that...
Page 54
EthernetThe most common local network technology that connects computers using copper cabling. Ethernet cableThe cable used to connect network elements in a wired network. The CAT-5 Ethernet cable is also known as a straight-through cable. When using an Ethernet cable, the network elements must be attached to a router. An Ethernet cable uses an RJ-45 connector. EWSEmbedded Web Server. A browser-based utility that provides a simple way to manage the HP All-in-One. You can monitor status, configure HP...
Page 55
WPAWi-Fi Protected Access (WPA) is a type of encryption used for wireless network security. WPA offers greater security than WEP. Chapter 4 (continued) 54 Finish setting up the HP All-in-One Finish setup
Page 56
5 How do I? This section contains links to commonly performed tasks, such as printing photos, burning and labeling CD/DVDs, scanning, and making copies. •“ How do I print 10 x 15 cm (4 x 6 inch) borderless photos from a memory card?” on page 98 •“ How do I print 13 x 18 cm (5 x 7) inch or larger size photos from a memory card?” on page 98 •“ How do I create special projects from the photos on my memory card?” on page 99 •“ How do I save photos to my computer?” on page 103 •“ How do I preserve photos...
Page 58
6 Load originals and load paper You can load many different types and sizes of paper in the HP All-in-One, including letter or A4 paper, legal paper, photo paper, transparencies, envelopes, and LightScribe- compatible CD/DVD. By default, the HP All-in-One is set to detect the size and type of paper you load in the input tray automatically and then adjust its settings to generate the highest quality output for that paper. If you are using special papers, such as photo paper, transparency film, envelopes,...
Page 59
3.Close the lid. Load an original in the Sl ide and Negative Film holder You can scan 35 mm slides and negatives with the HP All-in-One using the Slide and Negative Film holder. After you scan slides or negatives, remove the slide or negative film from the holder, and then replace the holder and lid backing on the HP All-in-One. To load 35 mm negatives 1.Raise the lid, remove the lid backing, and then remove the Slide and Negative Film holder. Set the lid backing aside where it will not get damaged or...
Page 60
3.Slide the negative film into the center of the holder so that the front of the image faces away from you and appears backward. 4.Place the holder on the glass so the side holding your negative is lined up against the right front corner of the glass. 5.Lower the lid of the HP All-in-One before starting the scan. To load 35 mm slides NOTE: The HP All-in-One does not support scanning negative film that is mounted as a slide in plastic or cardboard. 1. Raise the lid, remove the lid backing and, then...