HP Pavilion Dv8 1100 Entertainment Notebook Pc Series Manual

Removal and replacement procedures
Maintenance and Service Guide4–27
Keyboard
✎The keyboard spare part kit includes a keyboard cable.
Before removing the keyboard, follow these steps: 
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, 
and then shut it down through the operating system. 
2. Disconnect all external devices connected to the computer. 
3. Disconnect the power from the computer by first unplugging the power cord from the AC...

4–28Maintenance and Service Guide
Removal and replacement procedures
Remove the keyboard:
1. Turn the computer upside down, with the front toward you.
2. Remove the two Phillips PM2.5×7.0 screws that secure the keyboard to the computer.
3. Turn the computer display-side up, with the front toward you.
4. Open the computer as far as possible.
5. Remove the four Phillips PM2.0×4.0 screws that secure the keyboard to the computer. 

Removal and replacement procedures
Maintenance and Service Guide4–29
6. Lift the rear edge of the keyboard 1 until it rests at an angle.
7. Release the keyboard 2 by sliding it back to disengage the tabs on the front edge of the keyboard from the 
top cover, and rest it on the display.
8. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and disconnect the 
keyboard cable 2 from the system board.
9. Remove the keyboard.
Reverse this procedure to install the...

4–30Maintenance and Service Guide
Removal and replacement procedures
Power button board cable
✎The power button board cable is included with the power button board, spare part number 580987-001.
Before removing the power button board cable, follow these steps: 
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, 
and then shut it down through the operating system. 
2. Disconnect all external devices connected to the computer. 
3. Disconnect...

Removal and replacement procedures
Maintenance and Service Guide4–31
Bluetooth module cable
Before removing the Bluetooth module cable, follow these steps: 
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, 
and then shut it down through the operating system. 
2. Disconnect all external devices connected to the computer. 
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the...

4–32Maintenance and Service Guide
Removal and replacement procedures
LED board cable
✎The LED board cable is included with the keyboard cover, spare part number 577009-001.
Before removing the LED board cable, follow these steps: 
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, 
and then shut it down through the operating system. 
2. Disconnect all external devices connected to the computer. 
3. Disconnect the power from the computer by...

Removal and replacement procedures
Maintenance and Service Guide4–33
Speaker assembly
Before removing the speaker assembly, follow these steps: 
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, 
and then shut it down through the operating system. 
2. Disconnect all external devices connected to the computer. 
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter...

4–34Maintenance and Service Guide
Removal and replacement procedures
Display assembly
Before removing the display assembly, follow these steps: 
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, 
and then shut it down through the operating system. 
2. Disconnect all external devices connected to the computer. 
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter...

Removal and replacement procedures
Maintenance and Service Guide4–35
ÄCAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can 
result in damage to the display assembly and other computer components.
5. Remove the four Phillips PM2.5×7.0 screws 1 that secure the display assembly to the computer. Be sure to 
hold the display before removing the last screw, to prevent damage to the display.
6. Lift the display assembly 2 straight up, and remove...

4–36Maintenance and Service Guide
Removal and replacement procedures
b. Turn the display assembly upside down, with the bottom edge toward you.
c. Release the display enclosure bottom edge 1 as far as the wireless antenna cables and display logo LED 
cable allow.
d. Remove the wireless antenna cables 2 from the slot built into the display hinge cover.
e. Disconnect the display logo LED cable 3 from the display logo LED board.
f. Remove the display enclosure 4. The display enclosure is available using...