HP Laserjet 5 User Manual

US Only: This HP LaserJet printer design facilitates
recycling of:
•Toner Cartridges
Each HP toner cartridge box sold in the U.S. contains instructions
and a shipping label for returning the cartridge to HP for recycling.
HP pays the postage.
•Printer and Parts
HP’s Hardware Recycling Organization will take back this printer
and other HP products when you have no further use for them.  HP
disposes of these products in an environmentally-sound manner.
Many of the functional parts are recovered, tested,...

Regulatory Information
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no...

VCCI Statement (Japan)
The VCCI statement, similar to the FCC regulations, is required in Japan.
Safety Information
Laser Safety
The Center for Devices and Radiological Health (CDRH) of the U.S.
Food and Drug Administration has implemented regulations for laser
products manufactured since August 1, 1976. Compliance is mandatory
for products marketed in the United States. This printer is certified as a
“Class 1” laser product under the U.S. Department of Health and
Human Services (DHHS) Radiation...

Laser Statement for Finland
LASERTURVALLISUUS
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
HP LaserJet 5/5M laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite. Normaalissa käytössä
kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen ulkopuolelle.
Kirjoittimen on hyväksynyt Suomessa laserturvallisuuden osalta Sähkötarkastuskeskus. Laitteen turvallisuusluokka
on määritetty valtioneuvoston päätöksen N:o 472/1985 ja standardin EN 60825 (1991) mukaisesti.
VAROITUS !
Laitteen...

DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:Hewlett-Packard Company
Manufacturer’s Address: 11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
declares that the product Product Name: LaserJet 5 and LaserJet 5M
Model Number: C3916A and C3917A
Product Options: All
conforms to the following Product Specifications:
Safety: IEC 950:1991+A1+A2/EN 60950:1992+A1+A2
IEC 825:1984+A1/EN 60825:1989 Class 1
EMC: CISPR-22:1993 / EN 55022:1994 class B
1
CISPR-22:1993 / EN...

C-10 Specifications & Regulatory InformationEN 

D
Printer Memory
Determining Needed Printer Memory
The amount of printer memory you need depends on what you are
printing and the printer language you are using. For example, PCL is
compact and efficient, so you can print most text and graphics at 600 dpi
without adding memory to your printer. You might want to add memory
to your printer if you commonly print complex graphics, use many
downloaded typefaces, or print complex documents in PostScript. The
table below shows the printers’ standard memory and...

How Your Printer Uses Memory
Your printer uses memory in several ways:
•Stores the printer’spersonalityor operating language software (such as
PCL and PostScript).
•Receives, holds, and processes data from incoming print jobs.
•Manages downloaded resources (such as symbol sets, macros, and patterns
or PostScript fonts, forms, and patterns when PostScript is installed).
Optional Flash SIMM
The Optional Flash SIMM can be used to permanently store
downloaded fonts and forms in the printer.  Unlike the...

Keeping Downloaded Resources in Memory
When only the PCL personality is installed, the printer uses all available
memory to maintain downloaded resources. When two or more
personalities are installed, the printer reserves a portion of memory for
each personality’s resources. The printer deletes downloaded resources
from its memory when you change personalities or resolutions.
For printers with more than one personality, Resource Saving enables
the printer to keep downloaded resources in memory under...

To determine how much memory to allocate to a personality
You are most likely to want to change the amount of memory if you
download an unusually large number of fonts, or if your printer is in a
shared environment. The minimum amount of memory you can allocate to
Resource Saving is 400 KBytes each for PCL and PostScript. (The
minimum amount may be different for other printer personalities.) This
needs to be configured only if PostScript or another personality is installed.
1Press[Menu] untilMEM CONFI\b...