HP LaserJet P3005dn User Manual

ItemValuesExplanation
ONJOB: The clearable warning message appears until the end of
the job that generated the message.
ON : The clearable warning message appears until you
press 
.
The default setting is  JOB.
AUTO CONTINUEOFF
ONDetermines how the device reacts to errors. If the device is on
a network, you probably want to turn  AUTO CONTINUE to
ON .
ON : If an error occurs that prevents printing, the message
appears on the device control-panel display, and the device
goes offline for 10 seconds before...

ItemValuesExplanation
The default setting is AUTO.
RAM DISKAUTO
OFFDetermines how the RAM disk is configured. 
AUTO : Allows the device to determine the optimal RAM-disk
size based on the amount of available memory.
OFF : The RAM is disabled.
NOTE If you change the setting from  OFF to
AUTO , the device automatically reinitializes when it
becomes idle.
The default setting is  AUTO.
LANGUAGE (DEFAULT)
SeveralSelects the language for the messages that appear on the
device control-panel display.
The...

I/O submenu
Items on the I/O (input/output) menu affect the communication between the device and the computer.
If the device contains an HP Jetdirect print server , you can configure basic networking parameters by
using the submenu. These and other parameters can also be configured through HP Web Jetadmin
(see 
Use HP Web Jetadmin software ) or other network configuration tools, such as the embedded Web
server (see 
Use the embedded Web server ).
ItemValuesExplanation
I/O TIMEOUT5 to 300Select the I/O...

Resets submenu
Items on the Resets submenu relate to returning settings to the defaults and changing settings such as
Sleep mode.
ItemValuesExplanation
RESTORE FACTORY
SETTINGSThere is no value to select.Performs a simple reset and restores most of the factory
(default) and network settings. This item also clears the input
buffer for the active I/O.
CAUTION Restoring factory settings during a print
job cancels the print job.
SLEEP MODE ON
OFFTurns Sleep mode on or off. Using Sleep mode offers the...

Diagnostics menu
Administrators can use this submenu to isolate parts and to troubleshoot jam and print-quality issues.
ItemValuesExplanation
PRINT EVENT LOGThere is no value to select.Press  to generate a list of the 50 most recent entries in the
event log. The printed event log shows error number, page
count, error code, and description or personality.
SHOW EVENT LOGThere is no value to select.Press  to scroll through the contents of the event log at the
device control panel, which lists up to the 50...

Change device-control-panel configuration settings
By using the device control panel,  you can make changes to general device configuration default settings
such as tray size and type, sleep delay, devi ce personality (language), and jam recovery.
The device-control-panel settings can also be chan ged from a computer by using the setting page of
the embedded Web server. The computer shows the same information that the control panel shows.
For more information, see 
Use the embedded Web server ....

5.Press  or  to select the desired option, and then press .
6. Press  Menu to exit the menu.
Tray-behavior options
Four user-defined options are  available for tray behavior: 
● USE REQUESTED TRAY
. Selecting EXCLUSIVELY  ensures that the device does not
automatically select another tray  when you indicate that a specific tray should be used.
Selecting  FIRST allows the device to pull from a second tray if the specified tray is empty.
EXCLUSIVELY  is the default setting.
● MANUALLY FEED PROMPT
. If you...

Set the Sleep Delay
1.Press  Menu to open the menus.
2. Press 
 to highlight  CONFIGURE DEVICE , and then press .
3. Press 
 to highlight  SYSTEM SETUP , and then press .
4. Press 
 to highlight  SLEEP DELAY , and then press .
5. Press 
 or  to select the appropriate time period, and then press .
6. Press  Menu to exit the menu.
Turn the Sleep mode on or off
1. Press  Menu to open the menus.
2. Press 
 to highlight  CONFIGURE DEVICE , and then press .
3. Press 
 to highlight  RESETS, and then press .
4....

Clearable warnings
Use this feature to determine the display time of control-panel clearable warnings by selecting ON or
JOB . The default value is  JOB.
● ON
: Clearable warnings appear until you press 
.
● JOB
: Clearable warnings appear until the end of  the job for which they were generated.
Set the clearable warnings
1. Press  Menu to open the menus.
2. Press 
 to highlight  CONFIGURE DEVICE , and then press .
3. Press 
 to highlight  SYSTEM SETUP , and then press .
4. Press 
 to highlight...

Set supplies-low reporting
1.Press  Menu to open the menus.
2. Press 
 to highlight  CONFIGURE DEVICE , and then press .
3. Press 
 to highlight  SYSTEM SETUP , and then press .
4. Press 
 to highlight  CARTRIDGE LOW , and then press .
5. Press 
 or  to select the appropriate setting, and then press .
6. Press  Menu to exit the menu.
Cartridge-out response
The device has two options for this menu item.
●Select 
CONTINUE  to allow the device to continue printing. A  REPLACE CARTRIDGE warning
message...