HP Pavilion Dm3 1000 Entertainment Notebook Pc Series Manual
Have a look at the manual HP Pavilion Dm3 1000 Entertainment Notebook Pc Series Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Illustrated parts catalog Maintenance and Service Guide3–7 Mass storage devices Item DescriptionSpare part number 1 Hard drive (includes hard drive connector): 250GB,INTERNAL, 5400RPM 580677-001 320GB,INTERNAL, 5400RPM 580678-001 500GB,INTERNAL, 5400RPM 580679-001 250GB,INTERNAL, 7200RPM 580680-001 320GB,INTERNAL, 7200RPM 580681-001 500GB,INTERNAL, 7200RPM 580682-001 160GB,INTERNAL, 7200RPM 581181-001 SSD 128GB (AMD systems) 581182-001 SSD 160GB (Intel systems) 582077-001
3–8Maintenance and Service Guide Illustrated parts catalog Miscellaneous parts Description Spare part number HP 65-W slim adapter 417220-001 Power cords: ■ For use in Argentina 490371-D01 ■ For use in Australia 490371-011 ■ For use in Brazil 490371-201 ■ For use in Denmark 490371-081 ■ For use in Europe, the Middle East, and Africa 490371-021 ■ For use in India 490371-D61 ■ For use in Israel 490371-BB1 ■ For use in Italy 490371-061 ■ For use in Japan 490371-291 ■ For use in South Africa 490371-AR1 ■ For use in South Korea 490371-AD1 ■ For use in Switzerland 490371-111 ■ For use in Taiwan 490371-AB1 ■ For use in the People’s Republic of China 490371-AA1 ■ For use in the United Kingdom and Singapore 490371-031 ■ For use in the United States 490371-001 Rubber kit: 580697-001 Screw kit: ■ Phillips PM2.5×2.5 screw ■ Phillips PM2.0×2.5 screw ■ Phillips PM2.0×5.0 screw ■ Phillips PM2.0×3.5 screw ■ Phillips PM2.5×4.0 screw ■ Phillips PM2.5×6.0 screw ■ Phillips PM2.5×10.0 screw ■ Phillips PM2.5×3.0 screw ■ Phillips PM2.0×3.0 broadhead screw ■ Phillips PM2.0×2.0 broadhead screw ■ Phillips PM2.5×5.0 screw 580698-001
Illustrated parts catalog Maintenance and Service Guide3–9 Sequential part number listing Spare part number Description 417220-001 AC power adapter 490371-D01 Power cord for use in Argentina 490371-011 Power cord for use in Australia 490371-201 Power cord for use in Brazil 490371-081 Power cord for use in Denmark 490371-021 Power cord for use in Europe, the Middle East, and Africa 490371-D61 Power cord for use in India 490371-BB1 Power cord for use in Israel 490371-061 Power cord for use in Italy 490371-291 Power cord for use in Japan 490371-AR1 Power cord for use in South Africa 490371-AD1 Power cord for use in South Korea 490371-111 Power cord for use in Switzerland 490371-AB1 Power cord for use in Taiwan 490371-AA1 Power cord for use in the People’s Republic of China 490371-031 Power cord for use in the United Kingdom and Singapore 490371-001 Power cord for use in the United States 504593-003 WLAN 802.11BG DEMI-2 MOW 504593-004 WLAN 802.11BG DEMI-2 ROW 518434-001 WLAN 802.11ABGN 2X2 CLARET-2 MOW 518434-002 WLAN 802.11ABGN 2X2 CLARET-2 ROW 518436-001 WLAN 802.11BGN MEDOC MOW 518436-002 WLAN 802.11BGN MEDOC ROW 518437-001 WLAN 802.11ABGN MD2020 MOW 518437-002 WLAN 802.11ABGN MD2020 ROW 531993-001 WWAN module 537921-001 Bluetooth module 575926-001 Keyboard for use in the United States 575926-031 Keyboard for use in the United Kingdom 575926-041 Keyboard for use in Germany 575926-051 Keyboard for use in France 575926-061 Keyboard for use in Italy 575926-071 Keyboard for use in Spain 575926-121 Keyboard for use in French Canada 575926-131 Keyboard for use in Portugal 575926-141 Keyboard for use in Turkey 575926-161 Keyboard for use in Latin American
