HP Photosmart C8183 User Manual

4.Touch the language you want to select.
NOTE: If the menu option you want is not visible on the screen, touch  or
 to scroll through all the menu options.
5.When prompted, touch  Yes to confirm your selection, or touch  No to choose another
language.
To set the country/region
1. Touch  Setup on the display.
2. Touch  Preferences .
3. Touch  Set Country/Region .
4. Touch the country/region you want to select.
NOTE: If the menu option you want is not visible on the screen, touch  or
 to scroll through...

To turn faster browsing on or off
1.Touch  Setup on the display.
2. Touch  Tools.
3. Touch 
 to scroll through the options, and then touch  Enable Faster Browsing.
4. Touch  On or  Off  to turn it on or off.
Set the paper tray  for printing from a Bluetooth device
Set the default paper tray to use when you print photos from a Bluetooth device.
To set the paper tray  for printing from a Bluetooth device
1. Touch  Setup.
2. Touch  Bluetooth .
NOTE:If the menu option you want is not visible on the screen,...

There are two types of slideshows that you can enable:
•Store Demo : appears after the HP All-in-One is inactive for one minute and shows a
set of predefined graphics that describe features of the device. The slideshow plays
until you press a button or use the device. If the HP All-in-One remains inactive for
eight hours, the display turns off.
NOTE: HP recommends leaving  Store Demo off.
•Tips Slideshow : appears only after you print from the computer. The HP All-in-One
shows a set of predefined slides...

Computer connection information
The HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. You can also connect the HP All-in-One to either a wired
or wireless network. Additionally, the built-in Bluetooth
® Wireless Technology allows
Bluetooth® devices to print to the HP All-in-One.
This section contains the following topics:
•
Supported connection types
•
Connect using Ethernet
•
Connect using integrated wireless WLAN 802.11
•
Connect using an...

Connect using integrated wireless WLAN 802.11
The HP All-in-One uses an internal networking component that supports a wireless
network. For detailed instructions on connecting the HP All-in-One to a wireless (802.11)
network, see “
Integrated wireless WLAN 802.11 network setup” on page 32 .
Connect using an integrated wireless Bluetooth® connection
The integrated wireless Bluetooth® connection allows you to print images from most
Bluetooth devices, including computers.
This section contains the...

6.When you have finished entering a name for the HP All-in-One, touch  OK.
The name you entered will appear on your Bluetooth device when you connect to the
HP All-in-One to print.
7. Touch  OK to exit the  Setup menu.
Related topics
“
Enter text using the visual keyboard” on page 14
Set Bluetooth security  for the HP All-in-One
You can enable printer security settings through the  Bluetooth menu on the HP All-in-
One. Touch  Setup on the display, and then touch  Bluetooth. From the Bluetooth  menu,
you...

5.Use the visual keyboard  to enter a new passkey.
NOTE:The passkey must be 1 to 4 charac ters long, and can only consist of
numbers.
6. When you have finished en tering your passkey, touch OK.
The  Bluetooth  menu appears.
7. Touch  Security Level .
8. Touch  High.
High level security requires authentication.
Passkey authentication is now set for the HP All-in-One.
Related topics
“
Enter text using the visual keyboard” on page 14
Set the HP All-in-One to be invisible to Bluetooth devices
You can set...

To turn the Bluetooth radio on and off
1.Touch  Setup on the display.
2. Touch  Bluetooth .
NOTE:If the menu option you want is not visible on the screen, touch  or
 to scroll through all the menu options.
3.Touch  Bluetooth Radio .
4. Touch  On or  Off .
Reset Bluetooth settings  on the HP All-in-One
You can reset all of the Bluetooth settings on the HP All-in-One to the factory defaults.
NOTE: Only select  Reset Bluetooth  if you want all of the HP All-in-One Bluetooth
settings returned to factory...

To install and print using the Microsoft stack
1.Make sure that you have installed the HP All-in-One software on the computer.
NOTE: The purpose of installing the software is to make sure the printer driver
is available for the Bluetooth® connection. Therefore, if you have already installed
the software, you do not need to reinstall it. If you want both a USB and a
Bluetooth
® connection to the HP All-in-One, install the USB connection first. For
more information, see the Setup Guide. However, if you do...

access only to the print features. You must perform other functions from the host
computer or from the control panel on the HP All-in-One.
To enable printer sharing on a Windows computer
▲Refer to the user guide that came with your computer or see the Windows onscreen
Help.
Connect to a network
This section describes how to connect the HP All-in-One to a network and how to view
and manage network settings.
If you want to:See this section:
Connect to a wired (Ethernet) network.“Wired network setup” on...