HP LaserJet 4250 User Manual
Here you can view all the pages of manual HP LaserJet 4250 User Manual. The HP manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 241
Service menu The Service menu is locked and requires a PIN for access. This menu is intended for use by authorized service personnel. ENWW Service menu229
Page 243
C Specifications HP LaserJet 4250 or 4350 series physical specifications Product dimensions Printer modelWidthDepthHeightWeight1 HP LaserJet 4250, 4250n, 4350, and 4350n418 mm (16.5 inches)451 mm (17.8 inches)377 mm (14.8 inches)20.2 kg (44.5 lb) HP LaserJet 4250tn and 4350tn418 mm (16.5 inches)451 mm (17.8 inches)498 mm (19.6 inches)27.2 kg (60.0 lb) HP LaserJet 4250dtn and 4350dtn418 mm (16.5 inches)533 mm (21.0 inches)498 mm (19.6 inches)29.7 kg (65.5 lb) HP LaserJet 4250dtnsl and 4350dtnsl418 mm...
Page 244
AccessoryWidthDepthHeightWeight Stacker211 mm (8.3 inches)427 mm (16.8 inches)351 mm (13.8 inches)4.2 kg (9.3 lb) Stapler/stacker211 mm (8.3 inches)427 mm (16.8 inches)351 mm (13.8 inches)4.2 kg (9.3 lb) Printer cabinet/stand330 mm (13 inches)686 mm (27 inches)660 mm (26 inches)19.8 kg (43.6 lb) Duplex-printing accessory2.5 kg (5.5 lb) Envelope feeder2.5 kg (5.5 lb) Printer accessories (continued) 232 Appendix C Specifications ENWW
Page 245
Electrical specifications WARNING!Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. This can damage the printer and void the product warranty. Power requirements (HP LaserJet 4250 or 4350 series) Specification110-volt models230-volt models Power requirements110 to 127 Vac (± 10%) 50/60 Hz (± 3 Hz)220 to 240 Vac (± 10%) 50/60 Hz (± 3 Hz) Rated short-term current10.0 Amps5.0 Amps Power consumption HP LaserJet 4250 or 4350 series (average, in...
Page 246
Acoustic emissions Sound power and pressure level1 (HP LaserJet 4250 or 4350 series) Sound power levelDeclared per ISO 9296 Printing2 (HP LaserJet 4250)LWAd= 6.9 Bels (A) [69 dB(A)] Printing2 (HP LaserJet 4350)LWAd= 7.1 Bels (A) [71 dB(A)] Ready (HP LaserJet 4250)LWAd= 4.0 Bels (A) [40 dB(A)] Ready (HP LaserJet 4350)LWAd= 3.8 Bels (A) [38 dB(A)] Sound pressure levelDeclared per ISO 9296 Printing2 (HP LaserJet 4250)LpAm= 62 dB (A) Printing2 (HP LaserJet 4350)LpAm= 64 dB (A) Ready (HP LaserJet 4250)LpAm=...
Page 247
Operating environment Environmental condition PrintingStorage/standby Temperature (printer and print cartridge)10° to 32°C (50° to 90°F)0° to 35°C (32° to 95°F) Relative humidity10% to 80%10% to 90% ENWWOperating environment235
Page 248
Paper specifications For complete paper specifications for all HP LaserJet printers, see the HP LaserJet printer family print media guide (available at http://www.hp.com/support/ljpaperguide ). CategorySpecifications Acid content5.5 pH to 8.0 pH Caliper0.094 to 0.18 mm (3.0 to 7.0 mils) Curl in reamFlat within 5 mm (0.02 inch) Cut edge conditionsCut with sharp blades with no visible fray. Fusing compatibilityMust not scorch, melt, offset, or release hazardous emissions when heated to 200°C (392°F) for...
Page 249
The paper storage environment should be properly maintained to ensure optimum printer performance. The required condition is 20° to 24°C (68° to 75°F), with a relative humidity of 45% to 55%. The following guidelines should be helpful when evaluating the papers storage environment: ● Paper should be stored at or near room temperature. ● The air should not be too dry or too humid (due to the hygroscopic properties of paper). ● The best way to store an opened ream of paper is to rewrap it tightly in its...
Page 250
Envelopes with double side seams Double side-seam construction has vertical seams at both ends of the envelope rather than diagonal seams. This style might be more likely to wrinkle. Be sure the seam extends all the way to the corner of the envelope as illustrated below. 1 2 1 Acceptable envelope construction 2 Unacceptable envelope construction Envelopes with adhesive strips or flaps Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives...