HP Pavilion 14 V000 Notebook Pc Series User Manual

							2.Plug the other end of the network cable into a network wall jack (2) or router.NOTE:If the network cable contains noise suppression circuitry (3), which prevents 
interference from TV and radio reception, orient the circuitry end of the cable toward the 
computer.Connecting to a wired network19  
						

							4Enjoying entertainment features
Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your 
music, and download and watch movies. Or, to make your computer an even more powerful 
entertainment center, connect external devices like a monitor, projector, or TV, or speakers and 
headphones.
Multimedia features
Here are some of the entertainment features on your computer.
ComponentDescription(1) Internal microphones (2)Record sound.(2) Webcam lightOn: The webcam is in use.(3) WebcamRecords video and captures photographs. Some models 
allow you to video conference and chat online using 
streaming video.
From the Start screen, type camera, and then select 
Camera from the list of applications.
(4) SpeakersProduce sound.(5) Optical driveDepending on your computer model, reads an optical 
disc or reads and writes to an optical disc.20Chapter 4   Enjoying entertainment features 
						

							ComponentDescriptionNOTE:For disc compatibility information, go to the Help 
and Support web page (see More HP resources on page 3). Follow the web page instructions to select 
your computer model. Select 
Drivers & Downloads, and 
then follow the on-screen instructions.
(6)USB 2.0 portConnects an optional USB device, such as a keyboard, 
mouse, external drive, printer, scanner or USB hub.(7)Audio-out (headphone)/Audio-in 
(microphone) jackConnects optional powered stereo speakers, 
headphones, earbuds, a headset, or a television audio 
cable. Also connects an optional headset microphone. 
This jack does not support optional microphone-only 
devices.WARNING!To reduce the risk of personal injury, adjust 
the volume before putting on headphones, earbuds, or a 
headset. For additional safety information, refer to the 
Regulatory, Safety, and Environmental Notices. To 
access this guide, from the Start screen, type support, 
and then select the 
HP Support Assistant app.
NOTE:When a device is connected to the jack, the 
computer speakers are disabled.NOTE:Be sure that the device cable has a 4-conductor 
connector that supports both audio-out (headphone) and 
audio-in (microphone).(8)USB 3.0 portsEach USB 3.0 port connects an optional USB device, 
such as a keyboard, mouse, external drive, printer, 
scanner or USB hub.(9)HDMI portConnects an optional video or audio device, such as a 
high-definition television, any compatible digital or audio 
component, or a high-speed HDMI device.(10)RJ-45 (network) jackConnects a network cable.
Using the webcam
The computer has an integrated webcam that records video and captures photographs. Some models 
may allow you to video conference and chat online using streaming video.
▲To start the webcam, from the Start screen, type camera, and then select Camera from the list 
of applications.
For details about using the webcam, go to Help and Support. From the Start screen, type help, and 
then select 
Help and Support.
Using audio
On your computer, or on select models using an external optical drive, you can play music CDs, 
download and listen to music, stream audio content from the web (including radio), record audio, or 
mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio 
devices such as speakers or headphones.
Using the webcam21 
						

							Connecting speakers
You can attach wired speakers to your computer by connecting them to a USB port or to the audio-out (headphone)/audio-in (microphone) jack on your computer or on a docking station.
To connect wireless speakers to your computer, follow the device manufacturer's instructions. To 
connect high-definition speakers to the computer, see 
Setting up HDMI audio on page 24. Before 
connecting speakers, lower the volume setting.
Connecting headphones and microphones
You can connect wired headphones or headsets to the audio-out (headphone)/audio-in (microphone) 
jack on your computer. Many headsets with integrated microphones are commercially available.
To connect wireless headphones or headsets to your computer, follow the device manufacturer's 
instructions.
WARNING!To reduce the risk of personal injury, lower the volume setting before putting on 
headphones, earbuds, or a headset. For additional safety information, see the 
Regulatory, Safety and 
Environmental Notices
. To access this guide, from the Start screen, type support, and then select 
the 
HP Support Assistant app.
Using Beats Audio
Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a 
clear sound. You can experience Beats Audio through the computer's internal speakers, through 
external speakers connected to a USB port, or through Beats Audio headphones connected to the 
headphone jack.
Accessing Beats Audio Control Panel
Use Beats Audio Control Panel to view and manually control audio and bass settings.
▲From Start screen, type control panel, select Control Panel, select Hardware and Sound, 
and then select 
Beats Audio Control Panel.
Enabling and disabling Beats Audio
▲To enable or disable Beats Audio, press the fn key in combination with the b key.
Testing your audio features
To check the audio functions on your computer, follow these steps:
1.From the Start screen, type control panel, and then select Control Panel.
2.Select Hardware and Sound, and then select Sound.
3.When the Sound window opens, select the Sounds tab. Under Program Events, select any 
sound event, such as a beep or alarm, and then click 
Test.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your computer, follow these steps:
1.From the Start screen, type sound, and then select Sound Recorder.
2.Click Start Recording and speak into the microphone.
22Chapter 4   Enjoying entertainment features  
						

