HP Photosmart B109q User Manual

							Close lid.
c.Select Copy.
 Press button next to Copy.
 Press button next to Black Copy.
 Press button next to Actual Size.
 Press button next to Copies to increase number of copies.
d. Start copy.
Press OK.
Make a color copy
a. Load paper.
 Load full-size paper in paper tray.
b. Load original.
 Lift lid on product.
Chapter 8
38 Copy
Copy
 
						

							TIP:To make copies of thick originals, such as books, you can remove
the lid.
 Load original print side down on right front corner of glass.
Close lid.
c. Select Copy.
 Press button next to Copy.
 Press button next to Color Copy.
 Press button next to Actual Size.
 Press button next to Copies to increase number of copies.
d.Start copy.
 Press OK.
2.View the animation for this topic.
Related topics
•“Change the copy settings” on page 39
•“Stop the current job” on page 99
Change the copy settings
To set the paper size from the control panel
1.Press the button next to Copy.
2.Select the copy type.
3.Press the button next to 8.5 x 11 Plain.
To set the copy size from the control panel
1.Press the button next to Copy.
2.Select the copy type.
3.Press the button next to Actual Size.
Change the copy settings 39
Copy
 
						

							To set the number of copies from the control panel
1.Press the button next to Copy.
2.Select the copy type.
3.Press the button next to Copies to increase the number of copies.
Chapter 8
40 Copy
Copy
 
						

							9 Reprint photos
To reprint an original photo
1.Load paper.
▲Load up to 13 x 18 cm (5 x 7 inch) photo paper in paper tray.
2.Select project type.
a. Press button next to Photo on Home screen.
b. Press button next to Photo Original Reprint.
3.Load original.
a. Lift lid on product.
b. Load original print side down on right front corner of glass.
Reprint photos 41
Reprint photos
 
						

							c.Close lid.
d.Press OK.
4.Reprint photo.
a.Press OK.
b. Press button next to Prints to increase number of copies.
c.Press OK.
5.View the animation for this topic.
Related topics
“Stop the current job” on page 99
Chapter 9
42 Reprint photos
Reprint photos
 
						

							10 Save photos
You can use the HP Photosmart Software installed on your computer to transfer photos
from a memory card to your computer’s hard drive for advanced photo editing, sharing
photos online, and printing from your computer.
Before transferring photos to your computer, you need to remove the memory card from
your digital camera and insert it in the appropriate memory card slot on the
HP Photosmart.
NOTE:The HP Photosmart must be connected to a computer that has the
HP Photosmart Software installed on it.
To save photos
1.Insert your memory card into the appropriate slot on the product.
The software opens on your computer.
2.Follow the onscreen prompts on your computer to save the photos to your computer.
NOTE:Only images that were not previously saved are copied to your computer.
Save photos 43
Save photos
 
						

							Chapter 10
44 Save photos
Save photos
 
						

							11 Maintain the HP Photosmart
•Check the estimated ink levels
•Replace the cartridges
•Order ink supplies
•Cartridge warranty information
•Print and evaluate a print quality report
Check the estimated ink levels
You can easily check the ink supply level to determine how soon you might need to
replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining
in the cartridges.
NOTE:If you have installed a refilled or remanufactured cartridge, or a cartridge that
has been used in another printer, the ink level indicator might be inaccurate or
unavailable.
NOTE:Ink level warnings and indicators provide estimates for planning purposes
only. When you receive a low-ink warning message, consider having a replacement
cartridge available to avoid possible printing delays. You do not have to replace the
cartridges until the print quality is unacceptable.
NOTE:Ink from the cartridges is used in the printing process in a number of different
ways, including in the initialization process, which prepares the product and cartridges
for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing
smoothly. In addition, some residual ink is left in the cartridge after it is used. For more
information, see www.hp.com/go/inkusage.
To check the ink levels from the HP Photosmart Software
1.In the HP Solution Center, click Settings, point to Print Settings, and then click
Printer Toolbox.
NOTE:You can also open the Printer Toolbox from the Print Properties dialog
box. In the Print Properties dialog box, click the Features tab, and then click the
Printer Services button.
The Printer Toolbox appears.
2.Click the Estimated Ink Level tab.
The estimated ink levels for the ink cartridges appear.
Related topics
“Order ink supplies” on page 48
Maintain the HP Photosmart 45
Maintain the HP Photosmart
 
						

							Replace the cartridges
To replace the cartridges
1.Check that power is on.
2.Remove cartridge.
a. Open cartridge access door.
Wait for print carriage to move to center of product.
b. Press tab on cartridge, then remove it from slot.
3.Insert new cartridge.
a. Remove cartridge from packaging.
Chapter 11
46 Maintain the HP Photosmart
Maintain the HP Photosmart
 
						

							b. Twist orange cap to snap it off. A forceful twist may be required to remove cap.
c. Match color icons, then slide cartridge into slot until it clicks into place.
d. Close cartridge door.
Replace the cartridges 47
Maintain the HP Photosmart