HP LaserJet Enterprise P3015d User Manual

Use paper output options 
Print to the top (standard) output bin
The top output bin collects paper face-down, in the correct order. The top output bin should be used for
most print jobs, including transparencies. To use the top output bin, be sure that the rear output bin is
closed. To avoid jams, do not open or close the rear output bin while the product is printing.
1
Print to the rear output bin
The product always prints to the rear output bin if it is open. Paper that is printed to this bin will exit...

90 Chapter 6   Paper and print mediaENWW
 

7 Use product features
●Economy settings
●
Use job-storage features
●
Walk-up USB printing
ENWW 91
 

Economy settings
EconoMode
This product has an EconoMode option for printing drafts of documents. Using EconoMode can use
less toner and decrease the cost per page. However, using EconoMode can also reduce print quality.
HP does not recommend full-time use of EconoMode. If EconoMode is used full-time, the toner supply
might outlast the mechanical parts in the print cartridge. If print quality begins to degrade under these
circumstances, you will need to install a new print cartridge, even if there is...

Sleep delay
The adjustable sleep mode feature reduces power consumption when the product has been inactive for
an extended period. You can set the length of time before the product enters sleep mode. The default
setting is 30 MINUTES .
NOTE:The product display dims when the product is in sleep mode. This mode does not affect product
warm-up time.
Set sleep delay
1. Press the  Menu button .
2. Open each of the following menus. Press the down arrow 
 to highlight it and then press the  OK
button to select...

Wake time
The wake time feature allows you to instruct the product to wake at a certain time on selected days, to
eliminate waiting for the warm-up and calibration periods. You must have the SLEEP MODE setting on
to set the wake time.
NOTE: Make sure that the real-time clock is set to the correct date and time before you set the wake
time.
Set the real-time clock
Use the real-time clock feature to set the date and time settings. The date and time information is
attached to stored print jobs, so you can...

5.Use the numeric keypad, or press the up arrow or down arrow / to select the hour, minutes, and
the AM or PM setting. Press the  OK button after each selection.
6. Press the  OK button to enter the  APPLY TO ALL DAYS  menu.
7. Press the up arrow or down arrow 
/ to select the  YES or the NO  setting, and then press the
OK  button.
8. If you select NO , use the up arrow or down arrow 
/ to set the WAKE TIME  setting for the other
days of the week, and then press the OK  button to accept each selection....

Use job-storage features
The following job-storage features are available for print jobs:
●Proof and hold jobs
: This feature provides a quick way to print and proof one copy of a job and
then print the additional copies from the control panel.
● Personal jobs
: When you send a private job to the product, the job does not print until you provide
the required personal identification number (PIN) at the control panel.
● Quick Copy jobs
: Print the requested number of copies of a job and then store a copy...

5.If the job requires a PIN, use the numeric keypad, or press the up arrow  or the down arrow  to
enter the PIN, and then press the  OK button.
NOTE: If you use the up arrow  or the down arrow  to enter the PIN, press the  OK button after
each digit.
6. To print the number of copies specified in the driver when the job was stored, press the  OK button.
-or-
To print a different number of copies than you specified in the driver when you stored the job, use
the numeric keypad, or press the up arrow 
 or...

Walk-up USB printing
This product features walk-up USB printing, so you can quickly print files without sending them from a
computer. The product accepts standard USB storage accessories in the USB port on the front of the
product. You can print the following types of files:
●.PDF
● .PCL
● .PS
1. Insert the USB storage accessory into the USB port on the front of the product.
2
1
3
2
1
3
2.The USB STORAGE  menu opens. Press the up arrow  or the down arrow  to highlight the folder
name or the job name, and...