							3.Save the file to your desktop.
4.Open a multimedia program and play the recording.
To confirm or change the audio settings on your computer, follow these steps:
1.From the Start screen, type control panel, and then select Control Panel.
2.Select Hardware and Sound, and then select Sound.
Using video
Your computer is a powerful video device that enables you to watch streaming video from your 
favorite websites and download video and movies to watch on your computer when you are not 
connected to a network.
To enhance your viewing enjoyment, use one of the video ports on the computer to connect an 
external monitor, projector, or TV.
IMPORTANT:Be sure that the external device is connected to the correct port on the computer, 
using the correct cable. Check the device manufacturer's instructions.
Connecting video devices by using an HDMI cable
NOTE:To connect an HDMI device to your computer, you need an HDMI cable, sold separately.
To see the computer screen image on a high-definition TV or monitor, connect the high-definition 
device according to the following instructions.
1.Connect one end of the HDMI cable to the HDMI port on the computer.
2.Connect the other end of the cable to the high-definition TV or monitor.
3.Press f4 to alternate the computer screen image between 4 display states:
●PC screen only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on both the computer and the external 
device.
Using video23   
						

							●Extend: View the screen image extended across both the computer and the external 
device.
●Second screen only: View the screen image on the external device only.
Each time you press f4, the display state changes.
NOTE:For best results, especially if you choose the “Extend” option, adjust the screen 
resolution of the external device, as follows. From the Start screen, type 
control panel, and 
then select 
Control Panel. Select Appearance and Personalization. Under Display, select Adjust 
screen resolution
.
Setting up HDMI audio
HDMI is the only video interface that supports high-definition video and audio. After you connect an 
HDMI TV to the computer, you can then turn on HDMI audio by following these steps:
1.From the Windows desktop, right-click the Speakers icon in the notification area, at the far right 
of the taskbar, and then select 
Playback devices.
2.On the Playback tab, select the name of the digital output device.
3.Click Set Default, and then click OK.
To return the audio stream to the computer speakers:
1.From the Windows desktop, right-click the Speakers icon in the notification area, at the far right 
of the taskbar, and then click 
Playback devices.
2.On the Playback tab, click Speakers.
3.Click Set Default, and then click OK.
Discovering and connecting to Miracast-compatible wireless displays (select 
AMD models only)
To discover and connect to Miracast-compatible wireless displays without leaving your current apps, 
follow the steps below.
To open Miracast:
▲Point to the upper-right or lower-right corner of the Start screen to display the charms, click 
Devices, click Project, and then follow the on-screen instructions.
– or –
From the Start screen, click the HP Quick Access to Miracast icon, and then follow the on-
screen instructions.
Discovering and connecting to Miracast-compatible wireless displays (select 
Intel models only)
Use Intel wireless display apps to wirelessly project individual files such as photos, music, or videos, 
or to duplicate your entire computer screen to a TV or a secondary display device.
Intel WiDi, a premium Miracast solution, makes it easy and seamless to pair your secondary display 
device; provides for full-screen duplication; and improves speed, quality, and scaling. Intel WiDi 
Media Share enables easy multitasking and provides tools to select and flick individual media files to 
your secondary display device.
Open the apps by following these steps:
24Chapter 4   Enjoying entertainment features  
						

							1.To open the Intel WiDi connection app, from the Start screen, type Intel WiDi. Follow the on-
screen instructions to pair your secondary display device and make display state choices. Use 
the 
WiDi Connect function to initiate a connection.
2.To open the Intel Media Share app, from the Start screen, type Intel WiDi Media Share. 
Follow the on-screen instructions to flick and share your media files to a secondary display 
device.
Using video25 
						

							5Navigating the screen
You can navigate the computer screen in the following ways:
●Touch gestures
●Keyboard and mouse
Touch gestures can be used on your computer's TouchPad or on a touch screen (select models 
only).
NOTE:An external USB mouse (purchased separately) can be connected to one of the USB ports 
on the computer.
Select computer models have special action keys or hot key functions on the keyboard to perform 
routine tasks.
Using the TouchPad and gestures
The TouchPad allows you to navigate the computer screen and control the pointer by using simple 
finger movements. You can customize the touch gestures by changing settings, button configurations, 
click speed, and pointer options. You can also view demonstrations of TouchPad gestures.
From the Start screen, type control panel, select Control Panel, and then select Hardware and 
Sound
. Under Devices and Printers, select Mouse.
TIP:Use the left and right buttons on the TouchPad as you would use the corresponding buttons on 
an external mouse.NOTE:TouchPad gestures are not supported in all apps.26Chapter 5   Navigating the screen    
						

							Tapping
To make an on-screen selection, use the tap function on the TouchPad.
●Point to an item on the screen, and then tap one finger on the TouchPad zone to make a selection. Double-tap an item to open it.
Using the TouchPad and gestures27 
						

							Scrolling
Scrolling is useful for moving up, down, or sideways on a page or image.
●Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or right.
28Chapter 5   Navigating the screen