HP Pavilion 10 N000 X2 Detachable Pc User Manual

							Lights
Component Description
(1)  Caps lock light On: Caps lock is on, which switches the keys to all capital
letters.
(2)  Mute light
●Amber: Computer sound is off.
●Off: Computer sound is on.
Keyboard base components 11 
						

							TouchPad
Component Description
(1)  TouchPad zone Reads your finger gestures to move the pointer or activate
items on the screen.
(2)  Left control zone Textured area that allows you to perform additional
gestures.
NOTE:For more information on additional gestures, see
Using the TouchPad and touch screen gestures
on page 22.
(3)  Right control zone Textured area that allows you to perform additional
gestures.
NOTE:For more information on additional gestures, see
Using the TouchPad and touch screen gestureson page 22.
12 Chapter 3   Using the keyboard base 
						

							Connecting the tablet to the keyboard base
●To connect the tablet to the keyboard base, insert the tablet docking port into the keyboard base
docking connector.
●To remove the tablet from the keyboard base, lift one corner (1) of the tablet to release it.
Connecting the tablet to the keyboard base 13 
						

							4 Connecting to a network
Your computer can travel with you wherever you go. But even at home, you can explore the globe
and access information from millions of websites using your computer and a wired or wireless
network connection. This chapter will help you get connected to that world.
Connecting to a wireless network
Your computer may be equipped with one or more of the following wireless devices:
●WLAN device—Connects the computer to wireless local area networks (commonly referred to as
Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places
such as airports, restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile
wireless device in your computer communicates with a wireless router or a wireless access
point.
●Bluetooth device—Creates a personal area network (PAN) to connect to other Bluetooth-
enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a
PAN, each device communicates directly with other devices, and devices must be relatively
close together—typically within 10 meters (approximately 33 feet) of each other.
For more information about wireless technology, the Internet, and networking, see the information
and website links provided in Help and Support.
▲From the Start screen, type help, and then select Help and Support.
Using the wireless controls
You can control the wireless devices in your computer using one or more of these features:
●Wireless button or wireless key (also called the airplane mode key) (referred to in this chapter as
the wireless button)
●Operating system controls
Wireless button
The computer has a wireless button and one or more wireless devices. All the wireless devices on
your computer are enabled at the factory.
NOTE:Because the wireless devices are enabled at the factory, you can use the wireless button to
turn on or turn off all the wireless devices simultaneously.
Operating system controls
The Network and Sharing Center allows you to set up a connection or network, connect to a network,
and diagnose and repair network problems.
To use operating system controls:
1.From the Start screen, type control panel, and then select Control Panel.
‒ or –
14 Chapter 4   Connecting to a network 
						

							From the Windows desktop, right-click or tap and hold the Start button, and then select Control
Panel.
2.Select Network and Internet, and then select Network and Sharing Center.
For more information, see the information provided in Help and Support.
▲From the Start screen, type help, and then select Help and Support.
Connecting to a WLAN
NOTE:When you are setting up Internet access in your home, you must establish an account with
an Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP.
The ISP will help set up the modem, install a network cable to connect your wireless router to the
modem, and test the Internet service.
To connect to a WLAN, follow these steps:
1.Be sure that the WLAN device is on.
2.From the Start screen or the Windows desktop, point to the upper-right or lower-right corner of
the screen to reveal the charms.
3.Select Settings, and then select the network status icon.
4.Select your WLAN from the list.
5.Select Connect.
If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the
code, and then select Next to complete the connection.
NOTE:If no WLANs are listed, you may be out of range of a wireless router or access point.
NOTE:If you do not see the WLAN you want to connect to, from the Windows desktop, right-
click or tap and hold the network status icon, and then select Open Network and Sharing Center.
Select Set up a new connection or network. A list of options is displayed, allowing you to
manually search for and connect to a network or to create a new network connection.
6.Follow the on-screen instructions to complete the connection.
After the connection is made, place the mouse pointer over the network status icon in the notification
area, at the far right of the taskbar, to verify the name and status of the connection.
NOTE:The functional range (how far your wireless signals travel) depends on WLAN
implementation, router manufacturer, and interference from other electronic devices or structural
barriers such as walls and floors.

						

							●Mouse
●External keyboard
Bluetooth devices provide peer-to-peer capability that allows you to set up a PAN of Bluetooth
devices. For information about configuring and using Bluetooth devices, see the Bluetooth software
Help.
Sharing data and drives and accessing software
When your computer is part of a network, you are not limited to using only the information that is
stored in your computer. Computers connected to the network can exchange software and data with
each other.
For more information about sharing files, folders, or drives, see the information provided in Help and
Support.
▲From the Start screen, type help, and then select Help and Support.
NOTE:When a disc like a DVD movie or game is copy-protected, it cannot be shared.
16 Chapter 4   Connecting to a network 
						

							5 Enjoying entertainment features
Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your
music, and download and watch movies. Or, to make your computer an even more powerful
entertainment center, connect external devices like a monitor, projector, TV, speakers, or
headphones.
Using a webcam
Your computer has an integrated webcam that records video and captures photographs. Some
models may allow you to video conference and chat online using streaming video.
▲To start the webcam, from the Start screen, type camera, and then select Camera from the list
of applications.
Using audio
On your computer, or on select models using an external optical drive, you can play music CDs,
download and listen to music, stream audio content from the web (including radio), record audio, or
mix audio and video to create multimedia. To enhance your listening enjoyment, attach external audio
devices such as speakers or headphones.
Connecting speakers
You can attach wired speakers to your computer by connecting them to a USB port or to the audio-
out (headphone) jack on your computer or on a docking station.
To connect wireless speakers to your computer, follow the device manufacturer's instructions. To
connect high-definition speakers to the computer, see 
Setting up HDMI audio on page 20. Before
connecting speakers, lower the volume setting.
Connecting headphones
WARNING!To reduce the risk of personal injury, lower the volume setting before putting on
headphones, earbuds, or a headset. For additional safety information, see the 
Regulatory, Safety and
Environmental Notices
. To access this document, from the Start screen, type support, and then
select the HP Support Assistant app.
You can connect wired headphones to the headphone jack or to the audio-out (headphone)/audio-in
(microphone) combo jack on your computer.
To connect wireless headphones to your computer, follow the device manufacturer's instructions.
Connecting a microphone
To record audio, connect a microphone to the microphone jack on the computer. For best results
when recording, speak directly into the microphone and record sound in a setting free of background
noise.
Using a webcam 17 
						