3–10Maintenance and Service Guide Illustrated parts catalog 575926-171 Keyboard for use in Saudi Arabia 575926-201 Keyboard for use in Brazil 575926-221 Keyboard for use in the Czech Republic 575926-251 Keyboard for use in Russia 575926-281 Keyboard for use in Thailand 575926-291 Keyboard for use in Japan 575926-A41 Keyboard for use in Belgium 575926-AB1 Keyboard for use in Taiwan 575926-AD1 Keyboard for use in South Korea 575926-B31 Keyboard for use in the Netherlands 575926-BG1 Keyboard for use in Switzerland 575926-DH1 Keyboard for use in Denmark, Norway, Sweden 580666-001 LCD bezel 580667-001 LCD hinges 580668-001 Display cable 580669-001 Webcam 580673-001 Memory 1-GB 800-MHz DDR2 580674-001 Memory 2-GB 800-MHz DDR2 580675-001 Memory 4-GB 800-MHz DDR2 580677-001 Hard drive, 250GB,INTERNAL, 5400RPM 580678-001 Hard drive, 320GB,INTERNAL, 5400RPM 580679-001 Hard drive, 500GB,INTERNAL, 5400RPM 580680-001 Hard drive, 250GB,INTERNAL, 7200RPM 580681-001 Hard drive, 320GB,INTERNAL, 7200RPM 580682-001 Hard drive, 500GB,INTERNAL, 7200RPM 580683-001 Hard drive hardware kit 580686-001 RTC battery 6C 580689-001 Base enclosure 580691-001 Plastics kit 580692-001 Top cover (Intel systems) 580694-001 Heat sink (UMA, Intel systems) 580695-001 Heat sink (discrete, AMD systems) 580696-001 System fan 580697-001 Rubber kit 580698-001 Screw kit 580699-001 Speakers 580700-001 Power connector cable 580843-001 Cable kit 580845-001 RTC battery Spare part number Description
Illustrated parts catalog Maintenance and Service Guide3–11 581171-001 System board, MV40 FF 1.6G Neo UMA 581172-001 System board, L335 FF 1.6G Althon 512K L2 UMA 581173-001 System board, L625 FF 1.6G Turion 1M L2 UMA 581175-001 System board, L335 FF+ 1.6G Althon 581176-001 System board, L625 FF+ 1.6 Turion 581177-001 Display 13.3 HD BV MA 581181-001 160-GB, hard drive, internal, 7200RPM 581182-001 SSD 128GB (AMD systems) 581186-001 Heat sink UMA (AMD systems) 581187-001 Heat sink discrete (AMD systems) 582077-001 Hard drive SSD 160GB (Intel systems) 583925-001 Top cover (AMD systems) 588159-001 Display, 13.3 HD BrightView LED 591223-001 Display, 13.3 HD BrightView WWAN Spare part number Description
3–12Maintenance and Service Guide Illustrated parts catalog
Maintenance and Service Guide4–1 4 Removal and replacement procedures Preliminary replacement requirements Tools required You will need the following tools to complete the removal and replacement procedures: ■Phillips P0 screwdriver ■Tweezers Service considerations The following sections include some of the considerations that you must k eep in mind during disassembly and assembly procedures. ✎As you remove each subassembly from the computer, place the subassembly (and all accompanying screws) away from the work area to prevent damage. Plastic parts ÄCAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Cables and connectors ÄCAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage . Apply only the tension required to unseat or seat the cables during removal and in sertion. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. Handle fl ex cables with extreme care; these cables tear easily.
