HP Photosmart C4345 User Manual

3.Press the button next to  Start Copy Black or Start Copy Color  to begin copying.
Change the copy settings  for the current job
You can customize the copy settings of the HP All-in-One to handle nearly any copy task.
This section contains the following topics:
•
Make multiple copies of the same original
•
Change copy speed or quality
Make multiple copies of the same original
You can set the number of copies from the control panel of the HP All-in-One or from the
HP Photosmart Software. This task...

3.Press  Copies  to increase the number of copies. When you reach the maximum, the
setting returns to 1 copy.
TIP: Use the software that you installed with the product to set a higher number
of copies. When the number of copies is greater than 9, only the last digit of the
number of copies is displayed on the control panel.
4. Press the button next to  Start Copy Black or Start Copy Color .
In this example, the product makes six copies of the original 10 x 15 cm (4 x 6 inch)
photo.
Related topics
“
Use...

2.Load your original print side down on the right front corner of the glass.
3.Press  Quality  to select one star, two stars, or three stars.
4. Press the button next to  Start Copy Black or Start Copy Color .
Perform special copy jobs
In addition to supporting standard copy jobs, the HP All-in-One can perform special jobs
such as copying borderless photos and resizing originals.
This section contains the following topics:
•
Make a borderless copy of a photo
•
Resize an original to fit onto letter or A4...

2.Load your original photo print side down on the right front corner of the glass.
3.Press  Size to select  Borderless .
4. Press the button next to  Start Copy Color.
The product makes a borderless copy of  your original photo, as shown below.
Perform special copy jobs 71
Use the copy features
 

Resize an original to fit onto letter or A4 paper
You can use the Resize to Fit feature to copy an original to fit within the printable margins
of a page without the risk of cropping some part of your original. This is useful for reducing
or enlarging an original. For example:
• If you enlarge a 10 x 15 cm (4 x 6 inch) photo to make a borderless full-size copy on
letter or A4 paper, some part of your photo will be cropped. The  Resize to Fit feature
will enlarge the photo as much as possible to fit the...

2.Load your original print side down on the right front corner of the glass.
3.Press  Size to select  Resize to Fit .
4. Press the button next to  Start Copy Black or Start Copy Color .
Stop copying
To stop copying
▲Press  Cancel .
Stop copying 73
Use the copy features
 

Chapter 9
74 Use the copy features
Use the copy features
 

10 Use the scan features
Scanning is the process of converting text and pictures into an electronic format for your
computer. You can scan almost anything (photos, magazine articles, and text documents)
on the HP All-in-One.
You can use the scanning features of the HP All-in-One to do the following:
• Scan text from an article into your word processor, and quote it in a report.
• Print business cards and brochures by scanning a logo and using it in your publishing
software.
• Send photos to friends and...

To scan to a computer
1.Load your original print side down on the right front corner of the glass.
NOTE: Ensure that there are no memory cards inserted in the memory card slots
on the product.
2. Press the button next to  Scan/Fax.
The  Scan/Fax  menu appears.
3. Press the button next to  Start Scan.
A preview image of the scan appears on your computer, where you can edit it. Any
edits that you make apply to  the current scan session only.
The HP Photosmart Software has many tool s that you can use to...

Edit a scanned document
You can edit a scanned document using your Optical Character Recognition (OCR)
software. Scanning text using OCR software enables you to bring the content of magazine
articles, books, and other printed matter into your favorite word processor and many other
applications as editable text. Learning to use OCR software correctly is important if you
want to obtain the best results. Do not expect scanned text documents to be letter-perfect
the first time you use your OCR software....