HP Pavilion Dv6 1100 Entertainment Notebook Pc Series Manual

4.
Turn the computer right side up, with the front toward you.
5.Open the computer.
6.
Release the optical drive connector cable from the clips (1) built into the base enclosure.
7.Remove the two Phillips PM2.0×7.0 screws (1) that secure the optical drive connector to the
base enclosure.
8.
Remove the optical drive connector cable (3).
Reverse this procedure to install the optical drive connector cable.
Display assembly
NOTE:The display assembly includes a webcam, two microphones, and wireless antenna...

DescriptionSpare part number
In Sonoma red finish641480-001
In steel gray finish650798-001
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from...

3.
Remove the display assembly (4).
4.If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.Remove the two screw covers (1) and the two Phillips PM2.5×5.0 screws (2) that secure the
display bezel to the display assembly. (The screw covers are available in the Display Rubber
Kit, spare part number 641810-001.)
b.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom
edge (3) of the display bezel until the bezel disengages from the...

c.
Remove the display bezel (4). The display bezel is available using spare part numbers
640421-001 (for use only with computer models in dark umber and steel gray finish) and
640420-001 (for use only with computer models in butter gold, espresso black, linen white,
Pacific blue, pearl pink, ruby red, and Sonoma red finish).
5.If it is necessary to replace the webcam/microphone module:
a.Detach and release the webcam/microphone module (1) as far as the webcam/microphone
module cable allows. (The...

b.
Remove the hinge covers (2). The hinge covers are available using spare part number
641807-001.
7.If it is necessary to replace the display panel:
a.Remove the two Phillips PM2.5×3.5 (1) screws and the six Phillips PM2.5×5.0 screws (2)
that secure the display panel to the display enclosure.
Component replacement procedures
107 

b.
Lift the top edge of the display panel (1), and then swing it forward (2) until it rests upside
down in front of the display enclosure.
c.Release the adhesive strips (1) and (2) that secure the display panel cable to the display
panel, and then disconnect the display panel cable (3) from the display panel.
d.Remove the display panel. The display panel is available using spare part numbers
653378-001 (for use with computer models equipped with a 15.6-in, FHD, LED, AntiGlare
108 Chapter 4   Removal and...

display panel) and 640445-001 (for use with computer models equipped with a 15.6-in,
HD, LED, BrightView display panel).
8.If it is necessary to replace the display hinges:
a.
Remove the eight Phillips PM2.0×2.0 screws (1) that secure the display hinges to the
display panel.
b.Remove the display hinges (2). The display hinges include the display hinges and brackets
and are available using spare part number 640429-001.
9.If it is necessary to replace the display panel cable:
a.Release the tabs (1) built...

b.
Release the display panel cable from the clips (2) built into the display enclosure.
c.Remove the display panel cable. The display panel cable includes the webcam/microphone
module cable and is available in the Display Cable Kit, using the following spare part
numbers:
●
656805-001 — For use only with computer models equipped with a FHD display
assembly
●
644362-001 — For use only with computer models in dark umber and steel gray finish
●
640423-001 — For use only with computer models in butter gold,...

c.
Remove the wireless antenna cables and transceivers (3). The wireless antenna cables and
transceivers are available in the Antenna Kit, spare part number 640411-001.
Reverse this procedure to reassemble and install the display assembly.
Component replacement procedures
111 

5 Setup Utility (BIOS) and System
Diagnostics
Using Setup Utility
Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup Utility
includes settings for the types of peripherals installed, the startup sequence of the computer, and the
amount of system and extended memory.
NOTE:Use extreme care when making changes in Setup Utility. Errors can prevent the computer...