4–2Maintenance and Service Guide Removal and replacement procedures Drive handling ÄCAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: ■Before removing or inser ting a hard drive, shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. ■ Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid touching the connector. ■ Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be sure that the optical drive tray is closed. ■ Handle drives on surfaces covered with at least one inch of shock-proof foam. ■ Avoid dropping drives from any height onto any surface. ■ After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag. ■ Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers. ■ Avoid exposing a drive to temperature extremes or liquids. ■ If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective packaging and label the package “FRAGILE.” Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built in to many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions. A discharge of static electricity from a finger or ot her conductor can destroy static-sensitive devices or microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred. An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a normal cycle. Or, the device may function normally for a while, and then degrade in the internal layers, reducing its life expectancy. ÄCAUTION: To prevent damage to the computer when you are removing or installing internal components, observe these precautions: ■ Keep components in their electrostatic-safe co ntainers until you are ready to install them. ■ Use nonmagnetic tools. ■ Before touching an electronic component, discharge st atic electricity by using the guidelines described in this section. ■ Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible. ■ If you remove a component, place it in an electrostatic-safe container.
Removal and replacement procedures Maintenance and Service Guide4–3 The following table shows how humidity affects the electrostatic voltage levels generated by different activities. ÄCAUTION: A product can be degraded by as little as 700 V. Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ■To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ■Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ■Keep ESD-sensitive parts in their containers until they arrive at static-free workstations. ■Place items on a grounded surface before them from their containers. ■Always be properly grounded when touching a component or assembly. ■Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam. ■Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized equipment used for moving materials is wired to ground, and that proper materials are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges. Typical electrostatic voltage levels Relative humidity Event 10% 40% 55% Walking across carpet 35,000 V 15,000 V 7,500 V Walking across vinyl floor 12,000 V 5,000 V 3,000 V Motions of bench worker 6,000 V 800 V 400 V Removing DIPS from plastic tube 2,000 V 700 V 400 V Removing DIPS from vinyl tray 11,500 V 4,000 V 2,000 V Removing DIPS from Styrofoam 14,500 V 5,000 V 3,500 V Removing bubble pack from PCB 26,500 V 20,000 V 7,000 V Packing PCBs in foam-lined box 21,000 V 11,000 V 5,000 V
4–4Maintenance and Service Guide Removal and replacement procedures Workstation guidelines Follow these workstation grounding guidelines: ■Cover the workstation with approved static-shielding material. ■Use a wrist strap connected to a properly grounded work surface, and use properly grounded tools and equipment. ■Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ■When fixtures must directly contact dissipative surface s, use fixtures made only of static-safe materials. ■Keep the work area free of nonconductive materials, su ch as ordinary plastic assembly aids and Styrofoam. ■Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations. ■Avoid contact with pins, leads, or circuitry. ■Turn off power and input signals before inserting or removing connectors or test equipment. Equipment guidelines Grounding equipment must include e ither a wrist strap or a foot strap at a grounded workstation. ■When seated, wear a wrist strap connected to a grounde d system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. On gr ounded mats with banana-plug connectors, use alligator clips to connect a wrist strap. ■When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at standing workstations and are compatible with most types of shoes or boots. On conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one megohm resistance between the operator and ground. To be effective, the conductive strips must be worn in contact with the skin. The following grounding equipment is recommended to prevent electrostatic damage: ■Antistatic tape ■Antistatic smocks, aprons, and sleeve protectors ■Conductive bins and other assembly or soldering aids ■Nonconductive foam ■Conductive tabletop workstations with ground cords of one megohm resistance ■Static-dissipative tables or floor mats with hard ties to the ground ■Field service kits ■Static awareness labels ■Material-handling packages ■Nonconductive plastic bags, tubes, or boxes ■Metal tote boxes ■Electrostatic voltage levels and protective materials The following table lists the shielding protectio n provided by antistatic bags and floor mats. Material Use Voltage protection level Antistatic plastic Bags 1,500 V Carbon-loaded plastic Floor mats 7,500 V Metallized laminate Floor mats 5,000 V