HP LaserJet Enterprise P3015d User Manual

Use features in the Macintosh printer driver
Create and use printing presets in Macintosh
Use printing presets to save the current printer driver settings for reuse.
Create a printing preset 1.On the File  menu, click  Print.
2. Select the driver.
3. Select the print settings.
4. In the  Presets  box, click  Save As..., and type a name for the preset.
5. Click  OK.
Use printing presets 1.On the File  menu, click  Print.
2. Select the driver.
3. In the  Presets  box, select the printing preset that you...

Use watermarks
A watermark is a notice, such as “Confidential,” that is printed in the background of each page of a
document.
1.On the File  menu, click  Print.
2. Open the  Watermarks  menu.
3. Next to  Mode, select the type of watermark to use. Select Watermark  to print a semi-transparent
message. Select  Overlay to print a message that is not transparent.
4. Next to  Pages, select whether to print the watermark on all pages or on the first page only.
5. Next to Text , select one of the standard...

Print on both sides of the page (duplex printing)
Use automatic duplex printing1.Insert enough paper into one of the trays to accommodate the print job. If you are loading special
paper such as letterhead, load it in one of the following ways:
●For Tray 1, load the letterhead paper face-up with the top edge feeding into the product first.
● For all other trays, load the letterhead paper face-down with the top edge at the front of the
tray.
2. On the File  menu, click  Print.
3. Open the  Layout menu.
4....

Select which option to use if another stored job already has that name.
Use Job Name + (1 - 99)Append a unique number to the end of the job name.
Replace Existing FileOverwrite the existing stored job with the new one.
5.If you selected the Stored Job  or Personal Job option in step 3, you can protect the job with a
PIN. Type a 4-digit number in the  Use PIN to Print field. When other people attempt to print this
job, the product prompts them to enter this PIN number.
Use the Services menu
If the product...

5 Connectivity
●USB connection
●
Network configuration
ENWW 63
 

USB connection
This product supports a USB 2.0 connection. You must use an A-to-B type USB cable that is no longer
than 2 meters (6.56 feet).
64 Chapter 5   Connectivity ENWW
 

Network configuration
You might need to configure certain network parameters on the product. You can configure these
parameters from the control panel, the embedded Web server, or for most networks, from the HP Web
Jetadmin software.
For a complete list of supported networks and for instructions on configuring network parameters from
software, see the HP Jetdirect Embedded Print Server Administrator’s Guide. The guide comes with
products in which an HP Jetdirect embedded print server is installed....

Service nameDescription
LLMNR (Link Local Multicast Name Resolution)Specifies if the product responds to LLMNR requests over IPv4
and IPv6.
TFTP ConfigurationAllows you to use TFTP to download a configuration file
containing additional configuration parameters, such as SNMP
or non-default settings, for an HP Jetdirect print server.
Table 5-4   IP addressing
Service nameDescription
DHCP (Dynamic Host Configuration Protocol)For automatic IP address assignment. The product supports
IPv4 and IPv6. The DHCP...

Configure the network product
View or change network settings
Use the embedded Web server to view or change IP configuration settings.
1.Print a configuration page, and locate the IP address.
●If you are using IPv4, the IP address contains only digits. It has this format:
xxx.xxx.xxx.xxx
● If you are using IPv6, the IP address is a hexadecimal combination of characters and digits.
It has a format similar to this:
xxxx::xxxx:xxxx:xxxx:xxxx
2. To open the embedded Web server, type the IP address into the...

Manually configure IPv4 TCP/IP parameters from the control panel
Use the control-panel menus to manually set an IPv4 address, subnet mask, and default gateway.
1.Press the  Menu button 
.
2. Open each of the following menus. Press the down arrow 
 to highlight it and then press the  OK
button to select it.
a. CONFIGURE DEVICE
b. I/O
c. EMBEDDED JETDIRECT MENU
d. TCP/IP
e. IPV4 SETTINGS
f. CONFIG METHOD
g. MANUAL
h. MANUAL SETTINGS
i. IP ADDRESS , SUBNET MASK , or DEFAULT GATEWAY
3. Use the numeric...