HP LaserJet P2015n User Manual

Paper handling
Use the HP ToolboxFX paper-handling options to configure your default settings.
Three options are available for handling print jobs when the product is out of media:
●Select 
Wait For Paper To Be Loaded .
● Select 
Cancel  from the  Paper out action  drop-down list to cancel the print job.
● Select 
override  from the  Paper out time  drop-down list to send the print job to another paper tray.
The  Paper out time  field specifies how long the printer waits before acting on your...

System setup
Use the HP ToolboxFX system settings options to configure miscellaneous print settings.
NOTEYou must click  Apply to save your changes.
Service
During the printing process, paper, toner, and dust particles can accumulate inside the printer. Over
time, this buildup can cause print-quality problems such as toner specks or smearing. HP ToolboxFX
provides an easy method for cleaning the paper path. For more information, see 
Clean the printer media
path.
Print settings
The HP ToolboxFX Print...

PostScript
Use the PostScript option when you are using the HP postscript level 3 emulation print personality. When
the Print PostScript Errors  option is turned on, the HP postscript level 3 emulation error page
automatically prints when HP postscript level 3 emulation errors occur.
NOTE You must click  Apply to save your changes.
Network settings
The network administrator can use the HP ToolboxFX  Network Settings folder to control the network-
related settings for the printer when it is connected to...

Embedded Web server
The embedded Web server allows you to view printer and network status and to manage printing
functions from your computer instead of from the printer control panel. Below are examples of what you
can do using the embedded Web server:
●View printer status information
● View and print internal pages
● Determine the remaining life on all supplies and order new ones
● Set the size and type of media loaded in each tray
● View and change tray configurations
● View and change the printer...

HintAfter you open the URL, bookmark it so that you can return to it quickly in the future.
The embedded Web server has three tabs that contain settings and information about the printer: the
Status  tab, the  Settings  tab, and the  Networking tab.
Status tab
The Status pages group consists of the following pages.
●Device Status
. This page displays the status of the printer and HP supplies.
● Device Configuration
. This page shows the information found on the printer Configuration
page.
● Supplies...

Links
Links are located in the upper-right part of the Status pages. You must have Internet access in order to
use any of these links. If you use a dial-up connection and did not connect when you first opened the
embedded Web server, you must connect before you can visit these Web sites. Connecting might
require that you close the embedded Web server and reopen it.
●Order Supplies
. Click this link to connect to the Sure Supply Web site and order genuine
HP supplies from HP or a reseller of your...

Replace the print cartridge
1.Press the print-cartridge-door button, and then remove the print cartridge from the printer. For
recycling information, see the inside of the print-cartridge box.
CAUTION To prevent damage, do not expose the print cartridge to light. Cover it with a
piece of paper.
2. Remove the new print cartridge from the packaging.
3. Bend the tab on the left side of the cartridge to break it loose.
4.Pull the tab until all the tape is removed from the cartridge. Put the tab in the...

5.Gently rock the toner cartridge from front to back to distribute the toner evenly inside the cartridge.
6.Insert the print cartridge in the printer and close the print-cartridge door.
CAUTION If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing
in cold water.  Hot water sets toner into the fabric .
58 Chapter 6   Managing and maintenance ENWW
 

Redistribute toner
When toner is low, faded or light areas appear on the printed page. You might be able to temporarily
improve print quality by redistributing the toner.
1.Open the print-cartridge-door button, and then remove the print cartridge from the printer.
CAUTION To prevent damage, do not expose the print cartridge to light. Cover it with a
sheet of paper.
2. To redistribute the toner, gently rock the print cartridge from front to back.
CAUTION If toner gets on your clothing, wipe it off with a...

Clean the printer
Clean the outside of the printer with a clean, damp cloth when necessary.
CAUTIONDo not use ammonia-based cleaners on or around the printer.
During the printing process, paper, toner, and dust particles can accumulate inside the printer. Over
time, this buildup can cause print quality problems, such as toner specks or smearing, and paper jams.
To correct and prevent these types of problems, you can clean the print cartridge area and the printer
media path.
Clean the print-cartridge...