HP PhotoSmart C6283 User Manual

2.Insert the stack of cards into the photo tray with the short edge forward and the print
side down. Slide the stack forward until it stops.
3. Slide the paper-length and paper-width guides inward against the stack of cards until
the guides stop.
Do not overload the photo tray; make sure the stack of cards fits within the photo tray
and is no higher than the top of the paper-width guide.
4.Push in the photo tray, and then lower the output tray.
Related topics
•“
Change the print settings for the current...

To load envelopes
1.Pull out the main input tray, and then slide the paper-width and paper-length guides
to their outermost positions.
2.Remove all paper from the main input tray.
3. Insert one or more envelopes  into the far-right side of the main input tray with the
envelope flaps up and on the left. Slide the stack of envelopes forward until it stops.
4. Slide the paper-width guide inward against the stack of envelopes until it stops.
Do not overload the main input tray; make sure the stack of...

Load other types of paper
The following types of paper are designed for special projects. Create your project in the
HP Photosmart Software or another application, set the paper type and size, and then
print.
HP Premium Inkjet Transparency Film and HP Premium Plus Inkjet Transparency
Film
▲Insert the film so that the white transparency strip (with arrows and the HP logo) is on
top and is going into the input tray first.
NOTE: For best results, set the paper type to transparency film before printing
on...

Related topics
•“
Change the print settings for the current job” on page 46
•“
Recommended papers for printing only” on page 35
Avoid paper jams
To help avoid paper jams, follow these guidelines.
• Remove printed papers from the output tray frequently.
• Prevent curled or wrinkled paper by storing  all unused paper flat in a resealable bag.
• Ensure that paper loaded in the input tray lays flat and the edges are not bent or torn.
• If you are printing labels, ensure that th e label sheets are no more...

Chapter 6
44 Load originals and load paper
Load originals and load paper
 

7 Print from your computer
The HP All-in-One can be used with any software application that allows printing. You
can print a range of projects, such as borderless images, newsletters, greeting cards,
iron-on transfers, and posters.
You can also automatically print on both sides of the page using the Two-sided printing
accessory included with the HP All-in-One to print brochures and booklets, or just save
paper.
This section contains the following topics:
•
Print from a software application
•
Make the HP...

5.Select the appropriate options for your print job by using the features available in the
Advanced , Printing Shortcuts , Features , and Color  tabs.
TIP: You can easily select the appropriate options for your print job by choosing
one of the predefined print tasks on the  Printing Shortcuts tab. Click a type of
print task in the  Printing Shortcuts  list. The default settings  for that type of print
task are set and summarized on the  Printing Shortcuts tab. If necessary, you
can adjust the settings...

To set the paper size
1.Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Resizing Options  area, from the Size drop-down list, select  More.
7. Select...

To set the paper type for printing
1. Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One  is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Basic Options  area, from the  Paper Type drop-down list, select...

6.In the  Print Quality  drop-down list, select the appropriate quality setting for your
project.
NOTE: To view the maximum dpi that the HP All-in-One will print, click
Resolution .
7.In the  Paper Type  drop-down list, select the type of paper that you have loaded.
Change the page orientation
The page orientation setting allows you to print your document vertically or horizontally
on the page.
Usually, you set the page orientation in the software application you used to create your
document or project....