HP Photosmart C4580 User Manual

Make sure you have the following materials available:
•Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart
or leave fibers.
TIP: Coffee filters are lint-free and work well for cleaning print cartridges.
•Distilled, filtered, or bottled water (tap water might contain contaminants that can
damage the print cartridges).
CAUTION: Do not  use platen cleaners or alcohol to clean the print cartridge
contacts. These can damage the print cartridge or the product.
For more...

Solution 1: Check the print cartridgeSolution: Check to make sure you are using th e correct print cartridges for your
product. For a list of compatible print cartridges, see the printed documentation that
came with the product.
If you are using print cartridges that are not compatible with the product, replace the
indicated print cartridges with print cartridges that are compatible.
If it appears that you are using the corre ct print cartridges, proceed to the next
solution.
For more information, see:...

Also, make sure the print cartridges are installed into the correct slots.
To make sure the print cartridges are installed correctly
1. Make sure the product is turned on.
CAUTION: If the product is turned off when you open the print cartridge door
to access the print cartridges, it will not release the cartridges for changing.
You might damage the product if the print cartridges are not docked safely
when you try to remove them.
2. Open the print cartridge door.
The print carriage moves to the far...

5.Reinsert the print cartridge by sliding it forward into the slot on the right. Then
push the print cartridge forward  until it clicks into the socket.
6.Repeat steps 1 and 2 for the tri-color print cartridge on the left side.
NOTE: If the print cartridges are installed in the wrong slots and you cannot
remove them from the product, contact HP support for service.
Go to: 
www.hp.com/support .
If prompted, choose your country/region, and then click  Contact HP for
information on calling for technical...

3.Check to make sure you are using the correct print cartridges for your product. For a
list of compatible print cartridges, see the printed documentation that came with the
product.
4. Remove the black print cartridge from the slot on the right.
Press down on the cartridge to release it, and then pull it toward you out of the slot.
1Tri-color print cartridge
2Black print cartridge
5.Close the print cartridge door.
6. Check to see if the e rror has been resolved.
• If the error has been resolved, then...

8.Remove the tri-color print cartridge from the slot on the left.
Press down on the cartridge to release it, and then pull it toward you out of the slot.
9. Close the print cartridge door.
10. Check to see if the error has been resolved.
• If the error has been resolved, then there is a problem with the tri-color print
cartridge.
• If the error has not been resolved, then there is a problem with both print cartridges.
11. Open the print cartridge door and reinsert the tri-color print cartridge by...

3.Check to make sure you are using the correct print cartridges for your product.
For a list of compatible print cartridges, see the printed documentation that came
with the product.
4. Remove the black print cartridge from the slot on the right. Do not touch the ink
nozzles or the copper-colored contacts. Check for possible damage to the copper-
colored contacts or ink nozzles.
Make sure the clear plastic ta pe has been removed. If it is still covering the ink
nozzles, gently remove the clear plastic...

6.Repeat steps 1 and 2 for the tri-color print cartridge on the left side.
Cause: The indicated print cartridges were installed incorrectly.
If this did not solve the issue, try the next solution.
Solution 2: Clean the print cartridge contacts Solution: Clean the print cartridge contacts on the print cartridges that are
experiencing the problem.
Make sure you have the following materials available:
• Dry foam rubber swabs, lint-free cloth, or any soft material that will not come apart
or leave fibers....

NOTE:During ink-backup mode, the product can only print jobs from the
computer. You cannot initiate a print job from the control panel (such as printing
a photo from a memory card).
Cause: One or both of the print cartridges were having a problem.
Previously used genuine HP cartridge installed
Solution: Check the print quality of the current print job. If it is satisfactory, follow
the prompts on the display to continue.
HP recommends that you have an new print cartridge available, to avoid printing...

14 HP warranty and support
Hewlett-Packard provides Internet and phone support for the HP All-in-One.
This section contains the following topics:
•
Warranty
•
Print cartridge warranty information
•
Support process
•
Before you call HP support
•
HP support by phone
•
Additional warranty options
•
HP Quick Exchange Service (Japan)
•
HP Korea customer support
•
Prepare the product for shipment
•
Pack the HP All-in-One
Warranty
For more information about the warranty, see the printed documentation that came...