HP Pavilion Dv6 1100 Entertainment Notebook Pc Series Manual

4.
Remove the fan/heat sink assembly (2).
NOTE:The following illustration shows the fan/heat sink assembly being removed from a
computer model equipped with an AMD processor and a graphics subsystem with
discrete memory. A computer model equipped with an AMD processor and a graphics subsystem
with UMA memory has only four screws.
NOTE:The following illustration shows the fan/heat sink assembly being removed from a
computer model equipped with an Intel processor and a graphics subsystem with discrete...

The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system
board components each time the fan/heat sink assembly is removed. Replacement thermal material is
included with the fan/heat sink assembly, processor, and system board spare part kits.
Replacement thermal material is also available in the Thermal Material Kit.
NOTE:The following illustration shows the replacement thermal material locations on a computer
model equipped with an AMD processor and a graphics...

Reverse this procedure to reassemble and install the fan/heat sink assembly.
Processor
NOTE:The system board spare part kit includes replacement thermal material.
Replacement thermal material is also available in the Thermal Material Kit, using the following spare
part numbers:
●
654111-001 — For use only with computer models equipped with an AMD A8, A6, A4, or
E2 processor and a graphics subsystem with discrete memory
●
654112-001 — For use only with computer models equipped with an AMD A8, A6, A4, or...

DescriptionSpare part number
AMD A6-3400M 2.30-GHz processor (1.4-GHz FSB, 4.0-MB L2 cache, quad core, 35 W) 653349-001
AMD A4-3310MX 2.50-GHz processor (2.10-GHz FSB, 2.0-MB L2 cache, dual core, 45 W) 653356-001
AMD A4-3300M 2.50-GHz processor (1.9-GHz FSB, 4.0-MB L2 cache, dual core, 35 W) 653348-001
AMD E2-3000M 2.40-GHz processor (1.8-GHz FSB, 4.0-MB L2 cache, quad core, 35 W) 653351-001
AMD Athlon II N370 2.50-GHz processor (1.0-MB L2 cache, 1066-MHz, 3.2GT/sec, dual core,
35 W)634686-001
AMD Athlon...

DescriptionSpare part number
Intel Core i5-2430M 2.40-GHz (SC turbo up to 3.00-GHz) processor (3.0-MB L3 cache, dual core,
35 W)653341-001
Intel Core i5-2410M 2.30-GHz (SC turbo up to 2.90-GHz) processor (3.0-MB L3 cache,
dual core, 35 W)638039-001
Intel Core i3-2350M 2.30-GHz processor (3.0-MB L3 cache, dual core, 35 W) 653340-001
Intel Core i3-2330M 2.20-GHz processor (3.0-MB L3 cache, dual core, 35 W) 653339-001
Intel Core i3-2310M 2.10-GHz processor (3.0-MB L3 cache, dual core, 35 W) 638037-001
Intel...

2.
Lift the processor (2) straight up, and remove it.
NOTE:The gold triangle (3) on the processor must be aligned with the triangle icon embossed
on the processor socket when you install the processor.
NOTE:The following illustration shows the processor removal process on a computer model
equipped with an AMD processor.
NOTE:The following illustration shows the processor removal process on a computer model
equipped with an Intel processor.
Reverse this procedure to install the processor.
98 Chapter 4...

Speakers
DescriptionSpare part number
Speaker cover:
For use only with computer models in dark umber and steel gray finish 641438-001
For use only with computer models in butter gold, espresso black, linen white, Pacific blue, pearl
pink, ruby red, and Sonoma red finish640443-001
Speaker Kit (includes left and right speakers and cable) 640449-001
Before removing the speakers, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer...

3.
Release the rear speaker cable (1) from the clips (2) and routing channel built into the
base enclosure.
4.
Remove the four Phillips PM2.5×4.0 screws (1) and the PM2.5×10.0 screw (2) that secure the
rear speaker to the computer.
5.Turn the computer right side up, with the front toward you.
6.Open the computer.
7.Release the rear speaker cable (1) from the opening in the base enclosure and the clips (2) and
(3) built into the base enclosure.
100 Chapter 4   Removal and replacement procedures 

8.
Remove the rear speaker (4) and cable.
9.
Remove the Phillips PM2.5×4.0 screw (1) that secures the front speaker to the base enclosure.
10.Remove the front speaker (2).
NOTE:When removing the front speaker, note the installation locations of two isolators (3).
Reverse this procedure to install the speakers.
Component replacement procedures
101 

Optical drive connector cable
NOTE:The optical drive connector cable is included in the Cable Kit, spare part number
640422-001. The optical drive connector cable includes the optical drive connector.
Before removing the optical drive connector cable, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer....