HP OfficeJet Pro K850 User Manual

							10
Regulatory information
This section provides regulatory information for the printer.
ENWW123
 
						

							FCC statement
The United States Federal Communications Commission (in 47 cfr 15.105) has specified that the
following notices be brought to the attention of users of this product.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Shielded cables
Use of a shielded data cable is required to comply with the Class B limits of Part 15 of the FCC Rules.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not
expressly approved by the Hewlett-Packard Company, may cause harmful interference and
void the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV technician for help.
124 Chapter 10   Regulatory information ENWW
 
						

							EMI statement (Korea)
ENWWEMI statement (Korea) 125
 
						

							VCCI statement (Japan)
126 Chapter 10   Regulatory information ENWW
 
						

							Regulatory model number
For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SNPRC-0504. The regulatory number should not be
confused with the product name (HP Officejet Pro K850/K850dn Color Printer) or product number
(C8177A and C8178A).
ENWWRegulatory model number 127
 
						

							Power cord statement
The power cord cannot be repaired. If it is defective, it should be discarded or returned to the supplier.
128 Chapter 10   Regulatory information ENWW
 
						

							Declaration of conformity
Manufacturers Name:Hewlett-Packard Singapore (Pte) Ltd
Manufacturers Address:Imaging and Printing Manufacturing Operations Singapore
60 Alexandra Terrace, #07-01, The Comtech, Singapore 118502
declares, that the product
Product Name:
HP Officejet Pro K850/K850dn Color Printer
Product Number:C8177A and C8178A
Regulatory Model Number(1):SNPRC-0504
Product Accessory Number:C8258A / HP Automatic two-sided printing accessory
Product Options:All
Conforms to the following Product Specifications:
Safety:
IEC 60950:1999 / EN 60950:2000EN 60825-1:1994+A1:2002
EMC:CISPR 22:1997 / EN 55022:1998 Class B (2)(3) CISPR 24:1997 + A1 / EN
55024:1998 + A1
IEC 61000-3-2:2000 / EN 61000-3-2:2000 IEC 61000-3-3:1994 +A1 / EN
61000-3-3:1995 + A1
FCC Title 47 CFR, Part 15 Class B / VCCI-2 
(2) ICES-003 Issue 4
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/
EEC, and carries the CE marking accordingly.
(1) This product is assigned a Regulatory model number that stays with the regulatory aspects of the design. The
Regulatory Model Number is the main product identifier in the regulatory documentation and test reports, this number
should not be confused with the marketing name or the product numbers.
(2) The product was tested in a typical configuration with Hewlett Packard personal computer systems.
(3) Excepting clause 9.5 which was not applied.
Singapore, 16 August 2004
Chan Kum Yew
Director, Quality
Local Contact for regulatory topics only:
European Contact: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
USA Contact: Hewlett-Packard Company, HPCC, 20555 S.H. 249 Houston, Texas, 77070
Australia Contact: Hewlett Packard Australia Ltd, Product Regulations Manager, 31-41 Joseph Street, Blackburn, Victoria
3130, Australia.
ENWWDeclaration of conformity 129
 
						

							Environmental sustainability program
Hewlett-Packard is committed to providing quality products in an environmentally sound manner. HP
continuously improves the design processes of its products to minimize the negative impact on the
office environment and on the communities where products are manufactured, shipped, and used.
HP has also developed processes to minimize the negative impact of the disposal of the product at
the end of its printing life.
For more information about the HP environmental sustainability program, see 
www.hp.com/hpinfo/
globalcitizenship/environment/index.html.
Reduction and elimination
Paper use
The two-sided (duplex) printing and N-up printing features of this product (which you can use to print
multiple pages of a document on one sheet of paper) can reduce paper usage and the resulting
demands on natural resources. For more information about using these features, see this guide.
Ink use
The Draft mode of this product uses less ink, which might extend the life of the cartridges. For more
information, see the printer driver onscreen Help.
Ozone-depleting chemicals
Ozone-depleting chemicals, such as chlorofluorocarbons (CFCs), have been eliminated from HP
manufacturing processes.
Power consumption
This product qualifies for ENERGY STAR® (version 3.0), which is a voluntary program to encourage
the development of energy-efficient office products.
ENERGY STAR® and the ENERGY STAR mark are U.S. registered marks. As an ENERGY STAR®
Partner, Hewlett-Packard Company has determined this product meets ENERGY STAR® guidelines
for energy efficiency. For more information, see 
www.energystar.gov.
Material safety data sheets
Material safety data sheets (MSDSs) can be obtained from the following HP website: www.hp.com/
go/msds.
130 Chapter 10   Regulatory information ENWW
 
						

							Recycling
Design for recycling has been incorporated into this product:
●The number of materials has been kept to a minimum while ensuring proper functionality and
reliability.
●Dissimilar materials have been designed to separate easily.
●Fasteners and other connections are easy to locate, gain access to, and remove by using
common tools.
●High-priority parts have been designed so that you can reach them quickly for efficient
disassembly and repair.
Product packaging
The packaging materials for this product have been selected to provide maximum protection for the
least cost possible, while attempting to minimize environmental impact and facilitate recycling. The
rugged design of the product assists in minimizing both packaging materials and damage rates.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of the products life.
Disposal of waste equipment by users in private households in the European
Union
This symbol on the product or on its packaging indicates that this product must not be disposed of
with your other household waste. Instead, it is your responsibility to dispose of your waste equipment
by handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
HP products and supplies
HPs Planet Partners™ recycling service provides an easy way to recycle any brand of computer
equipment or HP printing supplies. HPs state-of-the-art processes ensure that your unwanted
hardware or HP printing supply is recycled in a way that conserves resources. For more information,
see 
www.hp.com/recycle.
ENWW Environmental sustainability program 131
 
						

							132 Chapter 10   Regulatory information ENWW