HP PhotoSmart C6283 User Manual

Photosmart Express Menu
The following options are available in the Photosmart Express menu when you insert a
memory card or press  Photo Menu on the control panel.
View
PrintCreateShareSave
Scan Menu
The following options are available when you press the  Scan Menu button on the control
panel.
NOTE: The applications that appear on the  Scan Menu vary depending on the
software applications installed on your computer.
Scan and Reprint
Scan to Memory Card
HP Photosmart Premier
Scan to Computer
NOTE: The...

Network
Copy Menu
The following options are available when you press the Copy Menu button on the control
panel.
Copies
Size
Quality
Lighter/Darker
Preview
Crop
Paper Size
Paper Type
Margin Shift
Enhancements
Set As New Defaults
Help Menu
The  Help Menu  menu provides quick access to key help topics and is available when
you press the  Help button. If you select one of the first six topics, the help appears on
the display. If you select one of the remaining topics, the help appears on your computer.
The...

For more information on using the HP Photosmart Software:
•Check the  Contents panel on the left. Look for the  HP Photosmart Software Help
contents  book at the top.
• If you do not see the  HP Photosmart Software Help contents  book at the top of the
Contents  panel, access the software help through the HP Solution Center.
Chapter 2
12 HP All-in-One overview
Overview
 

3 Find more information
You can access a variety of resources, both printed and onscreen, that provide
information about setting up and using the HP All-in-One.
Setup Guide
The Setup Guide provides instructions for setting up the HP All-in-One and
installing software. Make sure you follow the steps in the Setup Guide in order.
If you have problems during setup, check the Setup Guide for troubleshooting
information, or see  “
Troubleshooting” on page 109  in this onscreen Help.
HP Photosmart  
2600...

Chapter 3
14 Find more information
Find more information
 

4 Finish setting up the HP All-in-One
After you have completed  the steps in your Setup Guide, re fer to this section to help you
finish setting up the HP All-in-One. This section contains important setup-related
information for your device, including information on setting preferences.
This section contains the following topics:
•
Set your preferences
•
Computer connection information
•
Connect to a network
Set your preferences
You can change the settings on the HP All-in-One so that it behaves...

3.Press  to highlight  Set Country/Region , and then press OK.
4. Press 
 to scroll through the countries/regions. When the country/region you want
to use appears, press  OK.
5. When prompted to confirm the country/region, press 
 to highlight  Yes or No, and
then press  OK.
Set the default paper tray for DPOF printing
Set the default paper tray to use when you print photos from a DPOF file. The default
setting is  Photo Tray .
To set the defa ult paper tray
1. Press  Setup.
2. Press 
 to highlight...

Play a slideshow on the display
You can set up the HP All-in-One to play a slideshow on the display, similar to a
screensaver on a computer, when you are not using the device.
There are two types of slideshows that you can enable:
•Demo Mode : appears after the HP All-in-One is inactive for one minute and shows
a set of predefined graphics that describe features of the device. The slideshow plays
until you press a button or use the device. If the HP All-in-One remains inactive for
eight hours, the...

DescriptionRecommended number
of connected
computers for best
performanceSupported software
featuresSetup instructions
rear USB 2.0 High Speed
port on the HP All-in-One.
Ethernet (wired)
connectionUp to five computers
connected to an HP All-
in-One using a hub or
router.All features are
supported, including
Webscan.Follow the instructions in
“Wired network setup”
on page 19 .
Printer sharingUp to five computers.
The host computer must
be turned on at all times,
or the other computers
will not be able to...

If you want to:See this section:
Change the HP All-in-One from a USB
connection to a network connection.
NOTE:Use the instructions in this section if
you first installed the HP All-in-One with a USB
connection, and you now want to change to an
Ethernet network connection.“Change the HP All-in-One from a USBconnection to a network connection”
on page 22
View or change the network settings.“Manage your network settings” on page 22
Find definitions of networking terms.“Network glossary” on page 29
Find...