							Connecting headsets 
WARNING!To reduce the risk of personal injury, lower the volume setting before putting on
headphones, earbuds, or a headset. For additional safety information, see the 
Regulatory, Safety and
Environmental Notices
. To access this document, from the Start screen, type support, and then
select the HP Support Assistant app.
Headphones combined with a microphone are called headsets. You can connect wired headsets to
the audio-out (headphone)/audio-in (microphone) jack on your computer.
To connect 
wireless headsets to your computer, follow the device manufacturer's instructions.
Using Bang & Olufsen audio (select models only)
Bang & Olufsen audio is an enhanced audio feature that provides a deep, controlled bass while
maintaining a clear sound. You can experience Bang & Olufsen through the computer's internal
speakers or through audio headphones connected to the headphone jack.
Accessing Audio Control Panel
Use Bang & Olufsen Audio Control Panel to view and manually control audio and bass settings.
1.From the Start screen, type control panel, select Control Panel, select Hardware and
Sound, and then select Bang & Olufsen Audio Control Panel.
‒ or –
From the Windows desktop, right-click or tap and hold the Start button, and then select Control
Panel.
2.Select Hardware and Sound, and then select Bang & Olufsen Audio Control Panel.
Using B&O Play audio (select models only)
B&O Play audio is an enhanced audio feature that provides a deep, controlled bass while maintaining
a clear sound. You can experience B&O Play audio through the computer's internal speakers or
through audio headphones connected to the audio-out (headphone)/audio-in (microphone) combo
jack.
Accessing Audio Control Panel
Use B&O Play Audio Control Panel to view and manually control audio and bass settings.
▲From the Start screen, type control panel, select Control Panel, select Hardware and
Sound, and then select B&O Play Control Panel.
‒ or –
From the Windows desktop, right-click or tap and hold the Start button, and then select Control
Panel. Select Hardware and Sound, and then select B&O Play Control Panel.
Using sound settings
Sound settings control volume, sounds applied to programs, speakers, microphones, headsets, and
other audio features on your computer.
18 Chapter 5   Enjoying entertainment features 
						

							To view or change the volume:
1.From the Start screen, type control panel, and then select Control Panel.
–or–
From the Windows desktop, right-click or tap and hold the Start button, and then select Control
Panel.
2.Select Hardware and Sound.
3.Under Sound, select Adjust system volume, and then follow the on-screen instructions.
To view or change sound settings:
1.From the Start screen, type control panel, and then select Control Panel.
–or–
From the Windows desktop, right-click or tap and hold the Start button, and then select Control
Panel.
2.Select Hardware and Sound.
3.Select Sound, and then follow the on-screen instructions.
For more information about the audio features on your computer, refer to Help and Support.
▲From the Start screen, type help, and then select Help and Support.
Using video
Your computer is a powerful video device that enables you to watch streaming video from your
favorite websites and download video and movies to watch on your computer when you are not
connected to a network.
To enhance your viewing enjoyment, use one of the video ports on the computer to connect an
external monitor, projector, or TV.
IMPORTANT:Be sure that the external device is connected to the correct port on the computer,
using the correct cable. Follow the device manufacturer's instructions.
For information on using your video features, refer to Help and Support.
Connecting video devices using an HDMI cable (select models only)
NOTE:To connect an HDMI device to your computer, you need an HDMI cable, purchased
separately.
To see the computer screen image on a high-definition TV or monitor, connect the high-definition
device according to the following instructions:
1.Connect one end of the HDMI cable to the HDMI port on the computer.
Using video 19 
						

							2.Connect the other end of the cable to the high-definition TV or monitor.
3.Press f4 to alternate the computer screen image between 4 display states:
●Computer only: View the screen image on the computer only.
●Duplicate: View the screen image simultaneously on both the computer and the external
device.
●Extend: View the screen image extended across both the computer and the external
device.
●External screen only: View the screen image on the external device only.
Each time you press f4, the display state changes.
NOTE:For best results, especially if you choose the "Extend" option, increase the screen
resolution of the external device, as follows. From the Start screen, type control panel, and
then select Control Panel. Select Appearance and Personalization. Under Display, select Adjust
screen resolution.
Setting up HDMI audio
HDMI is the only video interface that supports high-definition video and audio. After you connect an
HDMI TV to the computer, you can then turn on HDMI audio by following these steps:
1.From the Windows desktop, right-click or tap and hold the Speakers icon in the notification area,
at the far right of the taskbar, and then select Playback devices.
2.On the Playback tab, select the name of the digital output device.
3.Select Set Default, and then select OK.
To return the audio stream to the computer speakers:
1.From the Windows desktop, right-click or tap and hold the Speakers icon in the notification area,
at the far right of the taskbar, and then select Playback devices.
2.On the Playback tab, select Speakers.
3.Select Set Default, and then select OK.
20 Chapter 5   Enjoying entertainment features